Alla Lighting FL-BH-HL H8 H9 H11 LED Forward Lighting Bulbs, Fog Lights Bulbs, 6000K~6500K Xenon White, 12500lms 700% Brighter Xtreme Super Bright LED Lights Lamps Replacement

Needed new lights to see on unlit dark & country roads. These were great! Actually such a bright & clear white light, some drivers find the need to flash their high beams at me. But realize their error when my high beams are applied & they squint for that split second. Deer, coyote, fox, bobcat, opossum, raccoon… all the animal kingdom scurry before it’s too late. Which is a nice change of pace from clobbering something on the road.Fairly easy to install. Once you remove your car/truck lighting housing, it really is plug & play.**2 years & 2 months after purchase, one started failing; flashing on & off. Plan to use this second purchase replace the flickering/flashing unit & keeping the other as a spare.

So far they are doing great, I've got them in 2 of 3 vehicles, 3rd set is in the shop waiting to be put in. Time will tell.

This is the only brand of LED headlights I buy. Great customer service and a great product. These headlights are the brightest ones I could find and they last a long time under normal driving. I don't recommend keeping them on during the day as you do not need them. That will shorten the life of the headlights of course. But I have not any issues with them burning out quickly and if they do they don't give you any issues you have like a year to get them replaced so it's never a hassle at all.

I tried a few bulbs in the $40 price range, these are brighter and have a better beam pattern than any of them. The brightness is almost too much, my old Philips Vision halogens look like candles compared to them. The high beams are also very good, not quite "turn night into day" but probably as good as you're going to get in an H4 housing. Beam pattern is near-perfect in my Camry with a crisp cutoff that required no re-aiming. Reflectors do tend to scatter a small amount of light above the cutoff for illuminating road signs and stuff, and since these bulbs are so much brighter that scattered light is also a lot brighter. I was a bit worried about that at first but after a month of driving nobody has flashed me. I definitely wouldn't consider going any brighter than these though. Do make sure your lenses are crystal clear before throwing these bulbs in, cloudy lenses are just going to scatter more light and with bulbs this bright that's downright dangerous. I used a 3M headlight restoration kit on mine.Build quality is nice. The backing plate is anodized aluminum instead of stamped steel, the clocking adjustment has a nice indexed feel and is very secure. Since the backing plates are removable the bulbs are very easy to install, just install the backing plate first, then the rubber boot, then the bulbs themselves.Bulbfacts lists these headlights at 5350k color temperature, that's one of the reasons I got them and I'd say that's dead on. They're pure white with no blue tint at all. I really don't understand why they don't list a more accurate color temperature for these lights. I know 6000k/6500k brings in clicks from the people looking for cheap LED's but most people looking to shell out $80 for a set are probably shopping for a pure-white color temperature anyway. It sure would make it easier to find decent bulbs if these sellers actually listed accurate color temperatures.A few complaints though:These things get HOT. The heat sink is very hot to the touch within a minute of them being turned on. I'm worried that may impact longevity, but we'll see.They are not "DOT" approved despite what the fancy rendering shows. It's a blatant lie. In fact there is NO halogen-to-LED retrofit bulb you can buy that is road legal in the US. They're all illegal, and if you're in a state that does inspections you'll need to keep a set of halogens to swap in before your inspection. This is actually pretty unfortunate, since it allows the market to be flooded with cheap, blue LED's with horrific beam patters and made-up lumen ratings that do more to blind oncoming traffic and give LED's a bad rep than they do to actually help you see. Since there's no DOT approval for any LED's we can't look to them to tell us which ones are actually any good, and the people that do care about color temperature and oncoming traffic have to rely on sites like Bulbfacts and trial and error to find good lights.The red anodizing is visible in the reflectors at certain angles, and can sometimes make your car look like it has red eyes when the lights are off. This is really the biggest flaw with these lights because they could have just anodized them clear, but for some reason they chose red. I don't get it. I would try to sand off the anodizing myself, but with how hot they get I'd much rather keep my warranty intact.

So far Amazing lights. We will see how long they last.

This is the second time I have purchased these LED bulbs since I couldn't find anything brighter in this price range. One LED started flickering out after 2 years of nighttime driving and needed to be replaced immediately. My vehicle uses a H7 socket and these LEDs would not fit without purchasing a separate adapter for an H7. Of course, when I got it I had to chamfer the inside diameter of the adapter in order to twist and correctly align the LED bulb into place. I also needed to use a little high temperature epoxy so the metallic mounting plate wouldn't wiggle around in the plastic adapter. Once I got this contraption to hold securely onto my projector headlamp the light output was extremely bright and well dispersed with a sharp cutoff, and very close to the actual color of daylight. These Mini FL-BH 90W LEDs can throw several thousand lumens about 75-100 feet down the road especially with projectors. I never had any eye strain or fatigue when driving long distances at night.In conclusion, getting the H7 LED to fit in my projector housing definitely was a custom fit. I wish Alla Lighting would do a better job in getting H7 LEDs to fit into more vehicles, or at least include a metal adapter in the box. Their H8 H11 H13 (my fog lamps) size bulbs seem to be more standardized and can fit without any modification in many vehicles. My vehicle actually uses the 9005 for the high beams and there were absolutely no issues with fitment. I would definitely recommend them, but not in the H7 size.

These LEDs are a game changer coming from the OEM halogens! Keeping our kids safe when they're driving down the country roads at night ( lots of deer, hogs, and the occasional escape artist cow🐄 and horse 🐎) Man it lights up like it should. I would recommend this product.

they are last me about 200k miles of daily use and i use them hrs on end every day my truck do to how the headlight housing is designed nothing allowed me to see more then 30ft but these let’s me see just as far as these newer cars or aftermarket headlights. i also have a set on my newer truck but that thing people think i have my high beams on if you want a sun in front of your car/truck/semi/off road rig these are the bulbs for you

These work great for lighting up the trials very bright.

Update Dec 2022. Had the darkest- rainiest- 240 KM drive last night ever. After I could pass traffic and get the high beams on. F*** These lights are so Awesome!!!!!! Aim them properly and you will be fine!At 12,500 Lumens- if you get stopped for not lowering your high beams- the police will know right away the lights are aftermarket (red housing).Very bright, way brighter than the expensive KC halogen light kit. I installed in KC housings I already had. Far better then stock and exceptionally brighter then KC halogens. I wish the housing to be a regular chrome, silver or grey colour.

These are very high quality lamps with one annoying issue. The instructions didn't tell me these were polarity sensitive lamps. I plugged one in correctly by chance and the other backwards leading to two weeks of frustration getting an un-necessary replacement lamp shipped out before vendor told me about polarity issue. One simple sentence and diagram would have avoided this issue. I have included the hard to see polarity markings on the headlamp socket so others can avoid this grief. In a typical darkly lit garage you will never see these markings and there is no mention of them in the instructions or by the vendor until a lot of back and forth emails took place. Update, one bulb has failed after only two years and six months, so I guess there are some quality issues as well :-(

Fit perfectly for my 2017 RAM sport (projector) and they are great bright. Was no headlight adjustment needed. Only make sure they are in the correctly position ‐ a common mistake and than the guys complain about the LED's

These lights are great! They have an excellent, clean beam pattern and are extremely bright. They seem to be built pretty solid as well. I absolutely recommend these.Only downside was adjusting the beam. The Allen key they sent me was too big for the screw, but luckily I had a smaller one in my toolbox. You also have to be very careful tightening the screw once the bulb is adjusted, it presses against plastic to hold tight so it will strip/slip very easily.If these had the adjustment ring on the outside like their h13 bulbs they would be an easy 5 stars.