STONE CITYPrintable Magnetic Sheets Make Refrigerator Photo Magnet Glossy Print Paper 12mil Thickness for Inkjet Printers 8.5x 11 Inches 5 Sheets

Was concerned about my HP ecotank printer being able to pull the sheet through, it's pretty thick of course since magnetic. It hesitated for a secondary but it definitely was able to pull and print. The color isn't too vibrant, but for my purpose, this works great!

Very happy with Stone City (gloss) printable magnet ! I printed on the magnet with an Epson ET 2840 printer using the "Photo" setting. It turned out great! I cut it out with my Sihouette Cameo 4 using the Magnet Paper Printable setting. I made sure I had a new mat and Auto blade. I couldn't be happier.

Easy to use with my inket printer and cricut. Cut easily. Will be buying again!

I use an older model of Brother printer MFC J460DW, and on top of that it's currently using off-brand inkjet ink. At first I had issues with vibrancy, but noticed I also had those issues on normal print paper so I set the printer to a "glossy" setting and my color issues were fixed!My mistake did give me a sheet of -not so great- magnets to experiment on, so I decided to do so!The first picture is of the image printed at the "glossy" setting, the second is a "letter" setting, and the 3rd is one of the "letter" setting magnets after spraying with Rustoleum 2x Clear Matte spray. I absolutely would not recommend using this spray as it faded the (already pretty faded) magnet significantly.My second image is to show the thickness against my printer paper test; These sheets are thin. I printed magnets about 1.5" x 2" and they could hold up a sheet of paper on my fridge, but just one regular sheet. Card paper and photos didn't work, but if you printed a frame it might!My third image is two of the defunct magnets; One I sprayed with Castin' Craft Resin spray, and not only did it protect the image from the back of an old wooden paintbrush, but it also left the color in place and intact. There is visible indents from my scratching, but that's purely because the magnet sheet itself is very thin. On the right is the image printed from my printer and scratched with the back of the same paintbrush with no additional spray coating, and uhhh... Lets just say I see the issue others raised about scratching.Hope this review helped someone! I'm ordering another package.

Good quality, magnets could be stronger

Great quality! Prints look vibrant and adheres great to my refrigerator.

Looks great but the black ink bleeds

Very good quality magnet paper for a good price. I used a super cheap inkjet printer and the paper did not jam at all. The image was clear and the print came out great.