LED Fog Lights for Ram 2013-2017

Great product, easy to install. Like all the other posts, one of the wires needs to be longer to be able to reach the passenger side.Besides that they look super clean definitely like the brightness at night.

100% plug and play install! I did not have to make any modifications to these lights at all. Perfect fit on my 2016 Ram 1500 crew cab Laramie. I'm not one to typically leave a review, but after reading the other reviews about the problems people were having, I felt compelled to leave this review.The lights are very bright and aligned almost perfectly when i finished the installation process. Total installation tie was about 30 minutes because I decided to run the running light wire up through the frame of the truck.

Replaced the lousy dim OEM fog lights on my 2017 Ram. A 2017 truck with no DLR... really. My 2014 Ram had DLR's.Lights are very close to OEM quality except the alignment adjustment screw is a little less beefy but no issues adjusting. One reviewer complained about breaking the adjuster. Both OEM and these lights have plastic adjusters so like with any plastic item care is needed. Mr. Gorilla hand isn't needed. It's set once and forget item.The light are much brighter probably 6500k more blue than the dull OEM white. The LED DRLs are bright even in strong daylight. Look good too.Installation took about 30 minutes - no issues. Instruction sheet is typical Chinese converted to English and basically worthless but not necessary. No special skills/tools needed anyone with a 12mm socket and can unplug a connector with basic wiring talent can do it. If you can't figure out three 12mm bolts, 12V plug and fuses this isn't for you. Have a knowledgeable person do it.The lights came with a power polarity reversing adapter. Apparently the LEDs are positive - negative reversed and won't work on US cars without the adapter. My only complaint is the adapter wiring plug backside isn't sealed for water protection. I used silicone (RTV) to seal it then taped the 2" leads.The hardest part is snaking the DLR wire to the engine compartment fuse box..ugh. I connected to the #F93, ACC/Cigar Power fuse using a 2 in 1 fuse adapter and 5A fuse. BTW... Ram uses the smaller micro fuses not the standard mini fuses. Anytime the ignition is on the DLRs are on. Not sure how long they will last but are 100x better than the OEM junk.

These things are awesome and bright as hell. I especially like the running lights when I don't need the fog lamps, pretty cool. Fitment was excellent. I have given 5 stars, but had to switch polarity on the provided little pigtail to make them work. Very pleased with appearance. I was going to add picture, but it really didn't do it justice.Hunt more deer, people!

Install is straight forward except running lamp portion your going to need a wire tester and wire joiner plugs pretty sure that’s not what they are called hopefully you know what I’m talking about. Anyway find wire on running lamps on main headlamps on join wire on fog light running lamps that’s it everything else is straight forward except for pulling the whole front of the truck off to get to them.What is Dodge doing? Shouldn’t have been this hard to change out. Be better LOL. Good luck take your time

Light looks great and bright, I love the daytime running light as well. Definitely recommend

Passenger side light was dead on arrival. Tested truck wiring with old light to make sure it wasn't a mistake on my part. They look good and the driver side one is bright.Will update review when replacements come in.

Upon initial unboxing and testing, the lights appear to be a great design and showed potential. Installing fog lights on a Ram 1500 is very easy, it’s just three bolts and one electrical connector. I swapped these into my ram in about 15 minutes and plugged them in.Initially I was happy because the swapped wires inside the connector was not n issue with mine, hopefully it’s been addressed at the manufacturer and will not be an issue again.After crawling out from under the truck I noticed that about 3/4 of the inboard stack of LED modules on both sides was inside the bumper cover and would not project light to the road. I was super frustrated and unhappy about this and, after some research, found that I was not the only one with this problem. As a fix, I replaced the bracket that came with these lights with the bracket from my factory lights. The locator buttons are NOT the same on the factory housing as they are on this product so it was not plug and play. After some engineering and fabricating, I made a solution that worked for putting the new lights in the factory brackets. I reinstalled the lights and they were now aligned properly and all the modules projected through the opening as they are supposed to.I wired up the DRLs to an ignition-on circuit (cigar lighter in my 2016 Ram) and tested everything. It all worked fine and when the sun went down I aimed the lights.Overall I am now happy with this purchase but it did take a lot of work that would likely be outside the abilities of the average user. If you want plug and play functionality, I would not recommend this product. If you like tinkering and fixing, you’ll definitely get your chance with these. Once they are properly fit-up they are nice and bright and look great as DRLs.