CGA-320 Keg Regulator, Quick Disconnect CO2 Kegerator Regulator with Pressure Adjustment Knob, Beer Regulator with Safety Manual Pressure Relief Valve, with 2 Swivel Nut & 1/4’’ & 5/16’’ Barb

Update: Manufacturer contacted and apologized for the issues. Apparently, they’re a new company and still working to smooth everything out. They offered to send a new regulator free of charge, no strings attached. They noted my critiques and conceded there’s room for improvement. Changed from 3 to 4 stars for proactive vendor.Out of the box, the regulator would not funnel air through the output valve. I followed the instructions for “stuck value knob”, but this did not fix it. I ended up removing the on/off knob. I could have possibly overtightened the knob and jammed it in place.The overpressure preventer value blows out at 40psi. Anything over 40psi (granted this regulator is rated for 60) triggers the emergency pressure release mechanism. I used a ziptie to prevent the release valve from opening. Consequently, the regulator can now comfortably output 0-100psi (I may have received a defective item, but since it was easily fixed, I won’t be returning it. Be warned of potentially faulty regulators. I’m sure many customers have had flawless performance from the regulator, but this was unfortunately not my experience.I will concede that once I modified the regulator, I’ve since had no problems.TL;DR: Defective item, maybe? Rated for 60psi, but realistically can only output 40psi due to an easily fixable defect. Build quality is otherwise good. Manufactured offered free replacement with no required return.Edit: After leaving this review, the manufacturer of this product reached out and sent me a new regulator with a correction to the overpressure valve. They did this free of charge and did not request the old regulator be returned. 5 stars for a proactive merchant with good business practices and customer support. The new regulator works as intended.

This regulator replaced an old taprite that had started to leak. It seems to be made well and is not leaking(3 months after purchase).Leaving a review here to say that, while there are plastic washers included, my regulator came with a tank nipple that has a captive o-ring, like Taprite regulators have. This makes the plastic washers unnecessary. A little confusing for those who've never used regulators with a captive oring, but now i have extra washers for my other regulators.

This setup is a pretty good value. It is well constructed, the filler hose is not overly “sturdy” or hard to handle, the valves don’t seem to leak, the gauges are easy to read. It works just as it should.

Overall this is a good unit. Easy to read, easy to adjust. The only issue is that the hose barb seems a bit small. It says its a 5/16 barb, which would be standard size for a CO2 line, but its substantially smaller than other 5/16 barbs and the hose seems quite loose. I was able to secure it with the provided clamps, but I'm concerned about leaks. I think the barb is actually for a 3/16 hose, or maybe 1/4 inch. It would be simple enough to swap the barb, or change out the hose. Right now I'm using my existing 5/16 tubing and the hose barb, but I might switch it out if it seems the gas is running out fast. - Updated with lower rating. So after using this for a bit I've come to experience all of the same issues other people have complained about. The pressure relief valve started leaking and the regulator cannot maintain common serving pressures (8-12psi). I now have to check my regulator regularly and fiddle with the dial as it often drops to zero pressure at seemingly random times. Its too bad, there's a lot to like with this unit, but ultimately if it cannot hold pressure and suffers from leaks, then its not very useful.

I purchased this to replace the old regulators in my home Post-Mix system. I'm impressed with the quality of the product for the price, but I'd be happier if the range on the gauges were more in line with what's needed for a post-mix installation. That notwithsdanding, it appears to be a very well-made product and it works for my purpose.

UPDATED REVIEW (August 2019): Forever Supplier should be used as a case study for excellent customer service. I had problems with a regulator that I purchased in February. However, the problems started after the Amazon return window closed. Soon after posting my original review, Adele from Forever Supplier contacted me. She kept in contact with me during the entire process, including the return and replacement. Adele even followed up to make sure the regulator was working properly weeks after I received it. This is the kind of customer service that all companies should aspire to. Thanks Adele and Forever Supplier!ORIGINAL REVIEW: I purchased the Keg Regulator in February. Yesterday while attached to the CO2 canister, the gauge started spinning completely around (past the stop point) and then it leaked all the gas from a new CO2 canister. Up until yesterday, it was working perfectly. It has not been dropped or damaged in any way.Unfortunately, it is now beyond the Amazon return window. I am hoping that Forever Supplier will help solve this problem. I had read many good reviews about the regulator, and am hoping that this is simply a defective unit, and not indicative of a bigger problem with the manufacturing of the regulator.I'd be happy to update this review if I am able to get a new regulator that is in working order.

After a month of use, the item has an issue in functioning properly. However, I appreciate the seller's prompt response in issuing a full refund. Thank you for your professional customer service!