4 inch Casters Load 2400lbs -Includes Complete Screws Sets with Accessories -Lockable Bearing Plate Heavy Duty Caster with Brakes, 360-degree Swivel for Furniture and Workbench Cart, Set of 4

These casters serve their purpose well. Very sturdy. Have ordered multiple sets to support a variety of my overbuilt workbenches. Same satisfactory result each time. Not disappointed. The roll smoothly and quietly under load, and the locking mechanisms are easy to manipulate and function as intended. Easy install.

I've ordered several sets of these casters. I use then on my rolling work benches and vacuum dust collection cart. They lock easily and solid. They roll over small obstructions like electrical cords and small pieces of wood without hanging up. They swivel nicely so you can move your carts in any direction. A good buy that does the job.

I purchased these casters with one purpose in mind - to mount them to the feet of my 2 Life Fitness/Hammer Strength dumbbell racks. I have a complete set of pro-style dumbbells (now very rusty from sitting in storage for 10 months) 5lbs to 100lbs. I just bought a new house and, until I can build a new 20’ x 30’ gym, I’m using the garage. With that in mind, my wife still wants to be able to use the garage to park her car in when it’s going to snow so I needed to make as many pieces of my weight lifting equipment as mobile/transportable as possible. Each of my dumbbell racks weighs 200lbs empty. The lighter rack weighs 1000lbs loaded with dumbbells and the heavier rack weighs 1,500lbs loaded with dumbbells. I built blocks for all 8 feet of the dumbbell racks using 2 - 3/4” x 3-5/8” x 6” maple plywood that I laminated together with glue and screws. Then I drilled holes for where all 4 of the (5/16” x 2-1/2”) caster bolts would go and drilled 2 larger holes for where the (7/16” x 3”) dumbbell rack feet bolts would go. I used 3-prong T-Nuts to secure the casters to the blocks with 5/16” bolts.This worked perfectly. I installed the blocks and casters onto the feet of the racks before I removed them from storage. This made moving them out of storage and into my house MUCH easier. Don’t get me wrong, the 1,500lb dumbbell rack isn’t easy to move by any means, but that’s relative and it DOES move. I said that’s relative because, in comparison to how easily the dumbbell rack was able to moved prior to installing the casters on the feet of the rack, it’s night and day. The racks stay put when I engage the brakes. The bearings are very smooth and all of the casters swivel as they should.Overall I am EXTREMELY satisfied with these casters and can confirm that they hold AT LEAST 1,500lbs. That being said, I’m positive their 1,800lb weight rating is accurate.You will not find a more affordable, better quality, heavy duty caster.My only minor and insignificant complaint is that the casters brakes don’t engage at perfect 90 degree, 180 degree, 270 degree & 360 degree intervals (perfectly parallel and perpendicular to the mounting plate). This isn’t a big issue at all though. I am fully aware that this is more so an issue with my OCD. Put it this way, this “issue” isn’t enough for me to change my 5-star review.BUY THESE - YOU WILL BE GLAD YOU DID!

Easy install, good size and quality caster. Nuts and bolts were loose in the box and a few were missing. The bolts are also fairly short, I had to use some others that I had to install the casters on my cart.

Good, heavy duty casters for my workbench. I recommend them

Excellent product. This is my 3rd or 4th time ordering these casters. At 4”, they roll smoothly around the shop and any bumps or small amounts of debris on the shop floor.

Made a big dolly to slide a 435-lb brush cutter around in the garage. Originally used wheels supposedly rated for 100-lb each and they failed in the first 10 feet of travel. Could not go with taller casters because of the limited lift of the tractor. These casters are rated at 200-lb each. They have no trouble moving the brush cutter around on a concrete garage floor. They each sport a foot brake if you want to use it. Kit comes with the casters, screws and washers. You also get a nice screwdriver you can throw into the kitchen junk drawer. Will order more for a saw table. Thicker steel yoke, nut-n-bolt axle, swivel easily under load. Should last many years.The BLUE casters pictured are the ones that failed. The RED casters are beefier and have no issues with them.

I built a tray in order to move my power tools in and out of my garage. Things like my compound miter saw, table saw, clamping sawhorses and other items that are bulky and heavy. I first build the platform, two pieces of three-quarter inch plywood opposed to each other 30 x 36“ and then surrounded by a one by four board on each corner to keep the tools stands from moving off the platform. When I first built this I had purchased some less expensive casters from a local Home Center, they were totally ineffective. I was well below the weight limits for the first ones I purchase. I thought these were really over doing it but at the same time I did liked the style and the foot break mechanism . Absolutely the right product to buy and extremely well worth the price. Before when I would roll the platform the wheels would cross up and do all sorts of weird things. I still have black marks all over my garage floor that I have to get up. With these it’s amazing, when you release the break to move they move, no problems whatsoever, even goes over extension cords and other items as if they don’t exist. The only drawback is that my neighbor keeps waiting for it to roll over into his garage. Most of us do not buy things like this every day, I certainly don’t. But I will tell you that I am very impressed, as well as my neighbor who is an engineer. He looked at the products and said damn these are good, I agree.