LORESO Tube Bender, Tubing Bender 0-180 Degrees Pipe Bender - 3 In 1 Copper Bender for 1/4" 5/16" 3/8" Tubing Bending Tools- Manual Tubing Bender for Copper, Brass, Aluminum and Thin Steel Pipes

Easy to use, works as described. Great price.

I needed to put a new fuel line on my Triumph TR6. The tubing was not bent to fit, so I had to bend it myself. Knowing that you can ruin tubing if you try to bend by hand I bought this bender. It performed as needed!

This tool works great if you're using this for its intended purpose. If you try to bend 3/8" stainless steel with a wall thickness of 0.065" you'll snap it into pieces. This is made out of cast aluminum of questionable quality. That being said, if you stick to break lines and tubing that is easier to bend (i.e. copper, copper/nickel, thin stainless) you shouldn't have any problem.Also I picked up the pieces of my broken bender, bolted it to an iron plate, and used a torch to heat the aforementioned stainless tubing orange hot, and it bent very easily. Learn from my mistakes and use heat to your advantage if you want to use this tool for jobs it wasn't built for, it'll save you a ton of money avoiding a $200 tubing bender. Just don't burn yourself.

I used it to make a multitude of bends in a 5/16's copper fuel line for my land cruiser. It worked great.

This one didn't break

Did a brake line on a 66 gto without and problems. Turned out the way I wanted it to.

good copy, wont last.

It helped to replace my car's brake lines (3/16").Works as described.Bigger than I needed. probably the size of the tool is defined mostly by the larger OD tubes, the bending radius is larger than could be for 3/16". and not easy to start working with it.However, the work is done successfully. Happy with this tool.