B-Land Upgrade Phone Holder for Bed, Neck Phone Holder Gooseneck Cell Phone Holders, Universal Mobile Phone Stand with Remote for Taking Videos & Group Photos (Black)

Love this product! I don’t have to hold my iPhone when reading or typing. It has really helped with my wrist and finger pain. I have bought multiple others as gifts.

After injuring my thumb, I purchased 3 different phone holders to use in different parts of my home. I have summarized my comparisons here. B-Land Upgrade Phone Holder (ASIN# B07SJZT7Q7) - This phone holder is excellent and very well made. It does not have a clamp, but instead has a long “wire” that is very thick and durable, which is bent into shape to hold your phone. It can hold the phone on a hard surface, around your neck, around your steering wheel, etc. This holder can hold your phone either vertically or horizontally (the part that holds the phone rotates 90 degrees at a time). When touching your phone (to type, etc), this holder does not shake or vibrate at all. The wire is very strong and doesn’t move by touch, but the wire is however, very flexible and easy to bend to any shape. This holder can feel heavy a while after wearing it around your neck, but it is fairly comfortable, as the wire has a rubber-like coating over it and it does not press hard against your breastbone.. This holder is longer than the other holder made by B-Land. The part where this holder holds the phone is on a spring that you pull open. It takes more work to get your phone in and out than the clamp-on holder I tried. I have not used the remote that is included with this holder. This holder is exceptional in many ways, and it is my first choice of phone holder out of the 3 that I tried. B-Land Cell Phone Holder (ASIN# B06XP29B2S) - This phone holder is very good and well made. It does not have a clamp, but instead has a long “wire” that is very thick and durable, which is bent into shape to hold your phone. It can hold the phone on a hard surface, around your neck, around your steering wheel, etc. This holder can hold your phone either vertically or horizontally (the part that holds the phone rotates 90 degrees at a time). When touching your phone (to type, etc), this holder does not shake or vibrate at all. The wire is very strong and doesn’t move by touch, but the wire is however, very flexible and easy to bend to any shape. This holder can feel heavy a while after wearing it around your neck, and the metal wire can press against your breastbone and be uncomfortable (it has no coating on it, other than paint). This holder is shorter than the other holder made by B-Land. The part where this holder holds the phone is on a spring that you pull open. It takes more work to get your phone in and out than the clamp-on holder I tried. This phone holder is my second choice of the 3 holders I tried. Lamicall Clamp-On Phone Holder (ASIN# B07PLF1KMB) – This phone holder is meant to clamp on a shelf, table, etc. The holder is well made and sturdy, but it shakes a lot when touching the phone screen (to text, etc). Therefore, I have to hold the wire with my other hand to steady it, which defeats the purpose of the holder. The mechanism on this holder that holds your phone in, is like a large jaw clasp that you squeeze to open. It holds the phone easily and takes very little effort to take your phone in and out of this holder. Additionally, this holder allows you to turn the phone 360 degrees (this is especially helpful for video recording or taking pictures at an exact angle). This holder is my third choice of the 3 that I tried. But, if you need a clamp-on holder, I do recommend this holder as it is well made. Please mark if you find my review helpful. Thank you so much!

Just got this last night. I have arthritis in my neck, and during flare-ups I need to take care to not look down a lot and not hold my phone much. This works really well. Easy to assemble, phone attaches easily and stays in place. The metal stand itself is easily readjusted higher or lower and sits securely on a table or on a bed. A little wary about the durability of the phone holder- it’s plastic and seems like it might not be built to last, so I’ll be especially careful with it.

B-Land NAILED IT with this one!!! I ABSOLUTELY LOVE LOVE LOVE this product!!! My new BFF! LOL :D It’s the first gadget that TOTALLY works in my car for hands-free phone safety. (See photos.) I fold in half, twist twice, wedge it between my seat and center station (that the gear shift is in), and lean the holder against my dashboard and I am good to go with a steady view at a non-glare viewable level!!! VERY SECURE! One-hand insert and removal is SO CONVENIENT! I now have two flex-bars because I bought one with the iPad holder too, so I just remove the holder and leave the bar wedged in my car and use my other bar indoors. The variety of contortions this flex-bar allows is unlimited! It is TOTALLY versatile! Plus—TOTALLY worth the price!!! I am a shopper/delivery professional and use this constantly. It makes my shop trips so easy. I did have to buy a new one for my iPhone just after the return date expired—because the spring broke in the phone holder, but to be honest, it was probably my fault for not being more careful because it is very well-made. But I feel it’s even worth it to have to get a new one because now I have an extra flex-bar. FYI—the flex-bar is a generous length.

