Out Front Combo Extended Mount for Wahoo Elemnt，Bicycle Mount for Wahoo Elemnt Bolt,Elemnt Mini,Sports Action Camera and Bike Lights

Wanted to have my Wahoo higher up in case of charging. It looks very sleek on the front of handle bars and sits up high and far away so I can lug in portable charger, if needed. Very sturdy and was an easy install for my friend.

This product is great! Installs in minutes and I bought 3. Put them on Gravel bike and Road bike both look fantastic

Was looking to clean up my bars and this was a great option since it was a quarter of the price of the Enve outfront mount and included the gopro adapter, however there are a few things to note.1 - The construction of this piece is pure aluminum and have no doubts about it's strength (no way you can bend this with your hands).2 - The mounting system requires 2 black metal tube washers to be placed between the mount and the stem face plate. As a result, this extends the distance of the mount from the bars and also creates a little bap between the back of the mount (parallel to the cars) which, to some could be a bit of a turnoff from an asthetic perspective, but frankly not a huge deal.3 - The mount is at a height where you computer is nicely flush with the top of the bars. However, the big turnoff for me was the angle - because it mounts in the face plate screws, your mount will be held at whatever degree your stem is. In otherwords, (assuming no offset from the steerer tube) if you have a -12 degree stem the mount would hold everything at -12 degrees, similarly if your stem is +6 your computer would be +6 degrees. So, despite your bars being rotated level, the mount follows the faceplate bolt, which follows the stem.An alternative i thought would be to ignore the black metal tube washers, which would allow the mount to be rotated down when screwed in. However, I quickly nixed this idea (as I suggest you do as well) because without a solid contact point for the faceplate, the bottom 2 bolts could not be tourqued to spec and you're trusting the top 2 bolts and a not 100% flush bottom 2 bolts to hold your bars.In short, I think this is a great mount, but lacks a little of that rotational adjustment that would make it perfect. Also, although they make the adjustable mount, it just a bit clunkier and does not rotate in the direction one would want.Finally - I purchased the Corki version as well and can confirm that the packaging and the mount are nearly identical. This one had a little nicer finish, and the go pro mount screws in front to back vs side to side (though the gopro channels on both face forward as appropriate on both versions).

Easy install. I didn't have any issues

I purchased this in order to put my wahoo elemnt roam up front. It is exactly what people say it is, if your screws are angled upward, the whole apparatus will be pointing up. I am okay with this as it will help me see the bike computer better with a slight slant up.I don't race or compete, I ride for fun with my friends and for exercising. I don't need to cruise 30mph continuously so therefore, the aerodynamic part doesn't matter as much.The material is a nice aluminum finish. It feels sturdy, the weight is also perfect. Most importantly, its NOT crazy expensive.This fits into the bottom screws of my handle bar setup without any issues. I ride a Pinarello Gan Disc.Overall, I am very please with my purchase, especially for the price.

I got sprint SL stem and spesh aerobars. There's no space around stem for standart mount from wahoo or k-edge. This mount came in very handy. Have recorded a few videos with go pro as well. It takes 5 min to install. Well worth the money.

I have 2 issues with this so I took away 1 star for each.1. If you have a mountain bike stem this mount isn't going to be wide enough where the bolts go. I have a 2018 Yeti and the stem is wider then the mount.2. If you have a bike with a "steep" head angle or steep stem the light isn't going to be able to point down at the ground much if at all. My bikes head angle is 71.6 degrees and my stem is 7 degrees. The light isn't able to point down. It actually points up when you have it pointed down the whole way. Great for looking at the trees or blinding people.You can KIND OF fix this if you take the mount apart, and flip it upside down. It still doesn't point down much but it's a little better.Other then that it's easy to install and seems to be built ok. You can take it all apart and replace things or flip it upside down like I did if you need to.Depending how my rides go this week and how much light actually gets to the ground infront of the wheel I may keep this or return it.

Using for my GoPro and Wahoo, as some have mentioned the angle isn't adjustable and will be at whatever angle the stem is, easy fix though as this is aluminum and can be bent a bit. I put it in a vice and bent it down about 4 degrees so it's almost flat.

There’s not enough thread to attach the computer mount and camera mount )they have to thread into the same holes). You can attach one or the other but not both.

Hasta ahora muy bueno

Spot on! What I wanted and what I got!

Plastic spacers unabled tightening the headset bolts enough to assure the handle bar doesn't slip.

Buen producto y muy buenos materiales