📸 Snap Back to Perfection!
The CemobileRear Back Camera Lens Glass Replacement is a high-quality, 100% real glass lens designed specifically for Samsung Galaxy S10 and S10 Plus models across all carriers. This kit includes essential tools like anti-static tweezers and a precision knife, making it easy for users to replace damaged or scratched camera glass at home. While instructions are not included, numerous instructional videos are available online to guide you through the process.
B**O
Good kit to replace camera glass
Great kit which has everything you need to replace broken camera glass. The new glass fits my S10 perfectly and has stuck down well. Great value as the kit includes the tools too, and saved me buying a whole new phone after I smashed the camera glass.Installation was fine for me, but no instructions were included. I found a YouTube video showing how to replace the glass which worked for me. Some notes on how I did it, your results may vary! I carefully removed all the old glass with the included tweezers and knife. This was pretty fiddly. I cut around the edge of the glass rim using the knife, then used the tweezers to pull out all the tiny bits. Take care not to damage the camera lenses. Gentle heating with a hot hairdryer to slightly warm the adhesive helped to remove the glass - take care not to overheat as this can damage the phone. I heated in max 30s bursts. I then gently scraped all the old adhesive off, stuck down the new adhesive layer, removed the blue adhesive covering with the tweezers, and finally stuck the new glass in place. You will only get one shot here so make sure its aligned corrrectly. Bit of a fiddly job but most people should be fine with it.
L**E
Good item
Good value for money, easy to put on
M**Q
Easy to use saves you bucks and you get perfect results!
Easy to install and works perfectly and saved me £200!The pack comes with tweezers and a blade and double sided adhesive template and the glassAll you need to do is heat up the back of your broken glass area for about 45 seconds with a hairdryer or heat gunPeel off the broken glass with tweezers as the adhesive should be easy to peel offOnce all off use a toothbrush or make up brush to brush off any remaining debris and use a microfibre cloth gently to clean cameras and test they all work as expected with focus etcThen use tweezers to place double sided adhesive in place and peel off both sides of clear filmThen use new glass and place with tweezers in place and press down and don't use Ur hands directly otherwise you'll get finger print marksThen your all done maybe put a rubber band around for a few minutes so that it stays in place and you can also use the heat gun or hairdryer again to heat a little to make the glue stick
S**T
Fiddly but works fine
No instructions so had to watch youtube. Removed old glass with supplied tweezers after using a hair-dryer for 30 secs to soften the old glue. Then very carefully used a watchmaker's screwdriver and supplied tweezers to gently remove old glue entirely. Peeled off the new glue pad and carefully placed in position... take your time to line everything up. Removed blue plastic on the glue patch...Then placed glass on top... again, take your time. It helped that I had a magnifier light. Pressed it gently in place and cleaned with microfibre. Just be careful not to dislodge the camera lenses or to get any of the old glue into the camera lens spaces. It is a good solution but as it is so fiddly it might be a bit intimidating for someone not comfortable with working with small, fiddly things. In spite of that, I am very happy and it just remains to be seen how long it lasts!
D**N
Good value, fairly straight forward for DIY repair
The rear camera screen was broken on my s10+ I ordered this to replace it. This was bought in addition to the glass cover. It was fairly straight foward, I used a hairdryer to loosen the original adhesive, this was the hardest part. The replacement parts fitted well and stuck down well. The glass is slightly higher the original but you cannot notice it, especially the phone is in a case. Tools included were better quality than I expected.
B**W
Diy fix
Great price/easy use
T**M
Very good
The glass didn't fit my S10e but that's my mistake. Otherwise, the tool is very good
D**E
Had to adapt
Not sure how long this will last but appears to do the job. Kit turned up but on inspection all was not well. Although the actual lens cover appeared as expected, the adhesive pad was a let down. I had to use the supplied scalpel to cut out 2 windows that covered 1 of the lenses and the led flash. After doing this all looks well though. Time will tell. Printed instructions would have been useful.
A**U
Répond au besoin
Réponds au besoin. M'a permis, de remplacer, mon écran de téléphone sans problème.
C**N
producto de primera, perfecto
perfecto
B**.
Einfach Klasse
Ich bin sehr zufrieden mit dem Cemobile Rückkameraobjektiv-Ersatzglas. Das Ersatzglas passt perfekt auf mein Handy und die Qualität des Glases ist hervorragend. Der Austausch des Glases war einfach und die neue Linse hat meine Fotos deutlich verbessert. Ich bin beeindruckt von der Klarheit und Schärfe der Bilder, die ich jetzt aufnehmen kann. Ich kann dieses Ersatzglas nur wärmstens empfehlen.
N**K
Oggetto di ottima qualità
Il vetro è di ottima qualità e si adatta alla perfezione nella sua sede.Anche il sistema per l'applicazione del biadesivo è molto intelligente e comodo. il Biadesivo è fornito separato dal vetro, ma è applicato su una seperficie di plastica rigida delle dimensioni del vetro. Per l'applicazione si rimuove il velo protettivo e si applica al posto del vetro, successivamente si rimuove la plastica rigida liberando la parte adesiva dove poi sarà applicato il vetro.Molto utili gli utensili forniti insieme al vetro di ricambio, non sono di qualità eccelsa ma per un monouso sono ottimi.Consiglio per chi si cimenta nella sostituzione: la parte difficile non è l'applicazione ma la rimozione del vecchio, fare molta attenzione a non far rimanere frammenti di vetro tra le lenti delle fotocamere perchè questi potrebbero bloccare il movimento di messa a fuoco. Fare attenzione a non strofinare gli utensili con il bordo esterno della sede del vetro, perchè essendo metallo verniciato (o anodizzato) c'è il rischio di rimuovere il colore esponendo il metallo. fare attenzione a rimuovere tutto il vecchio biadesivo, eventuali parti rimanenti potrebbero lasciare aperture compromettendo l'impermeabilità del dispositivo.Se applicato correttamente il risultato finale è pari al nuovo.Non ho testato la durezza del vetro, non so se è soggetto a graffi o cose del genere, ma in assistenza mi avevano chiesto 160 euro per la sostituzione, ho pensato che valesse la pena provare a sostituirlo da solo, e per il momento sono molto soddisfatto.
K**E
super
hat easy alles geklappt, daher voll 5 sterne, toll wer auf diese idee kam
Trustpilot
1 month ago
3 weeks ago