Ezzy Auto Beige Left Driver Side Sun Visor fit for Camry with Sunroof and Light 2007 2008 2009 2010 2011

The Ezzy Sun Visors arrived quickly and exactly as described. They were a perfect color match and fit for the beige interior of my 2007 Toyota Camry Hybrid. They come pre-wired for headliner vanity lights which work perfectly when operating the slides to the vanity mirrors. Installation did not take long. Be careful when prying off the old mount and don't lose any clips behind the window trim.

Replacement works perfectly and was easy to install

Perfect fit and color match to my 2010 Camry SE with sunroof. Removing the old floppy sun visor was the 90% of the work but there are plenty of yt videos on how to do so. All the plastic bits are being replaced so I wasn't afraid to be more aggressive prying it off. The original metal clips stayed on so don't forget to remove them before installation. New part snaps in and then the oval cover snaps on top. Easy. Visor stays in the desired angle although feels a bit tight so I'll be watching to make sure it doesn't suffer the same fate as the original part. Slide cover also works as expected to turn on the light when opened.

Desperately needed to replace my driver’s side visor. The thing wouldn’t go back up. My husband installed it this one for me and it fit perfectly! Did not take him too long to install.

Fits perfect in 2010 camry xle. Took less than a minute to install. Smells like fish or pee when you first take it out of the package. Grey color matches the interior. Feels sturdy, hopefully it lasts.

The product is really solid, BUT, know these things before you begin working to replace the visors.1. The clips that come with the new visors are weaker than the originals the car came with. Because of this, I used the old ones and just opened the clips before putting them on the new visor. Opening the clips (as shown in the image) made them stronger so the visor doesn't wiggle around. You will need to use your flat head screwdriver to fit the clip into the visor. You'll notice when the clips are in the visor, they are a lot more stable, stronger, and don't wiggle around in it's hole.2. Also, the rod inside the visor is VERY tight out of the box so you will have to man-handle it a little to get it mobile so you can open and close the visor once it's fully installed.3. Make sure you wear disposable gloves because it is slightly dirty/rusty and the clips DO hurt your fingers a bit, even with using a flat head screwdriver.4. When you get to the point where you just need to put the cap on at the end, use the flat head screwdriver to open up the hole in between the clips. This way the 2 square bits on the cap that attach inside the clips actually go in.Total installation time took about 1 hour because we didn't know what we didn't know. Knowing what we know now, it could have taken us less than 8-10 minutes for BOTH left and right visors combined. About 3-4 minutes each visor.Overall, we're happy with the new visors and they open and close perfectly now. Also, the lights work too when you open the slider for the mirror!!!The only thing I noticed was that the fabric color was slightly off between the left and right visor. It's not very noticeable, but wanted to mention that for anyone who want's a perfect color match between the left and right visors. Ours came in slightly different in color, but I don't mind.5/5 for me overall. Happy with the results. I hope this review helps!

Worked amazing for me and easy to instal

Exactly what we needed for a great price