Door Hinge Pin and Bushing Repair Kits for 1999-up GMC Sierra Silverado Chevy Truck SUV

I use this on a 1995 C1500 worked great to fix driver and passanger door sag , it was pretty easy to replace with some YouTube videos , now my doors open and close with ease , only part that was a little tough to replace was the roller but every thing else was easy , great product for the price

The pins are perfect. Although my doors on my 1994 Chevy C3500 did not use bushings in the lower for some reasonNow, let me advise you this detention pin does NOT fit without some modification! I found this out through reviews and YouTube.You need to grind some off the big area at the bottom. I did it with a bench grinder. Kept it uniform and kept trying it. You only want to take off enough for the small end to go through enough for you to put the e clip on. Don't do like me and go grind crazy. I ruined one and had to order another.Also note tjay it does not go all the way in at the bottom. If you do this the arm that is supposed to ride on the roller will not be lined up with the roller.Now, keep up with this spring tool. You WILL need it. I couldn't find mine when I was installing the springs. I worked for well over an hour trying everything and nothing worked. I found the tool and each side took about 5 minutes with this tool.Loose the nut on the tool almost to the end of its thread. Insert the spring. Tighten in down to compress the spring. Always keep the spring pointed away from you. It holds it well but never trust a spring.Once you get it tighten slide it up to the spot where it goes and once it's in place loosen the nut until the spring is where it needs to be. Then yank the tool out.I recommend using a gear wrench for this. It makes it easier.Good luck with your project. Hope this helps.

It’ll do the job. Fit was good, I know I will need to do this again in the future, and will try for a higher quality of materials. Specifically the bushings. These looked like a softer material than OEM. But they installed easily, work well, and were a good price. No real complaints.

Replacing these was quick...once the old ones are out, these go in easy and everything lines up perfect!GrinderHammerSmall steel punchScrewdriver13 and 14mm wrenchA way to suspend the door

Usually these type of bushings like the crack and break away. So far, these are Holding upFine

They work well and fit nice door shuts like new !! Fast shipping

These worked perfectly!

The quality honestly seems better than the doorman, their use a crappier catch for the hinge pins but the hinge pin grommets are very durable. The spring compressor is obviously very cheap but it functions well enough to get the job done. The main problem with this kit are the two roller pins. They are not the correct diameter. I had to use a drill to wallow out the holes just so I could beat them into place. Yes I know you have to BEAT them into place but they were plain old too big to fit out of the package. Typical problems with modern parts, SSDD