XSPC Radiator Gasket, 280mm, 2-Pack

I bought these radiator gaskets for my H115 Pro. Peel off adhesive backing and attach to radiator. Simple and helps direct more airflow through the radiator instead of around. I am running a stock I7-8700k and haven't seen it hit 60C yet even in heavy gaming at 1440p on ultra with a 1080ti. My room does get warmer though which tells me the radiator is getting the heat blown off it and I attribute that to the radiator gasket. Try it!

Nice gasket. Does its job. Glue is just about right so its secure once firmly placed, but can be pulled up if you are having trouble placing without destroying the product. Good price.The screw holes could stand to be just a bit bigger, and the gasket itself slightly wider so placement doesn't have to be so precise.Bonus is they are stamped out of a large piece of glue-faced foam but the center is left in place, so you can use as a sound deadening panel on your case. I used it as a second extra piece of mass on top of some other sound deadening I use on my case panels. Bonus score!Keep in mind you can end up having mounting issues with some radiators by adding too much thickness. My Kraken X61 screws were just long enough to allow me to add one gasket between my fans and case (mounted as case, intake fan, then radiator), but just barely. I could not add the second gasket between the fans and radiator. May have to get new, slightly longer screws to accomplish that. Not a fault of the gasket, it seems the thickness is a good trade off of isolation and not being too thick to cause mounting issues, just keep in mind.

The dimensions were fine, quality of the foam is fine, the problem was with the sticky side of the foam. The piece you would normally peel off the sticky side was already coming off and there wasn't really any stickiness left to stick! I may contact the seller but overall i would have rated the product 5 stars if only the sticky side was still protected by the peel back material.

They go on easily, but you may have to cut your own screw holes in the middle sections depending on your radiator layout.

While the pictures for this product show just the gaskets, the area between the gaskets is cut out, but included. This was actually a pleasant surprise as I ended up using it as adhesive sound/vibration deadening. This much material would have cost about $10 from Silverstone. Free gift!

Didn’t fit h115 smoothly

Works as advertised. gg case vibrations. I'd have preferred a much less permanent solution to the adhesive used (you can't really resuse since the adhesive is stronger than the foam and it shreds apart).

Too expensive for what they do. Go to Michael's or other craft store and buy some thin foam and cut them out yourself.