

🎛️ Elevate your sound game with precision and power — don’t just listen, experience it!
The Behringer SUPER-X PRO CX2310 is a professional-grade stereo 2-way/mono 3-way crossover featuring advanced 24 dB/octave Linkwitz-Riley filters, an independent subwoofer output with frequency control, and individual gain and mute controls for each band. Designed for audiophiles and sound engineers, it delivers flat summed amplitude response with zero phase difference, ensuring transparent and precise audio performance at an unbeatable price point.






| ASIN | B07J37C68Z |
| Best Sellers Rank | 1,400 in Car Audio & Video Accessories |
| Colour | Black and Silver |
| Connector | 1/4 inch audio |
| Country Produced In | china |
| Customer Reviews | 4.4 4.4 out of 5 stars (380) |
| Date First Available | 7 Feb. 2007 |
| Hardware Interface | 1/4-inch Audio |
| Item Weight | 3.4 kg |
| Item model number | CX2310 |
| Material Type | Plastic, Electronic Components |
| Power Source | Corded Electric |
| Product Dimensions | 48.26 x 4.45 x 21.49 cm; 3.4 kg |
| Signal Format | Analog |
| Styling | Crossover |
| Voltage | 9 Volts |
D**S
Quality crossover
Excellent product certainly worth the money delivered in super quick time
K**.
Brilliant xover saved me a fortune
Hi have a high class home audio system with twin power amplifiers 2 passive speakers and 2 powered subwoofers - I tried the Jl Audio CR1 crossover at £3200!! I then took a chance and purchased this Behringer for £57 oh my god it's absolutely fantastic - superbly transparent no noise although the first one had a bad hum so got a replacement - this 57 quid crossover told me that 1 sub was all I required so sold the one sub for 2.5k and did not purchase the £3200 cr1 - unbelievable - thank you Behringer!
O**D
top processor
I got this for my friend who does small pa work for bands and he is very pleased with it, he says it does what he wants it to do, this is a super crossover unit & you do not have to spend hundreds of pounds when unless you are doing large events this will do the trick. at this price this unit is a bargain.
O**M
This is a good value crossover by Behringer
This is a good value crossover by Behringer, I use it with one of their small mixers to run my studio monitors and subwoofer and it's a good value solution. It's nice being able to adjust the input and output levels of each channel and the muting and phase switching can be useful. I personally find there's too much overlap and the frequency adjustments seem far too vague so I can't seem to tune everything exactly how I expected but in general it does what I want it to do for a very cheap price.
U**N
This is value for money and quite neat 👌
This is exactly what I wanted, it's easy to set up and adds quality to mid and bass and definitely value for money .
D**E
Great quality, no audio pops
My previous crossover did some horrible audio popping during power on/off, but nothing like that from this unit! Really happy with it.
B**O
Excellent, Behringer who are well known and I am ...
Excellent, Behringer who are well known and I am using this 2 way with a bi-amp setup, 2 bass and 2 tops. If you want to get the most out of passive speakers this is the way to go, and this is also the cheapest xover.
A**R
Poor reliability.
Bought as a replacement for the same model which died after 18 months use in my living room. This one failed after only three months. Under no circumstances would I ever buy another despite the low price.
-**-
Hey I got this to replace (other brand) Small Box / SX45 Two Way Crossover. It works well. I'm using it with my Old Yamaha receiver, with the jumpers taken out which makes it / switches it to a PREAMP. so Using for now as a 2.1 setup. Currently I only have 1 sub, I set the Behringer SUPER-X PRO CX2310 V2, crossovers according to how I want it, adjusted the levels etc.. I am using the subwoofer output for now, but Once I Get 2 subs, I will switch to the dual low outputs. Hopefully it works just as well. so it would then be switched to a true 2.2 Stereo setup (2 / Stereo subs) I'm not a pro audio guy, but I Can say this works better than my previous SX45 and I Like it a lot. It's very thin or little depth in dimensions, I just put a short padding(old mouse pad/mat cut) at the front of my Yamaha and put the Behringer right on top. Most of the Yamaha preamp heat comes out the open space / section about mid-way back on top so it's fine. This is a great product. Even though it's look, and design if more pushed / put out for PRO AUDIO, I Can say it works great as a Home Audio Crossover, at least in my style of setup. It adds a lot of control to your setup, try it out. it's pretty easy to understand how it works. When using the actual dedicated sub out, personally I set mine to about 50/55Hz, and my speakers crossover to about 60Hz~ around there. This is how online guides, and people say to do it because the missing Hz/ Section is in a way added together by the high and low roll offs. I Don't know how else to explain it in my knowledge/wording.. but it works. Also go by your ears and understanding. Side note: My Speakers are low sensitivity 84dB, There is a tiny amount of hiss from the tweeters with the input and high output levels set to 0. I Don't mind seeing it's such a small amount of hiss and is normal in most cases(And is only noticeable putting your head / ear close to the speaker/tweeter), but I don't know how this would fair in HIGH SENSITIVITY SPEAKERS, Would there be a lot more HISS, I'm not sure. In the end you can also turn the levels down on the Behringer. Also the hiss could be dependent on the gear used beyond/before the Behringer Crossover. Take care and good luck trying out yours.
