Color Enhancer Sealer for All-Natural Stone and Pavers. Marble, Travertine, Limestone, Granite, Slate, Concrete, Grout, Brick, Block. (1 Gallon)

✨️I would totally purchase this product again. Product, sealant, worked as advertised! First I gently dusted the 1900s brick, applied mild, mild light application of an all natural cleaning solution to gently lift built up oils, but not saturate with a squeezed sponge. Followed all instructions and used the entire quart. I poured out modest amounts on a small hand held bowl then applied with a 3" painters brush, super soft! Color bloomed over dry time and clean up was a breeze! Used the whole quart for an average size fireplace with 3 bricked sides, top mantle brick and lower loading ledge brick, traditional construction. Quart size easiest to handle and I dabbed the excess off brush before each repeat brush application. This is old brick, not of the highest quality, but the sealant enriched the golds, tans, reds to rich terracottas in varying hues. I did not get the soft sheen, but I did not expect to with my brick at a fragile state: rough in many areas, etc... The improved color, depth and likely improved integrity is great to see, oh and super easy to apply✨️

This amazing little product took my tiles, and I just installed on my backsplash in my kitchen from looking like a very chalky pale color to bringing out its natural array of Earth tones and took the chalkiness away. I only had a very small area to do so. I just brought bought the small sample size It worked fantastically, and it was exactly the amount that I needed. In the photo, the small piece of tile in the front is a extra piece i had left over that has not been sealed.You can see that its color is a lot paler than the color of the tile around it. The directions were easy to read and basically I painted the sealer on I did two coats.And the little bottle that I bought was perfect for covering the thirteen square feet that I had. I have just completed the backsplash, so I cannot say long term.How things will go?But for the time being, everything looks amazing.And I am very happy I believe this product needs to be reapplied occasionally.So I will end up buying the larger one in the future, but for the time being.This was what I needed, and it was perfect.Great value great product!

I bought this a year ago and wish I had found this stuff earlier. It’s so easy and still working. I have old pavers that sit in shade all day under a drip edge, so they were seasonally covered in black slime and moss. Every year… I did an intense cleaning of these old and really porous pavers. BUT LAST YEAR, I put this sealer in a simple hand sprayer and fixed the problem! I first did a nice light coating on clean dry pavers. I let that soak in and did a second coat with more confidence. and a third follow up spot treatment on the most porous areas. The black slime areas are gone, water is still beading on the surface AND this is water based easy cleanup.

So far so good, my Sandstone tile looks 100% better. It was so bleached out it didn't show any variances and now it's beautiful. The reason I didn't give it five stars is that I know I'm going to have to use a lot and it's going to be very very expensive. I wish they sold a 5 gallon bucket. I am going to wait until next fall to do the entire patio because I want to make sure it holds up to the Heat and Sunshine of the California desert

Applying the product to our stamped, color conrete walkway, we're disappointed to discover that the sealer only offered marginal improvement. We spent fair a bit of time in preparation: - Step 1: Hand on knee, chiseled off weeds, dirt between gaps - Step 2: Hand on knee, brick by brick, brushed the dirt off the path way with a 12" brush - Step 3: Washed the path way with a garden hose - Step 4: Scrub the path way with soap using 7" brush - Step 5: Washed the path way again with a garden hose. My wife commented that the path way is cleaner than our kitchen floor. True. LOL. I took some pictures to track our progress to present to viewers, hoping they might be helpful in answering your questions - just as I was prior to the purchase. Pic 1: I put the first coat on up to the container. Hence the bottom is the unapplied section of our pathway. Pic 2: the close up look of Pic 1 Pic 3: I took this picture 3 hours later after the first coat. The improvement over our original path way looks rather marginal. I added the 2nd coat and but didn't have time to finish it before I had to leave. Pic 4: I took this pic the next day before completing the 2nd coat. Can you tell which section that requires the 2nd coat? Perhaps not. FYI: it's the last section is near the drive way. Pic 5: After 2nd coat, I added the 3rd coat to the section near the top to use up the sealer. You can see the lighter patch where I ran out sealer. This pic was taken right after the completion hence the wet look and deep color. Pic 6: I took this pic 6 hours later but the path way was still not dried. In the areas that were dried (see the top of the pic), the color became duller, and the path way looked more like when we started. Conclusion: Not sure if we expected too much but we felt this product only merits 2 stars. The fact that it provided little else (e.g. UV. protection, etc..) added to our disappointment. I suspected our path way would look better with 4 coats and would have tried that but we already ran out of the sealer. UPDATE: Pleased to report that, after two days, the path way looks better where 3 coats were applied (Pic 7, 8). Hence, we now gave it to 3 stars. Why not more? To really achieve the result we wanted, it'd likely take 4 coats and that's getting too expensive. UPDATE: September 1. All the shine and enhancer are now gone. My walkway is looking almost the same as before the product was put on. What a waste of money and time. I do not recommend this for outdoor use. Should have taken heed of the advices given by other reviewers.

It really works on my stone floor and it last more than several months

had some dark blue concrete/ cement tiles put in the bathroom which started to go white and stained despite cleaning them regularly. in fact some of the cleaning products made it worse. i needed a product that would darken them back up as well as protect them. Easy to use and has done a brilliant job tiles are looking like when they were first laid. Very pleased with the result. Before and after pictures.

Looking to Re-New an older slate tile floor from everyday foot traffic. Black Diamond Stonework's Color Enhancer truly does make natural stone colors "Pop" giving that new floor look again. Easy to use product application & plan on using their floor wash product as maintenance . Will see how floors hold up for durability, but very happy with how they look Re-Newed with beautiful color again.

Works very well and so easy to use. I just put a sprayer nozle in the bottle. Sprayed the entire wall. Left it 10mins then went over it with a towel. You can put another coat on immediately. You don't have to wait which is great.

I was tempted to return this item but decided it was (just) worth the cost. I used it on slate which when washed and still wet was a beautiful orange and blue, this product doesn't bring out as much of the blue as I'd like but the orange is stunning and it seals against general dust and muck. I also used some large stone pieces for my raised flower bed borders, again when wet, were beautiful pinks, blues and greens, sadly this was not as effective on the rough surfaces and just darkened the stones rather than drawing out the colours. A hint for any user, avoid getting it on concrete. I tried to draw out the colours on two gateway pillars we'd built out of off-cut granite and limestone (in that rugged country style) and it makes the concrete stand out over the stone which was the opposite of what I wanted.