TCMT Universal 32mm Foot Pegs Mount Fits For Harley Touring Road King Street Glide Road Glide Electra Glide Softail Sportster XL 883 1200 Dyna with 1.25" Engine Guards

Currently awaiting seller to contact me back. One of the highway peg mounts completely stripped out of the threading as soon as I started attempting to tighten it down, not allowing my to securely fasten the highway peg to the bars. The mounts also required quite a bit of dremal work to get them to fit onto my highway bars. It’s not the powder coat on the mounts, it’s actually a lip that they have on the small side of the clamp which bits into the bar before you can actually get it to seat. I had to full remove the lip to even get them started on my bars.They seem like they will be good pets as long as I can get a replacement for the one that stripped out.

Actually have these installed on a Honda cb1100ex with HW Motech crash guards. They were installed with rubber spacers, which I cut from a piece of rubber material I purchased separately. They are working great and even though they’re made for a Harley they’re working fine for me.

I got this as a gift for my fiancé and when he tried to install them on his motorcycle the threads stripped immediately with minimal pressure. The customer service upon returning the item was good though, which I appreciated.

Threads stripped from the bolt hole before it even got close to being tight. Bolts are different lengths etc.... Having to end mill the clamps to get them all alike then drill and tap for 1/4x28 (stainless bolts). Pretty sure they've been using the same thread tap on these pegs for about 60 years. Checked the other peg before I attempted the install and the bolt screwed into the clamp (as far as it would) and wobbled noticeably. Be prepared to put another 50/60 dollars in your own time and labor to make these right.

Excellent choice as a less expensive alternative to OEM Harley parts. Saved me $75. Matches my stock floor boards on my 2018 Harley Street Glide Special exactly. Took a little adjustment to get them just right on the engine guard but that is expected with any highway peg set.

Did not really fit on my OEM 2019 Road Glide special crash bars. Had to us a dremel tool to shave down the inside edges. Once that was done, they fit nice. Weird washer on them too however, it should and probably does go on the inside of the nut and bolt but no way of getting it in there.

Great pegs... The clamps are tight enough that I needed a mallet to seat them on my highway bars... The screws are too short ,I had to replace them (home depot)... They feel good under foot

will ot fit crash bar with out filing down powder coat and some of the metal.Some of the powder caoting was peeling off the clamps right out of the box, very poorly made junk

Solid. Well built easy to install

The screw top bolts that were to clamp the pegs to the crash bar are only 22mm(too short) I am waiting for TCMT to correct the problem so I can install the foot pegs.

nice on highway able to move legs around to get rid of cramps when riding

Bon prix belle qualité