Fits Infinity cabinet and driver models: Infinity 902-0032, 902-2673, 902-2864, 902-3061, 902-3067, 902-4208, 902-4292S, 902-4599, 902-4699, 902-5320, 902-5861, 902-6693, 902-6716, 902-6779, CS-3008, CS3008, CS-3009, CS3009, EL-30, EL30, ES-103, ES103, ES-300, ES300, Infinitesimal IV Subwoofer, Kappa 6, Kappa 7.1, QA, QB, REF 5, Reference Five, Reference Six, Renaissance 90 Series, RS10 Subwoofer, RS-5000, RS5000, RS-5B, RS5B, RS-6 Kappa, RS6 Kappa, RS-6000, RS6000, RS-6000A, RS-6000A, RS-8, RS8, SM-10, SM10, (71985, SM-10-1), SM 10GCF, SM-100, SM100, SM-102, SM102, SM-105, SM105, SM-112, SM112, SM-115, SM115, SM-102, SM102, SM-215, SM215, SSW-10, SSW10, SSW-210, SSW210, 71985, 71985, 72664, and many more! Please check the model and size of your speakers before ordering to be sure you receive the correct foam edge repair kit.
E**N
Old Glue
I have used Simply Speakers surrounds before without issue but not this time. This is the third time I've refoamed speakers, so no big deal, right? The last time doing this was probably 10 years ago, so I didn't remember the consistency of the glue. As I started to squeeze the glue tube it was very thick and hard to come out. I squeezed a bit more and about 20% of the tube squirted out and got all over the speaker and our dining table. What a freaking mess! The speakers will function alright but I will never be able to sell them as it looks like a 5 year old did the work and our beautiful dining table took over an hour to clean and is still not perfect. Beware, if the glue does not flow at first squeeze away from your project. Not happy at all!
R**N
Works great
Just be careful and follow the instructions. Make sure come is centered. Makes old speakers like new
J**V
No problems. Worked like a charm. My 1986 speakers work like new again!
I had no issues with the foam repair kit. I used lacquer thinner to get the old foam off the speakers, which was very effective, and the new adhesive and instructions that came with the kit worked fine.Some kits describe the need to remove the voice coil dust cover and use shims to accurately center the driver so that it doesn't scrape on the voice coil (which would clearly be bad). This kit didn't describe any such steps, but rather had you center the speaker over the voice coil by feel. The adhesive takes a few minutes to set up, so there's ample time to work the driver up and down while it is curing, and to ensure that it's properly centered. It worked fine for me.
J**T
Was easy
I was intimidated because I had never repaired a speaker before. I was online looking for a speaker replacement and came across these and decided to try it. It was easy and the sound was great. I am officially a speaker technician
A**R
Made my old speakers just like new and was easy to do.
My old infinity speakers surround deteriorated and my speakers sounded terrible. After much consideration I ordered the simply speaker kit and watched their online instructions and it was easy! Definitely the help videos are a must watch to make the process successful and easy. It really is as easy as it looks. And now my speakers are as good as new!
S**R
Works - use wood chisel or equivalent to make prepping easier
I found the process a bit messy since I'm not patient gluing things. It is messiest though scraping off the old glue. I used rubbing alcohol and a wood chisel (as was recommended). It does gum up the wood chisel so if you are fussy about that use a cheap one. It really made it easy to get the old glue off by using the chisel. The glue has toluene and hexane so do use it in a ventilated area as advised. My Infinity Reference 6 speakers bass now sounds good again. I notice that the other smaller speakers are starting to develop holes in the foam (sigh) so I'll be ordering the next size kit soon...
R**.
Good Product!
P)retty good product. I purchase for 30 year old Infinity Speakers and I wouldn't say they sound "brand new" but still hold a pretty good sound. You have to be careful when installing, there is a fine line between stretched too tight and not tight enough to ensure the best sound. I would recommend.
V**O
Pretty difficult to do but when you complete it your ...
Re-foamed Infinity Kappa 6 (10 inch woofers). Pretty difficult to do but when you complete it your speakers are as good as new. I deviated from the directions and applied a dab of glue every 90 degrees. Then after I was sure the cone was centered, I worked the glue all the way around, lifting the foam with a pencil tip as I went. Otherwise if you attempt it in one shot and you're off center, you're screwed.
Trustpilot
2 weeks ago
2 weeks ago