Havells Swing High Speed 300mm Wall Fan (Off White)

Good product from Havells. It's a fantastic model and is equipped with state of the art features and technologies. It's a value for money product. The speed of the fan is quite good. It has good airflow and the ease of use and remote control has impressed me.

Angel is not available, it should be 90 degree

Writing this after using this fan for almost 3 years. Brought it in Diwali sell for 1650/- after care discount in Oct 2021.If you are looking for really high speed high quality product in reasonable price... No math for this Fan. Speed is just high Breezer, till date we use this fan atleast 4 hrs everyday and working like new one.I keep cleaning Blade and net regularly.Must buy product.

Good Air Flow and Good build quality

Poorly designed product.While assembling it is easy, it is not easy to fix its vertical position (cf. oscillation movement is horizontal) to a desired direction.The vertical position is to be fixed, as I understood from the bare minimum instructions given with the product, by tightening the bolt/nut combination.First of all, the caps that are inserted over the Nut/bolt on either side (for aesthetics) are extremely difficult to dislodge. These caps have to be removed to tighten the nut/ bolt. Finally I had to insert a hole in the caps to prise them out thereby destroying them. The cap design itself is bad. With two locking arms, they lock themselves at the bottom of the pit/ recess in which the bolt/ nut are located (see the picture, where the holes for locking are located - at the bottom of the pit, below the Philips-Head Screw/ bolt). Normally, the caps should have locks at the top of the pit/ recess making it easier to prise them open. I wonder anyone at the factory ever tried to remove the caps once they are fixed in place! If there is any other method, the same is not given in the instruction sheet.Secondly, however you tighten the bolt/ nut, the fan-head will not remain in position because this vertical movement of the fan head is spring-loaded. I tried removing the spring and then fixing the head in a specific desired position; it does not work as the bolt and nut cannot hold the head in a specific position even without a spring. With the spring in place, vertically the fan aligns itself to only one position - as dictated by the temper of the spring. The spring is a strong one and hence the fan head cannot hold itself against the spring. Ideally, the temper/ force of the spring should be less than the pressure the head exerts including the gravitational force, aided by the bolt/ nut. The spring is so strong that even the bolt/nut too cannot hold it place.Hence, I used a 'stopper' (a piece of old wire) of appropriate thickness to keep the fan in the desired vertical position (see the picture). If I have to change the vertical position to another desired level, I will have to find a stopper of suitable thickness to achieve this.Instead of this existing design,they could have given two interlocking plates with 5/ 10 degree movements. Then there would be no need for a spring.I could have returned the product, but I experienced this issue when I was getting it installed, which happened after more than a month of delivery.Otherwise, the fan's breeze and throw are good. There are no complaints about it. It is also fairly less noisy. Havells Swing Dzire 300mm Wall Fan (Light Grey)

Installation service is good

Speed and performance ok, but oscillation not working properly

Havells Dzire 300mm wall fan is low noise and good performance fan. We have installed it in our bathroom and liked it.