Arlington DBVR1W-1 Low Profile IN BOX Electrical Box with Weatherproof Cover for Flat Surface Retrofit Construction, 1-Gang, Vertical, White

This is really a great electrical box for an exterior wall, provided that the wall is deep enough. Usually, it will require a 2x6 framed wall because of the 5" depth. The exterior flange makes it possible to install this in either new construction or as a retrofit. The clean lines and low profile are much better looking than the alternative products with bulging covers, and harmonize with the flat surfaces of most walls.The box is very sturdy and made with sunlight-safe plastic. It has multiple knock-outs on all sides and comes with a NM cable bushing. It would also be easy to attach conduit to it with a 1/2" connector. You supply the receptacle in your choice of styles. A GFI would easily fit. It sits deep enough in the box that a cord can be plugged in and folded down to exit the bottom with the door closed.In my case, I had access to the back of the box and was tapping into power at a nearby interior outlet. It was convenient to install NM bushing, outlet and short length of NM cable before installing the box. Then by tilting the box, the cable can go in first and then the box attached to the wall.My only complaint with this product is the cost. It feels like a rip-off at almost $40, and could probably be sold profitably at half that. But the competition is not cheap either. At least it is nice to have a good quality option compared to what is typically found in the box stores

I like the fact that the cover is transparent. It's a perfect fit for my Arlington receptacles.

I've installed it in a cemplank flat soffit. If the asin page exists in 8 years or so, I'll check back and let you know how it held up with the sunset hitting its smallest profile, but it looks like it'll go the distance. This kit ships with; a pair of packages with internal face plate options; a package with a series of additional machine screws of varied lengths which mostly appear to be intended to mount the box to either flat or sloped surfaces; a length of adhesive backed foam which I might not use; an instruction & hole template with several different mounting scenarios well explained and illustrated; and one bushing.

I got this to replace an old surface mount box while doing some rewiring work. I liked that it mounted inside the wall, and there are not many other options in that area. The product that I received exceeded my expectations so much that I am committing to this brand for all future projects.Everything you get with this kit is well thought out and durable. The screws for mounting are all included, and they are quality stainless steel. The ones that attach the cover trim plate have painted heads to match the color of the box. There are two rolls of rope caulk to seal between the box and the siding and between the cover trim and that. For inside the box, there are two 1-gang outlet plates, one for rectangular GFCI and one for regular duplex.The plastic is thick and durable and sure to last a long time. Take the external cover off to get it out of the way while installing the outlet inside. There are two notches in the bottom edge of the box to pass power cords through while keeping the external cover snapped shut, with small black removable tabs in them to keep bugs out when not in use. Hang on to those, toss them inside the box when not in use--there's plenty of room to keep them there. You could probably keep a sandwich in there for lunch too.Installation was easy as far as old work electrical is. I had to work some complicated angles to get the wires through the wall of my 100-year-old house. But a utility knife and a keyhole saw were all I needed to cut the siding and wall board for the box. Take your time to get a nice, good, tight fit.

Good quality, good instructions.

A tad pricey, and I was fearful of cutting out a brick successfully, but as you can see, it's a lot nicer looking than the typical big box store products. (It came white, I painted it black)Second set of photos are of my second installation. (Back Yard)... Twice now, I'm very very pleased. Two thumbs up!

Worked great. The instructions were easy to follow.

Works great, will buy again

Awesome product, exterior outlets were the perfect fit for my cottage!

Great product. Never seen such a well engineered item as this.