D**C
Rapporto qualità prezzo top. Per piccoli impianti è perfetto. Regolazioni efficaci e buon audio
S**T
The latest version of the Behringer Super-X Pro CX2310 v2, a 2 Ways Crossover was delivered by Amazon Canada at time. In advance, I modified my 35 years old stereo JBL 250Ti speakers inside wirings to BI-AMP by myself, the 14 inches woofer passive low frequency crossover is isolated from the passive high frequency crossover which connects the 8 and 4 inch, and the titanium speakers. A Bi-AMP speaker terminal with separated High and Low Frequency terminals are added at the back of the speaker. Sound Equipment used: (1) A Behringer Super-X Pro CX2310v2; (2) A Sound Town ST-UPDM4C 4 Channels @950W RMS Class D power amplifiers; (3) A Yamaha WXC-50 MusicCast Preamplifier. (All there of them can be bought through Amazon Canada). Stage One: A new Sound Town ST-UPDM4C 4 Channels, @950W RMS Class D power amplifiers are directly connected to these two BI-AMP modified JBL 250Ti speakers for a test drive. The speakers inside wirings are proved being modified right, improvement in clear sound quality and bass dynamic are noted instantly, these test connections are as shown in the photos. Stage 2: The active Behringer Super-X Pro CX2310 v2 crossover frequency is set at 400 Hz for 2 ways BI-AMP driving. This is connected with my 35 years old grey color unbalanced OFC audio cable, as shown connected in the photos, from my Yamaha WXC-50 unbalanced pre-amplifier to the balanced Behringer Crossover with adapter. My Behringer Crossover is XLR cables connected to my Sound Town ST-UPDM4C 4 Channels power amplifiers for driving my 35 years old JBL 250Ti BI-AMP modifications. This Behringer Super-X Pro CX2310 v2 crossover processes with crystal clear music, sweet vocal sound quality supported with flat, solid and punching bass for my Sound Town ST-UPDM4C 4 Channels @950W RMS Class D power amplifiers in driving my 35 years old JBL 250Ti BI-AMP modifications with wide dynamic and deeper sound field delivering much advance clear sound quality improvement. Stage 3: Stereo 2.1 single subwoofer connection test of the Behringer Super-X Pro CX2310 v2 which is set with subwoofer crossover frequency at 100Hz to drive the JBL LS120P 12 inch self powered subwoofer, while the Mid/High crossover frequency is set at 2.6KHZ to drive the JBL LS40 BI-AMP speakers with the Sound Town ST-UPDM4C 4 Channels @950W RMS Class D power amplifier. (This JBL LS120P 400W amplifier was burnt a few months ago, I repaired this subwoofer by replacing with the Sound Town STAPS-600D 400W RMS Class D Plate amplifier, so it can connect directly with XLR cable to the Behringer subwoofer terminal). And Yamaha WXC-50 is still being connected as the preamplifier. As expected, this match-setting also delivers much advance clear sound quality improvement. The Stereo 250Ti speakers are Titanium design and two 14 inches woofers, with one for each speaker; while the Stereo 2.1 LS400 speakers are Horn design and with only one 12 inches woofer. So the Stereo 250Ti speakers deliver better BASS experience from the two 14 inches woofers but the Stereo 2.1 LS400 speakers deliver better VOCAL experience from the horn speaker in sound nature for music listening. Great values and sounds. No HUMMING at the two 14 inches woofers of the JBL 250Ti speakers nor at the JBL LS120P 12 inches woofer! I enjoy very much the experience of this BI-AMP modification and the purchasing support of Amazon Canada.
D**S
Bom produto!
K**K
40年前のビクターの25センチフルレンジSPと、もらい物の車載用ツイーターをネットワークで聴いていたが、どうあがいてもバランスが取れない。ついに、禁断のチャンデバに手を出してしまった。1万2千円。ダメモトで購入したが、これがどうも具合が良い。ガラクタが宝物になりそうだ。 LOWには50年前の自作管球アンプ(部品交換済み)を、HIGHTには2千円の中華アナログアンプを新たに購入した。ケーブルはジャンク箱にしまっておいたベルデンを、SPケーブルはこれまた友人のジャンク箱に入っていた「切れぎれのWE」をつないで音を出している。 音質はやや柔らかいが透明度の高いコクのある音質で、これはアンプやケーブルにもよるので一概に本製品の特徴とは言えない。試みに、ケーブルを1,000円程度の中華製に、SPケーブルを普及品に交換したら、やや平べったい音になった。 要するに本品は「素直な機器」なのだろうか? よくわからない部分もあるが、遊べる12,000円です。 <追記> 電源プラグはアース付きの3本端子で、一般のコンセントには差し込めないものだったので、思い切ってアース端子を切り落としました。(ナント乱暴な…)それでもノイズなどの問題は起こりませんでしたので、自己責任で…。
Trustpilot
1 month ago
2 weeks ago