Bundle: Pilot 24 Lite CPAP Battery with Cables Included for S9, Airsense 10 and AirMini CPAP Machines - CPAP Supplies, CPAP Accessories, CPAP Travel

This is the second one I bought for my air mini, because I lost the first one. It works well when you lose power, camping without electricity, sleeping in the car and lasts for hours!

The battery is very dense and heavy. But it works well. Includes the DC adapter with short cord to plug directly into the AirCurve which is not a very common fitting. Heavy but can be carried in the exterior pocket of the AirCurve carrying case onto airplanes, etc. Do not put this battery in your checked luggage - only carryon.

I use this battery with my travel cpap, the Resmed AirMini. It lasts about two nights (of 7 hours each) without recharge. I really like that with additional cables I can keep plugged into power and it sits there in stdby mode, as I travel quite a bit in 3rd world countries where power is always going on/off. Light, portable, def. the right choice. I also like that it has an LED light which you can turn on at night if your hotel room is so dark you can't see in the room. It just stays on and gives just enough light to do the job. Works great on flights too.

Was easy to install on my CPAP. It works good. I’ve had some power outages and never notice because my CPAP kept working.

I bought three of these: one for me, one for my girlfriend, and one to leave at my girlfriend's house for when I visit her there. I bought these so that they could be like a "UPS" for our ResMed AirSense 10 CPAPs, so when the power goes out in the middle of the night, we can keep sleeping. I haven't had the power go out yet since I bought these batteries, but I bought them because, in the past, the power *has* gone out, and I want to just sleep through it when it happens.So far, these batteries work as advertised, but they have some drawbacks that I will describe below.The good:- Battery worked well. I have not had to use it in a power-out situation myself yet, but I've used it for short periods on an airplane, and my girlfriend used it on a train trip where the power outlet situation was tricky. My girlfriend reports that she was able to use hers to sleep a full night on the train.- My girlfriend reports that the runtime was about 7 hours for her AirSense 10 CPAP. However, you must remember to turn off your tube heater and humidifier heater (as described in the instructions), otherwise your runtime would be much lower. Your mileage may vary depending on your CPAP pressure settings and the age of the battery.- Having a USB charger output on the battery is very useful. I have used that on an airplane trip.The bad:- The battery gives an annoying BEEP BEEP BEEP when it runs out of charge. I suppose that's to wake you up so you don't suffocate when your CPAP stops working. Personally, loss of pressure wakes me up anyway, but you might need that beep. The thing is, the battery doesn't know the difference between "I'm actually being used for a CPAP" and "I'm just sitting here". I had it beep at me in the latter situation, on a night when the battery had sat unplugged for a few days after having used it on an airplane trip. It was just sitting there on the nightstand, unused, and it went "BEEP BEEP BEEP". It should have been designed to allow you to easily disable the beep.- The extra-bright blue status LED shines all the time that the battery is plugged in. In some situations it can be annoying, enough to keep light-sensitive persons like us awake. I have to make sure that side of the battery is turned away from us on the nightstand.- The battery's shape doesn't lend itself well to being used in space-tight situations, where you don't have a lot of space on the nightstand. What I'm doing is placing the battery flat on the nightstand, and setting the CPAP atop the battery. This works, but the battery is smaller than the bottom of the CPAP, so it seems a little rickety like that, like playing CPAP Jenga. No problems with this arrangement so far.The really bad:- The cord is dangerously flaky. Details below.- I'm using the "output cord for AirSense 10" that was included with my two batteries. This is the cord that connects the battery to the CPAP.- My intended usage is to leave the battery plugged into the power supply, and have my CPAP plugged into the battery using the aforementioned cord. So that if the power goes out in the middle of the night, the CPAP should keep working and I would just sleep through the power outage.- On both of my units, the cord has gone flaky after several weeks of use. It does not make a good solid contact with the CPAP. The slightest wiggle will make the power go out on the CPAP, even something as little as the hose touching the cord (they connect next to each other on the back of the CPAP). Also, the poor/intermittent contact between the cord and the CPAP makes the cord heat up, so that it is physically hot to the touch, due to DC resistance. Once, even though I didn't wiggle the cord, the power stopped working while I was sleeping because of this heating-up problem.- Note that the battery was fully charged so it did not beep at me when the cord went flaky. I was awakened by the loss of pressure. So the aforementioned beep is even more useless.- I'm sure that the problem isn't the jack on the CPAP, because the original power supply that comes with the CPAP does not have this problem. It connects reliably and does not heat up.- The cord is not being strained or pulled at an angle or anything. It is long enough so that it reaches the socket comfortably and it's going straight in with no strain on it.- My girlfriend hasn't reported a problem with her cord yet, but I told her to watch out for it, since I had problems with 2 out of the 3 units we bought.Because I consider the flaky cord problem to be a safety issue, potentially life-threatening in some cases, I'm giving this a 1-star review. I'm also now leaving the flaky cord unplugged most of the time, so that I'm using the CPAP power supply directly. I'm only plugging it in when I suspect I will need it, for example, on nights where there is a storm and I suspect we might lose power.I'm going to try to contact the company and see if they can send me better replacement cords.

I recently purchased this product and on my test run it seemed to work fine, the quality of the product also seemed to be good.However, and this could be something I missed in the description but with all the cables and connections it came with for the difference devices it’s compatible with it didn’t come with the cable to charge it once the battery is depleted which was very frustrating. For the price it should come with the connection to recharge it. I ended up purchasing it separately and I am going to keep it, just something I thought would share on here.

I bought this for my Resmad airsense 11. I also bought the adapter kit separately. Works as described. Thanks

This works with Resmed Airsense 10! Other batteries on Amazon (Freedom) claim they do, but they did not work and I had to return them. The cables are clearly marked and the weight and size of the battery are good for traveling. The (Freedom) was much larger and the weight was a lot. Everything fits fine in my resmed bag.