VIVOPremium Aluminum Heavy Duty Monitor Arm for Ultrawide Screens up to 49 inches and 33 lbs, Single Desk Mount, Pneumatic Height, Max VESA 100x100, Black, STAND-V101G1

The monitor I am using is the SAMSUNG 49" Odyssey G93SC Series OLED (27.80 lbs). There are different versions of this type of monitor, with minor variations in the back mount. I read all of the reviews where people said this monitor arm would fit the G9, and during installation, those statements came into question.If you take the factory monitor mount off of this monitor, you cannot directly connect this VIVO Premium Monitor Arm straight to the monitor as is. You will need the black metal wall/VESA mount that comes with the Odyssey monitor. I received my monitor about a month ago and, luckily, held on to it. With this part in hand, installation is rather easy.As others have noted, there is some sagging taking place with this monitor once installed. I've tightened (greatly, as it seemed to have too much torque) the specific bolt that manages this articulation, and the sagging is no longer present. We will see how this holds over time. I will update this review if I have future issues with sagging. I live rather close to a railroad, so the slight vibrations will really put this bolt to the test. We will see.The movement of the arm could be better, but for the price, this is great.To any who has purchased or plans to purchase the SecretLab Magnus Pro XL Desk, this monitor arm definitely fits this desk. During the extensive research of building my office, this was a concern I saw all over the internet. I bit the bullet and purchased this monitor arm without knowing for sure if it would fit or not, a sacrifice for my fellow computer nerds that paid off. Currently, SecretLab does not have a monitor arm for sale that can support a monitor of this weight, but that is supposed to change soon, according to their website. Please do note that you will come across some installation issues when installing this monitor arm to the Magnus Pro XL; luckily, I am here to walk you through that process. *kiss face emoji*The cable management tray is not too shallow to initially place the monitor arm, but it is too shallow to tighten the bolts on the bottom of the clamp to ensure your arm doesn't slide around. There are at least two ways to tighten the bolts; I know this because I mounted the arm in the center of the desk, fastened the bolts through a rigamarole process, and then realized that the monitor arm needs to sit several inches to the left to properly center the monitor on the desk. The second go around, I found a quicker way that involved tools that didn't come included. Below are both of the methods I used.How to tighten the clamp on a Magnus Pro XL Desk WITHOUT extra tools::- You will need to remove the two screws on each side of the desk that hold the cable management tray in place (4 screws total). Then you make your way to the remaining four screws on the bottom of the desk that hold the cable management tray in place. You DO NOT need to completely remove these screws; only loosen each screw a couple of turns, and the tray will sag enough to allow you to get the Allen wrench inside to tighten the monitor arm clamp bolts. Don't make my mistake; ensure that your monitor is positioned on the desk where you want it before tightening these bolts. You don't want to have to do this again. I moved mine 5-6 inches to the left of the center. The center can be found by looking at screw placements on the inside of the cable management tray. Once the bolts are tightened, tighten the 4 screws on the bottom, and reconnect the 4 screws that go on each side.How to tighten the clamp on a Magnus Pro XL Desk WITH extra tools::- Take a Dremel tool or any other saw/torch/etc., and cut the Allen wrench to a shorter length. I've included a picture of how short I cut my Allen wrench. This method is 100 times easier than the first.I gave this monitor arm an overall rating of 5 stars, mostly because of the price. As for Sturdiness, I gave this monitor arm 4 stars due to some crucial parts being plastic, Easy to assemble got 4 stars, and Range of motion got 4 stars.I would recommend buying this monitor arm, though if you have the patience, the SecretLab Ultrawide Monitor Arm should be available soon; that one will likely be a better quality and also look better.

This product gives Ergotron a run for your money, very reasonably price (1/3 the price actually) and solid performance. The arm works well with Samsung Odyssey G9 with no to little wobble once the tension of the arm is adjusted. It's simple to put together. Placing the monitor and adjusting the tension certainly requires 2 persons for the G9. Some reviewers said that the pneumatic arm doesn't hold up well. Fingers crossed.The kit is designed to be used with flat monitor. You need an adapter to use it with a curved monitor. Luckily the G9 came with one. So no extra cost for me. If possible, get the model for tall people even if you're not. It's much easier to adjust how deep you want the monitor from you.

I have been looking for an arm for my 45 lg and couldn’t get a clear answer about this one. So I decided to buy it and try it. I have no complaints at all. It’s most sturdy if you add a board, but i would do this even with a 500$ mount. It’s not gonna fall if you take your time and adjust the bolts for tension. Always add a touch extra, even with small monitors. It hold perfectly. No wobble unless I bump my desk. Moves freely and easily when I need it. I think people don’t tighten the tension enough. It’s supposed to be a little stiff when u let go and free up when it starts moving.If you’re looking for the 45 lg oled ultragear then this works!Installs easy. Common sense. Took about two minutes to install the second one once I took my time with the first.They don’t tell u but it has a little tool holder on the back so u can adjust tension on the fly! That should be advertised.Usb iWorks great! Audio cable isn’t really needed these days.Highly recommend!

Overall no issues and fits what I needed. It was a bit difficult finding something that utilized the hole in the center back of my desk which was my primary driver for getting this particular stand. My one gripe is a centering issue. I can't put the bent arms straight back because it's up against a wall, so fine they're positioned parallel with the back edge of the desk. However, in this configuration the monitor lines up about 5 inches off center. It's not ideal, and only somewhat offset by having a second monitor to the "short" side to distract from having to have my head turned slightly all the time.

This device has worked exactly as described by the seller and the manufacturer's description. It holding my large curved monitor very well and gives me the ability to turn the monitor around easily, simply by turning the monitor in the mount (stand doesn't need to move) to leverage it as a full fledged TV for the room for others when necessary.

Bought this to support a 34" ultrawide to stack on top of my 57" ultrawide. assembly was easy and it's quick to put together. took probably 15 mins or less. the monitor arm is strong and sturdy and easily supports the weight of the 34". i can move it around no problem without any issues. i like how it had slots on the covers to hold the hex keys. makes it easy to grab them whenever i need to make adjustments. I can angle it down for better visibility when i'm looking up at the monitor.my only con is that the mount arm was initially not high enough to clear my 57" monitor. I had to stack some stone coasters under the desk clamp to raise it up a few inches, which seems to be working just fine.overall great arm, just wish it was a bit higher.

After trying multiple arms that always sagged from the weight of the monitor I almost gave up on the idea all together…until a friend recommended this one. This thing is a beast and holds up my 34” ultrawide OLED monitor amazingly. The movement & adjustment is flawless as well. Honestly, it works so well that I’m considering getting an additional 45” OLED monitor for my setup and am completely confident I can get another one of these to hold it without any issues.