NIBBI Replacement Orginal High Performance CG Intake Manifold Air Joint Boot Connector for Motorcycle Motorcross Dirt Bike CG

Exactly what was needed would recommend

I’m a NIBBI fan so yes buy it!

The product seems really nice and it fits the nibbi 28 very well but it is too small for my KP mini

It dose not fit niddi

Unless you grind one side of the head on the bolt it will not work but overall I'm quite satisfied on my ct90 application

When manifold piece is in rubber boot the bolts don't have room to fit thru holes (can't get past the edge of the rubber boot) & you can't get the nuts onto the bolts because the bolt is right against the rubber boot. The manifold piece is useless but the hose & clamps are of some value. You can saw off the end of the existing manifold & slip on the rubber boot & clamp it down.*CORRECTION: they included ONE small flat-faced machine screw with the manifold which works if you reverse it's entry & screw on the nuts on the outer side of the manifold. Unfortunately the ONE screw they included was much too short but I was able to match it up at a hardware store.So far I've bought 4 products from and this is the constant: they don't provide ALL the screws and most of them are the wrong size or wrong type for the application. Pretty terrible QC on the packaging end.

Fit the nibbi carb well bike runs awesome now boom vader btw

Loved the look and material. Will last 'll ger than others