Oscar Loft Bunk Bed including Sprung Mattress (20cm), 3ft Single

Very happy with this bed. A friend recommended it, we now have 2 and they are very sturdy unlike many other similarly priced beds on the market. No creaking or wobbling. Good space underneath. One child has toy storage and play space, the other has made a reading den. The instructions take a while to decipher, I recommend patience and choose a time you’re not in rush :-)) sit down, read them thoroughly, they eventually start to make sense. And the actual assembly took no time at all. My husband put one together in an hour with just a bit of help from me.

My daughter is delighted with her new bed. This bed frees up space to play in the box room so we can make the most of it.

Solid wood, must be screwed to the wall otherwise it will wobble a bit.

Well from ordering and being told delivery would be around a week for delivery, we were blown away when it turned up after only a couple of days which was great! We opened the boxes which were packed well and opened the instructions.Biggest advice is to read the instructions, so we started with a cuppa and read through the whole instructions manual before starting. You definitely need 2 people to build, and it took us approx 4 hours with a small break to complete. Overall it wasn’t the worst flat pack we’ve ever built the instructions were thorough, but a few places they weren’t 100% clear (the part about the glue and also where to screw the rail guard as the image didn’t actually show this). But we watched the YouTube videos available to help where we needed to and we finally got there in the end. I have to say it’s worth every Penny, it’s incredibly sturdy and a great size for that slight extra height under the bed so our son can watch his tv and play in comparison to some of the small cabin beds we’d looked at. Only thing I would say is don’t kid yourself by not reading the instructions, they’re lengthy but for good reason follow them and you’ll have no trouble. Only issues we did have was the Allen key didn’t really withstand so luckily we had a better one at home and you’ll also need a flat head and Phillips screwdriver or electric drill ideally if you want to save your hands, which we didn’t have and probably accounts for the extra time it took to build. Overall fantastic purchase especially while on offer to. We have one very happy little boy and wouldn’t hesitate to buy again from this company.

Bought this for my daughter not very sturdy at all but it will do for now and was in a rush to buy a bed. The good thing is I could fit all her toy kitchen and toy boxes underneath so more room to play

I would love to give this higher as once assembled it seems nice and sturdy but there are a few issues. The instructions are absolutely awful, it's very hard to distinguish in some of the pictures which screws to use, as in one picture it was a completely different screw so we had to look through the rest to work out which screw we should use. We've also noticed once assembled that the sides/frame /base (where the mattress sits and where the slats are attached) is actually at an angle and slanted, it would appear the holes are at different heights in the main frame. Hopefully this does not have an effect on the sturdiness. We've also noticed that the top rail is quite wobbly due to the way you have to attach it to the rest of the frame so we will have to see how that holds up.

The high sleeper bunk bed is great, value for money product. However, you must keep in mind that it is a solid pine wood so it is two people job! It can be done by one person however it might be difficult to avoid breaking like it happen to me. Also, check your walls before you get the bed. You need to follow health and safety advice provided by the manufacturer. This means attaching the bed to the wall. It cannot be done without a proper equipment to drill through the masonry wall. I had to attach the bed to the skirting board which is not ideal.

This bed is a great height as it's lower than most high beds but, quite a few important slats are warped so you have to really move them for them to fit and the ladder has 3 steps and really needs 4