ARKSEN 84 x 39 x 6 Inch Universal 150LB Heavy Duty Roof Rack Cargo with Extension Car Top Luggage Holder Carrier Basket for SUV, Truck, & Car Steel Construction

Used it with a cargo bag on top and it worked very well. Easy set up and feels sturdy

Very nice for the price. Some commented about the screws rusting. So I spent $20.00 and bought all stainless steal screws to assemble the unit. Then I painted the screw heads with black nail polish to give them even more protection. Looks great on top of my Expedition. Will hold all my camping gear nicely.

I liked the packaging. The simplicity of putting it together. The 64" one looked big at first but once assembled and mounted it looks great. Doesnt seem cheap and all the parts fit and we're accounted for. I also had to flip the bottom piece upside down that mounts the rack to the cross members. That took longer trying to get it to fit right and not move than the other portions of the assembly. The only issue I have is when you use the smaller screws to keep all 3 parts for the basket together and the plates on the outside that the screw heads are almost the size of the hole for the plate. I solved this by applying washers on there with it so they don't dig through the edges of the whole and ruin it. Besides that I was happy with how quick it came and the quality of the product. I love the open spots on the plates to be able to slap some stickers on it!

We bought this cargo carrier to keep our vehicle from getting over crowded since we have a little one and sometimes he can require extra stuff plus it worked well when bringing extra stuff home that we purchased on our trip. We have done roughly a 1000 mile round trip so far and it held up great!! I do a lot of due diligence and spend quite sometime in research before I make a purchase that I hope to get plenty years of life out of, and I can say that this product is very sturdy and built well. I read were a lot of people had issues with water, and parts rusting so when I was assembling I had a tube of clear, waterproof, silicon caulking that I used to fill each end of the tube at least a few inches in so when I slid the pieces together there was no way water would get through. I also made sure each bolt hole was covered as well so when I bolted it together silicone would purge from the holes so I knew I had water proof sealed bolt holes. Then I just wiped away the excess silicone caulking so it left no mess on the frame. Instead of purchasing a bag to put stuff in I bought two heavy duty tarps so I could cover whatever shape of items I was hauling (plus it was cheaper). The netting came in handy to keep the tarps and their corners from moving around and I used a few ratchet straps to keep the load secure as pictured. The brackets I installed so the nuts were on the bottom facing my roof, so whenever I made stops I could check to make sure they were tightened and you can’t get to them if the nuts were facing upward since the cargo would be sitting on them. I also took a medium sized pair of pliers with me to give the nuts a few extra turns when tightening but being careful not to brake anything. Overall definitely a great purchase and would highly recommend this carrier to anyone looking to purchase one.

Assembly is very easy, but you need to plan first. Make sure you have some snips on side cutter on hand. There are a lot of zip ties. Next, use red thread locker with every screw. They are tight, but don't take the chance. Do not use the supplied allen wrench. Use a hex fitting on an impact wrench. Be careful not to over tighten and strip the bolt. You only need to go until you here the first click. Assembling the rack is simple and the directions aren't bad. Make sure you follow the assembly order or things won't fit. If I were mounting this permanently on my truck I would put shrink tubing over all the joints and get some really good, thick rust prevention coating. The welds are really poor quality, but for the price, it's what was expected. I mounted this on a 2023 Toyota Tacoma SR5 with dual cab. My rails are OEM. The tube spacing isn't perfect to mate up with my truck roof rails, but it's good enough. The rack does mount securely. When I grab it to shake it, the entire truck moves. This rack does come with a lot of road noise. On the interstate, it sounds like a jet engine. This will be good enough for my move out-of-state, but it will not be permanently mounted. The road noise and wind noise become extreme above 40mph.

I installed this roof rack on a 2020 Toyota Rav4 Hybrid. The roof rack took about 45-60 minutes to put together myself. Lots of screws and lots of packaging that needed to be thrown out (like zip ties). I found the fit of the screw threading and the male/female insertion points on the rack pieces was very good. I was afraid this would be too big but it looks right on the car, proportionate. The rack hardware also installed easily on the car (the clamps that connect the rack to the roof rack bars). Only issue is that this rack is not a 100% clean fit with the 2020 Rav4 roof bars. More like 95%, just slightly off. But it fits close enough, feels solid and sturdy, and I will use it and not return it, but just flagging it for other owners of the 2020 Rav 4 (this may also apply to some Lexus models since I think the Rav4 and Lexus SUVs use the same roof bars). It looks good from the road. You would have to be eye level to the roof bars to see that it is not 100% fit. The Rav4 roof bars are mounted in a fixed position, cannot be adjusted, so that wouldn't help with fit for this roof rack. Also glad that this item shipped very fast by Fedex. Very happy about that.

Good