3M Auto High Strength Red Lens Repair Film, 03341, 3.75 in x 7.75 in

So far so good. It’s a great fit for our cracked tail light and it’s much better than the thin red repair tape that is out there. This is a very conforming thin plastic that provides good coverage for repairs. I used the one strip for two of our tail lights this time around. I did pre-clean the taillight with alcohol for better adhesion. I did not cut to the shape of the damage - just kept it square / rectangle shape for the repair. Easier to measure and cut, plus it gives a more clean look on the tail lights. You can barely see the repair patch unless you’re really close to vehicle.

Works great. Did a temporary fix until I can order a replacement for the tail light on my Santa y.

I busted my rear blinker when my tire blew out, so I wanted a quick fix. The tape is nice and thick, and the sticky nature has been pretty good. Just to be sure, I wiped the surrounding plastic lense with rubbing alcohol to make sure it sticks on well. So far it has held up for the past month, although it has peeled up a little on the edges after the first day. Surprisingly the tape hasn't peeled up anymore after that. I like how bright it is too. My blinker is brighter on this side because of the bright yellow of this tape, which is comforting. I also like that it only took one layer to make it a bright and easy fix, so you'll have extra for a few more applications if you're like me and don't want to buy a new blinker for awhile ;)

I’ve been looking for a tape like this for quite a while and it absolutely is exactly what I sought. It’s the right width, flexible, and transparent.

Someone “bumped” me in a parking lot and went away. I had no idea for several days when I happened to notice white light leaking through the red stop light on the driver’s side. My 2018 Corvette Stingray had never had so much as a scratch and I was very annoyed! I checked the price for a new stop light lens and they were $400 each! The chip was a small triangle at the bottom right side of the lens, I cut the patch to cover the sides of the break by a half inch and pressed in place. It’s been several weeks now, the chip doesn’t show at all and I have to look closely to spot it myself. I suspect that I’ll eventually bite the bullet and buy the OEM replacement, but the little patch is doing a great job! The kit contains clear, orange, and red lens material more than enough to cover most chips. The lens material is thick enough to be strong, thin enough to sculpt to curves and comes with a strong adhesive painted on the inside of the lens, cut your shape, peal the tape off and stick the patch on. I highly recommend this product!

I repaired a broken brakelight lens with this stuff. Here are my impressions: -- WHAT SIDE IS THE FILM ON: Its difficult to determine what side the removable film is on. They should put labels on it so it's easy to see. -- DONT CUT TO SHAPE OF BREAK!: The instructions state to cut out the film in the shape of the break with a 1/2" overlap. This is a mistake. It's better to leave the film rectangular as it will then better blend with the other lines of the brake light. -- NO CLEANER PROVIDED: The instructions specify a 3M pre-treat on the lens, but nothing is provided in the kit. Not even a tiny little dropper, which is all that is needed. -- TRACE ON WRONG SIDE: The instruction states to trace the broken section on the 3M material. If you happen to trace it on the film size, since it's impossible to tell, you will trace it backward,s and it won't cover the break properly -- COLOR MATCHES: The material color is a good match for the brakelight lens. -- USE ALCOHOL TO CLEAN: Since the kit is not provided with the specified fancy 3M cleaner, I used alcohol to clean the lens before applying the 3M material. That seemed to work fine. -- ADHERES WELL: The 3M film adheres well to the brake light lens. Time will tell if it prevents wanter infiltrating. -- AGRRESSIVE TACK: The adhesive is very aggressive, but with a small area of an edge attached, I was able to pull it off to reposition, and the area that contacted seemed to still adhere when I reapplied it. CONCLUSION: Good Adhesion and Color, No Cleaner Provided, Its a Mistake to Cut to the Shape of Break

This is easy to apply and really stays on. I had a fix-it ticket for a broken tail light and it was going to cost a ton to replace the light. I applied this, following the directions, which only took a few minutes. The police signed off on the ticket, mentioning they had never seen this before but that it satisfied the requirements for the repair. The film is waterproof and has stayed on perfectly for several years!

Adhesive is very good. I applied the tape to my right rear tail light last October and it's still in place after a South Dakota winter. The red color faded to clear, so I had to re-apply this spring. Considering the vehicle is parked outside, that's probably to be expected.