Lamicall Gooseneck Phone Holder for Bed - Cell Phone Mount Clamp Clip, Flexible Long Arm, Overhead Mount for Desk Headboard Bedside, for iPhone Air 17 Pro Max, 16 Pro Max, 15, 14 & 4-7" Phone

Super sturdy, holds my phone very well, definitely worth it.

Works great. Easy to use. Quality is quite nice. Especially like the clamping clip. Only thing I would like is for it to be a little bit longer. But that's a personal preference not a design flaw. Smacked it accidentally while moving while phone was being held and it never drops and does very little moving. Overall great buy.

I am comparing the SAIJI gooseneck phone holder, 38.6" with "leather" wrapped arm and 360 adjustable clamp clip (black) $15.99 VS the Lamicall Phone Holder Gooseneck Mount (white) $19.99. Overall, I prefer the cheaper Saiji 38.6" with 360 degree adjustable clamp. It is longer and it gives a little more leeway and height for filming things on my table. The "leather" wrapping does feel nicer while maneuvering the gooseneck. The table clamp is easier to tighten and loosen. The 360 degree clamp clip allows for easier movement when trying to get the phone angle just right for recording. The Lamicall Phone Holder Gooseneck Mount in white is slightly more expensive, but not much more. There are design features on the ends of the gooseneck that make the gooseneck less adjustable, almost like a sheath or sleeve that prevents movement. The table vise grip doesn't slide as easily and I have to use my hands to slide it open more, and the twisting mechanism to tighten the table grip isn't as easy to turn as compared to the SAIJI. The phone clamp clip does not rotate 360 like the SAIJI. Also the Lamicall gooseneck cable section is less flexible and also shorter than the SAIJI. The only thing that the Lamicall gooseneck has going for it is the white color. Both are very sturdy and are fairly lightweight although pretty durable and hold their shape really well. The Lamicall Phone Holder Gooseneck Mount is very functional and it would definitely get the job done.

I bought this because I wanted a hands free way to watch shows and video chat from bed without holding my phone. It seemed like a simple solution to neck strain and awkward angles, so I gave this gooseneck mount a try. Setup is straightforward. The clamp base adjusts to fit bed frames or nightstands up to about 2.36 inches wide and a silicone pad keeps surfaces from being scratched. The 85 centimeter bendable arm is long enough to position the phone overhead or within easy reach, and the whole unit holds its position once you set it. I really notice how the phone stays where I want it without needing constant readjustment. What stood out is how stable it feels. The arm is solid thanks to the aluminum magnesium core, and the 360 degree rotation makes switching between portrait and landscape quick. It comfortably fits devices in the 4 to 7 inch range, so my phone fits snugly and stays secure. One minor note is that the arm is not ultra flexible, so you do some planning to get the right angle, but that trade off gives it steadiness. Overall this feels reliable and I would rate it five stars.

I originally ordered only 1 but it just worked so perfectly I had to order another one (the second one was the rose gold which is cute) It's flexible but I'm a very sturdy way which is great because I can clamp my phone in and not have to worry about it tilting, it's overall easy to use. The design is so sleek too that you don't even pay attention to any parts that are plastic (and the plastic is also fairly sturdy as well) it helps me save space on my table (I'm a momma and any fellow mamma will know just how quickly baby items take up space so this majorly helps with that issue)