This is a great tool. Bought if for an airplane trip as we usually sit behind first class and you don't have access to the trays as easily. But I use it at home more for various needs. We used it for the boys speech class where they had to do a step-by-step video. Pros: Flexible, Sturdy, easy to wrap up and put away, easy to use, the remote is a great feature Cons: Heavy (pro is its sturdy can't have sturdy without weightiness-I know but pointing it out for those who may not want something kind of heavy), Bulky, Looks odd in public (but I used it on the plane - who cares)

So this thing is great in theory but falls short in execution...so close, but not quite there. This is my second one of these, as the first one lasted about a month, and then I HEAVILY modded and fixed that one to deal with the shortcomings, but this one I am starting out with preemptive mods as shown in my pics and some not shown. GOOD: Best option for quick orientation switching...so scolling on Insta or Reddit, and then to see a wide screen video in the app, you can quickly just twist the phone and it locks at 90 degree intervals. Most other options have more of a two hand fumbly thing where you loosen a nut, turn the phone and re-tighten it which is not really very useful for real world use cases. Works with most phones even in cases (iphone 11 max, etc). My wife has that with a popsocket case (built-in) and it holds it fine. BAD: So the metal braided piece in my picture keeps the arms in the proper position for the magnets to hold them in the plastic holder, otherwise the strain on the plastic holes that the gooseneck snaps into will snap right off very quickly with real world usage. You can also see the steel zip ties I have cinched around those very holes to help deal with the strain. What you can't see is that the gooseneck part isn't really rigid enough to hold a modern phone of ~8oz including case. I would almost prefer this plastic (though fragile) phone holder with the aluminum rod/tube based options that don't have the ribbed gooseneck, since they hopefully require more force to change the shape. What I have done to fix this, as you can see in the second picture is to inset some additional somewhat rigid wires into a helpful hole in the tip if the gooseneck magnet. These wires were from hanging fern pots (hook with 3-4 steel wires attached) originally, and I cut them off with around a foot and slid them down in the hole to add some additional rigidity. Finally, the design of the spring-loaded portion of the holder leaves a lot to be desired. the plastic piece is woefully inadequate, and is gutted to make room for a rubbery pad for traction, leaving the plastic that is forcing the phone in place too thin, especially given that it acts as a lever when pushing the phone in and out of the case...this could easily be fixed with slightly think plastic. Mine broke with a month on the first one...so far so good on this one, and my phone is a little narrower now, and maybe the spring isn't quite as strong on this one (whether that is a deliberate design change to reduce the force required to insert the phone or not). Previously on my original one, I ended up having to use a rivet to attach a new piece of plastic which lasted the rest of a year. You will be tempted to put this on a surface with the phone still attached, but please be aware that this is really unbalanced and will tend to fall over if not perfectly stable, and when it does fall over, besides worrying about damage to your phone, the forces applied tend to be the ones that cause this thing to break. That said, if you read or use your phone a lot, and you have wrist/grip strength/hand tiredness because of it, this is currently your best option. I would pay $50 for a serious one that addressed all of these concerns though.

I’m used to goose neck phone holders but for whatever reason, mine never last. I’ve gone through two of them within a year’s time. I was all set to buy a third until I saw this. I LOVE THIS PHONE HOLDER. It’s so much more versatile than the goose neck phone holders. It’s also more flexible. It’s not the same material of the goose neck phone holders. It uses the same kind of flex design they use for bendable microphone stands. I can wrap it around my waist. I can hold it on my shoulders around my neck. I even wrapped it around a tripod when the phone attachment on my tripod was too small for my phone. The spring extension on this phone holder extends far enough to make it wide enough to fit my iPhone XS Max wit no problem. I tried the magnetic version of this one before trying this one and the magnet wasn’t strong enough, so I bought this as well.

Awesome product. Works great for enabling me to do hands free video calls as I move around the kitchen and house, or to do simultaneous movie watch parties with remote friends and family (with the phone recording me, and the movie on another device)—it actually feels like we’re in the same room together. I also use it as a video recorder stand to read to my kids remotely; I flip the holder around and point the camera at the table as I hold a book or Highlights magazine underneath the camera. It’d be great if the company would offer a model with an extra 8”-12” of length in the gooseneck, as it’d enable the phone to sit completely level with my face instead of slightly below it and provide a little more height in stand mode for reading. The gooseneck is very comfortable to my neck and collarbones, but it is not quite stiff enough to enable me to walk normally with it around my neck—the phone continually falls lower & lower due to the weight of the phone and impulse forces from my steps, so I either have to adjust it or try to step more gently and with more grace. There’s absolutely no way you could use this while jogging as it’d quickly get out of place, but the reality is that no device would work for that purpose as it would require crazy image stabilization from the phone. As to build quality, the plastic spring loaded clip does a great job, but I constantly feel like any time I disconnect the phone holder and reattach it, that I’m going to break the holder at the magnetic attach point. I also love the mechanical detents that allow me to quickly rotate between landscape and portrait mode, though it seems like the detents are either wearing down a little bit, or I’ve not got the cable quite symmetric on both sides as it appears to not quite hold the phone level sometimes after I rotate the phone. While there’s room to improve this product, it has worked great for the use cases I have, and I’d definitely purchase it again as it has enabled many hands free activities and saved me time.