Operating voltage: 4.8V~6.0V Operating current: 200mA/60º Operating speed: 0.12sec/60º at 4.8V; 0.10sec/60º at 6V Stall torque: 1.5/1.8 kg.cm 20.8/24.9 oz.in (4.8V/6v) Dead band: 1-2 uSec Gear Material: Metal Connector wire length: 25 cm Connector type: Futaba/JR compatible Single Servo's Package's Weight: 12g / 0.42oz Single Servo's Package's Size: 23x11.5x24mm(0.9 x 0.45 x 0.94inch) Total Package's Size: about 48x11.5x50mm(1.89 x 0.45 x 1.97inch) Scope: Helicopters KT, fluttering, gliding, small robots, and other models Package included: 1 x EMAX ES08MA II Metal Gear Digital Servo
R**L
A very cheap upgrade over stock.
Purchased this to replace the sub-par stock servo in my Axial SCX24 Jeep. Had to use a small file to "open up" the stock servo tray and filed a "notch" in the rear of the tray so the wires exiting the servo were not pinched or bent. Very easy to do. So far I have no complaints at all. It's faster, and definitely stronger than the stock servo.
M**.
Excellent upgrade for SCX24
Received the product earlier than scheduled which is always great! &This is an Absolutely Awesome upgrade for the SCX24, the install was a breeze &really pretty straight foward. I can definitely feel the added torque &the increased handling. That being said it's still a small servo so the increases arnt enormous but definitely enough to feel the improvement. I'd definitely reccoment it. I'm actually buying 1 for my dad &my son cause I just really think everyone should realy have 1 of these in the scx24. That said im obviously buying another &readily recommending it to others.
G**9
Perfect servo upgrade
Much better servo than stock. Way stronger! You have to do a little bit of modification to get it to fit in the servo tray since its slightly bigger. I shaved down the side of the servo with a dremmel. Screw holes don't sit up against the servo there's a gap (2nd pic) i used the supplied longer screws and servo is in there good! I used a piece of phone wire to coil up the extra long servo wire. Overall very happy with purchase already ordered a 2nd one for truck #2
C**G
21 tooth servo horn, try to buy one before you buy
Advertise as a great replacement for scx24, which all use 25 tooth servo horn. All the micro trucks are based on these tiny servo horns. Try finding one to fit this thing, or you just upgraded your truck and are stuck using absolutely garbage white plastic it came with. Returning.
R**.
Powerful and fast servo for the money it cant be beat.
Great performing servo. Added to my scx24 with minimal mods. Plan to add to my fms 6x6 atlas as well. Wpupd given 5 stars but took for evvveerrrrr to arrive to me.
S**N
Slightly larger than oem scx24 still works
It is slightly larger than the scx24 servo it still stick out over servo mount. Still a Nice upgrade metal gears.
R**H
Seized gears on arrival
Gears would not turn when powered, so I took apart the case to see if anything was jamming the gears. I didn’t see anything obvious, so I reassembled and when I was screwing in one of the four screws, the case broke in the area surrounding the screw. The gears started too turn after assembly, but not at first. I’m returning for a refund or replacement.
J**O
Better than stock for scx24 c10
Way better than stock scx24 servo. Much stronger and faster. I did get another servo mont for it though as the stock was to flimsy and small for it. I got the one that came with metal servo tray for a few dollars extra.
Trustpilot
2 weeks ago
3 weeks ago