Ultimate Support JS-MS70 JamStands Series Studio Monitor Stands (Pair)

Moving up from a 5.1 to 7.1 setup for my home theater, I realized that I would need pole stands to support my surrounds.I already had a pair of old pole stands that didn't extend very high, and when they did, they were wobbly and the weight caused by the speaker on top shifted forward or backwards.I knew I would have to spend some good money to buy pole stands that were more sturdy.I first considered the Atlantic Satellite 77305018 stands that are an Amazon Best Seller for $30 less.Thing is, I figure you get what you pay for. Those stands didn't look sturdy, and some of the reviews indicated that they would probably not be.So, I went ahead and spent $30 more than I could have and ordered these JSMS70 Speaker Stands.Package arrived within two days with Prime delivery via FedEx.First thing, there are no instructions included in the box. So, really, for the first few minutes I was trying to figure out what to do next.It then seemed pretty apparent to me that all I had to do was use the included socket screwdriver tool to unscrew the long screws at either end of the pole.Using those long screws, you simply screw in the base (with washer) and then the top mounting plate.I had each stand together in about 5 minutes.I extended the pole upwards as far as it would go, securing the last notch with the included pin. The pin is a nice added touch, as it gives me assurance that the pole will never become disconnected.The speakers I was attaching were Atlantic Technology 2400SRs. They are medium size surrounds, weighing in at just under 5lbs. each.I was happy to see that the speakers, at the highest pole position, did not lean or wobble -- that is, as long as you don't bump into it. A slight touch to the pole does make it wobble somewhat, but I don't expect many people to be walking into my side or rear surrounds.The only problem I have is that the mounting plate is too large for the speakers. I know that the company probably wanted the best size plate for any size speaker, but for those that have small to medium sized speakers, the plate will somewhat overwhelm the speaker itself.In all, I am extremely happy with these stands -- so much so I am going to order another pair next month and replace the older wobbly stands I am currently using.

You will NOT find a better pair of stands than this for under $100. I spent some frustrating hours sifting through what seemed like 50+ different stands. Everything I looked at seemed to have one problem or another. Either the platform was too small, or it had design flaws, or it had terrible reviews, etc. Luckily I finally ran into these, and I made the right choice in getting them.-Well built and sturdy. You can tell just by the weight of the box that these will be solid.-Large platforms! Measures 9"x9", enough to fit larger bookshelf speakers. Platforms come with rubber attached to prevent sliding.-Easy to adjust, and you can swivel the platforms any direction you need before tightening them.-Large range of height adjustments. Perfect for setting surround speakers above you, and work equally well for front speakers which require lower heights.-Unbelievably easy to assemble. Even without instructions anyone could figure out how to get these together quickly. I'm not sure if it even came with instructions.-Triangular base design makes placement more flexible.-I am now confident my cat could jump on my surround speakers without knocking them over.CONS-I found the carpet spikes somewhat annoying to work with, but this isn't worth removing a star.

Using the Ultimate Support JS-MS70 to accommodate a pair of Yamaha HS5 Active Studio Monitors in my home office/studio space.The height adjustments are sufficient for a variety of configurations so you place the tweeters at ear level. The base of the units do take up some floor space, but makes it easy to angle the monitors at 60˚.The finish is matte and construction seems solid so long as your not constantly making adjustments. Getting the monitors off the the top of the hutch on my computer desk and angled properly made a noticeable difference in the stereo field - very pleased to be using these.The HS8S is currently off the side of the desk - to the left of the left side Monitor which is not ideal, but serviceable. The size of the base of the JS-MS70 necessitates some distance and separation of the Sub in this space which may be a consideration if you are in a small space.Intalling a wire, under desk cable management solution to lift the AC Switching Powers from my computer peripherals off the floor to make better use of that space and will try to relocate the sub under the desk. Using a foot rest now - for proper posture at my desk - will hopefully keep my feet and legs away from the HS8S.There are no doubt better solutions for a professional environment, but given the price point of my equipment and the compromise of using a home office (third bedroom of a single family home) as a music space I feel comfortable with this solution. And I trust Ultimate Support as a brand given past interactions with their customer support.

Llegaron muy bien empacadas, y sin maltratos. Las piezas y tornillería completas. Son fáciles de armar, con solo dos tornillos por cada base en menos de 10 mins. Son muy estables al ponerlas en el piso y aguantan perfecto el peso de mis bocinas monitor (KRK) de 5". Se puede ajustar la altura sin problemas, controlar la posición para girarlas muy fácil rotando la base y fijando la posición con la perilla que sirve para apretar. Me funcionan perfecto. Ayudan a poder ajustar la posición de "triangulo" en el escritorio para tener una escucha perfecta de los monitores.

Sono di ottima fattura, con piolo di sicurezza nello stelo regolabile e semplicissimi da montare. Perfetti per le mie alesis m520. Se proprio devo trovargli un difetto non sono economicissimi.

I've been looking for a pair of speaker stands for my Q Acoustics 3020 surrounds. I had short listed few and finally decided to buy Ultimate SupportJSMS70 stands. Let me tell you, it's worth every Rupee. Let me put down the pro's and con's of this speaker stand.*************Pro's*************1. Value for money. There are among the cheapest speaker stands that you can buy online.2. Excellent quality. Fit and finish is very good, no scratches and paint work is very good.3. Easy to assemble. I was able to assemble both the stands in less than 10 mins.4. Enough space on the speaker top. My Q Acoustics is around 5.5 kg and it holds very well.5. Good looks. Some of the other stands were awful looking.6. Excellent packaging. Product had a outer as well as inner carton to ensure that stands are safe.7. Finally not a Chinese one, this stand is actually made in US. It's hard to find products made in US now days.*************Con's*************1. Exposed speaker cables, this is the only downside of the stand. Stand has not provided an option to conceal the speaker cable, in fact they have provided hooks on the outside. I wish cable management was better on such a good quality stand.2. Its sturdy for my speakers however I'm not sure if its good for speaker more than 10kg.Overall a very good buy.

J'ai des petites enceintes que j'ai pu surélever ... le son est maintenant plus harmonieux et sans résonance ... et le look reste discret même dans le salon ...Donc satisfait !

These are by far the best speaker stands I've ever used.Super sturdy, solid construction, better than previous wood stands that I've used.Each stand took me about 3-5 minutes to assemble (because I like taking my sweet time with my OCD and examining them in full detail as I assemble them). If you're in a rush, you can put one together in less than two minutes.The main trigger for me was the adjustable height. I needed something that would hold my front speakers at an appropriate height so that the Dolby Atmos speakers on top that fire upwards would actually bounce off the ceiling at the right angle. If you have Atmos- or DTS:X-style upwards-firing speakers, setting them too low doesn't give an accurate soundstage. I'm not pro at this stuff but it seems like a reasonable statement given the angles and my experiences with different speaker heights.The first criteria was how high I could get these stands. The problem I find with most stands is that they don't go high enough for me. I'm 6'4 so when I'm sitting down my ears are still at a pretty decently high level, and I like my speakers to be at ear level or higher.Please rest assured that these stands go SUPER HIGH for a small living room. I thought I would be maxing out the height on these but it turns out that would be way too high lol.The speaker base itself is also great in that it's large, it's square shaped, and it has the soft footings on two ends to keep your speakers in place.Overall, I would recommend these speakers to anyone looking for some sick stands, especially if you want to get the most out of those Atmos-style upwards firing speakers.10/10