Finish Line 1-Step Cleaner and Lubricant

I switched to this cleaner/lubricant a little over a year ago. I was using the spray can but that made it a little difficult to keep the spray off of my rims. Which in turn would then get onto my brake pads. I am now using the squeeze bottle. It is much easier to apply the oil directly on my chain without getting it on other areas of the bike.Just apply some drips on the chain then wipe hard with a rag or shop towel. Rotate the chain and repeat. Wipe down and clean the buildup off the jockey rollers (plastic). Then just before your ride apply again but do not wipe as hard. Start out your ride by changing through all of your gears. This will do a good job of lubricating the gears. Of course, if your chain, gears and all are quite dirty or have build-up, you should clean them first.I find that I now mainly ride on paved trails and street, I don't have as much dirt build up. So, I use this to clean and lube twice a year and it works great. I ride approximately 700 miles a year.

I like how easy it was to apply it didn't leave a mess and didn't flick much at all when riding. A good weight for bikes. However I don't think I would use this if I was seriously training for a century ride... I would probably try and find a little nicer.

Yes, there are much better choices out there for your chain. But for summer here in SE PA, at least, this is a lifesaver when you're on dirt or gravel trails for days. That red shale dust quickly cakes all over your chain, cassette and pulleys, and this is thin enough that it actually washes that stuff clean. I keep a bottle of this wrapped in some rags in the outside pocket of my pack from May to November

No, it’s chain lube for bicycle chains. Works though. Stay on top of easy bike maintenance so you don’t have to do hard bike repairs. Would recommend. Good value.

I wanted to try "all-in-one" type lubricant. While this is inexpensive and works as a great lube, it did nothing to clean the chain. Note that I started with a very dirty chain. Maybe I should have cleaned it. My hope was that this product would kind of de-crud the chain over time. It did not.UPDATE: I finally cleaned my chain and got all of the crud off of it using other products. Since then, this product works as advertised. As such, I upgraded my rating from 4 to 5 stars.

I got this chain cleaner and lube since I ride my bike all the time, even in winter. I was hoping it would break up the rust brought on by the wet and salty streets. To my surprise it worked in a matter of seconds helping lubricate my chain along the way. My only regret is getting the squirt bottle instead of the aerosol spray as it’s difficult to evenly distribute across the entire chain. With that in mind the cleaner itself is excellent.

This is terrific for light duty cleaning and lubricating.

This stuff was to me a bit expensive, but it was worth it. I cleaned my chain one day with this oil and a rag and really worked it in the chain and cleaned up the old dirt and everything else that was stuck to my chain. After a nice work-through on the chain it was looking so super clean and nice I was dying to take it for a ride. I immediately burst down my driveway and jammed down the street shifting quickly to give it the true test. My bike is a mid-range Giant roadbike, just an FYI. This 1-step is exactly that, it was one step, and I used about maybe 40 cents worth of the oil, if that, and it was like I upgraded my gears. It is honestly the best thing for your bike. Now I am looking at my old mountain bike, that is a mid-range Iron Horse, and that chain is super black and dirty. This 1-step lube is going to break that chain down and make it shiny as all get out. I can't wait to see how it improves the shifting on that one.