My intended use is for stable video captures of dog training. I am not sure whether this will work in the long run successfully. IF your intended use is a stationary desk setup / semi permanent placement - to allow you to use, your phone, see incoming messages, calls or watch movies, etc, while working. This device should be Great (5 stars). 1️⃣. I have a iPhone 14 pro max with a hard case attached. The power button on the phone is larger and on the right edge of the phone, two vol buttons on the left edge. ⚠️ First time I clamped to the Mount phone holder - my phone turned off (the power button is in the way for center holding. The second time my phone went to place an emergency SOS call, because the buttons being held down together for more than a few seconds... Need to turn off that phone feature. Need to place my phone in holder further towards the bottom of the phone. 2️⃣. The gooseneck is visible in the camera view. Very Difficult for me to adjust to get it out of view. I was finally able to get it out of view. I will have to juggle this everytime I try to use. 3️⃣. The rigid sturdiness (a plus) of the gooseneck. I doubt this portion will break or wear. You will not be moving it much, because it is not a pliable, easy to adjust feature. Sturdy - absolutely. It will not cause the mounted phone to slip out of position due to this part! 4️⃣. Clamp to hold phone itself. Appears to be lightweight, low cost, cheap plastic - that could easily break if you are not careful. It did easily hold my iphone 14 pro max. It can NOT be rotated. This clamp really needs a ball-head. 5️⃣. Clamp for the Base. Easy to turn handle to open and close the clamp. The sleeve that you turn, may break off - if you intend to move the mount to different tables/desks often. If using only at your desk - and will be stationary - this will work Great. ➡️ Recommend Re-Design: (1) Could definitely use a ball-head feature for the phone holder. That will provide increased and easier flexibility for users, and it will allow the gooseneck to easily be rotated out of view. (2) Swivel at the gooseneck base. Can have a locking lever to lock in place. Unlock - to just swivel the sturdy gooseneck out of the way, when you get up & down. Overall - I will be searching if there is a better option for my 'heavy & large' iPhone for quick, impromptu, sturdy video captures, that can be used almost anywhere. Side NOTE: I do not see this device holding a Pad. I think my phone is the largest device it would comfortably hold.

I’ve had this 5 beautiful years. You can bend the metal portion any which way you want, it almost defies physics. I can’t tell you how many times I have used this for video calls. May she rest in peace, we had a good run. It’s well worth your money UPDATE: I have fixed it. I’m sure I’ll get another 5 good years out of it :)

I was pleasantly surprised at the quality of this phone holder, I have been through many of these phone holders and all of them have sagged over time. This one is very sturdy. With all the conference calls I’m on these days I like that this allows me to set my phone at eye level. I typically use my phone rather than my computer for most of my conference calls. This stand is actually sturdy enough that I can touch the phone and login as necessary without worrying about the stand moving or collapsing as has happened with stands I’ve tried in the past. If you’re like me and you’ve tried many of these, the rigidity is new and does require a bit of muscle. This is a perfect phone if you plan on setting it and leaving it in that position most of the time, or you only occasionally have to change the position. If you are constantly moving your phone up down and around this may not be the stand for you. I also love the way the connection to whatever surface you are putting it on is very adaptable. This was really well designed. The clamp is a rubberized so it is safe for use in fine furniture or glass and can adjust to anything from 0”-4”. Same with the clamp that holds your phone, I have no issues using this on my expensive phone, with or without a case on it.

It doesn’t have all the gizmos and other junk you see prompted on Tiktok ads. This is a quality sturdy product that has few moving parts and no electronic gadgets that could eventually fail. Bring your own lights and shutter trigger and enjoy! The metal bendable arm is pretty stiff (great for stability) but take some work to bend into preferred shape. Good one!

It’s as described. It’s a fairly solid item and holds onto the phone quite well. My only issue is that I find the stem to be rather stiff so making minute adjustments to the position is challenging. The arm will bend to where you want but the tweaking a bit to get it exactly as you want takes some effort.

This is the best cell phone holder I have ever had. It is amazing I don't even have words for it. It works exactly as add vertized. The cable that holds the phone up is absolutely so strong. The clip is so easy to use. The screw part is easy to do on the table. And it goes where you wanted to go. Best product I've ever bought off of Amazon. Thank you

This holder is just ok. I think the price was a bit high for the quality. It is quite shaky when a phone is in the holder (the phone is very snug though, which is good), and the arm is very difficult to move around. I ended up returning this item and getting another product.