Mounting DreamSoundbar Mount with Easy Access Design for SONOS Beam, SoundBar Bracket with Sliding Block Fits TV up to VESA 600x400mm, Compatible with The Beam Constructed of Duty Aluminum Profile

This is a solid product, and it works well for mounting the Sonos Beam to the top of a television. There are no included instructions for doing so, but it is not too hard to figure out.

Very good product, easy to install, sturdy and comes powder coated in black. I shopped around before buying and took allot of measurements before I purchased this one. This is made for a Sonos Beam Soundbar and it fits perfectly. Great price and is half the price of a similar item on the Sonos web site made by Sanas. It does not block any connections or ports because the vertical supports are applied to the TV's existing Vesa bolt patterns. It will fit TV's up to Vesa patterns of 600mm X 400mm. My Samsung 50" TV is 200 X 200 and fits great. Also, a great place to buy a high quality TV mount at a low price is Monoprice. That's where I get all my Heavy Duty TV mounts. I do recommend this Soundbar mount.....You will be pleased !

I’m using this soundbar with a Mounting Dream brand TV mount so they work very well together. It’s easy to put together. My only complaint is the two screws they give to attach the actual soundbar to the mount are silver while the rest are all black. So literally the only two screws you can see once everything is put together are silver against an otherwise all black mount.

I have wall mounted several televisions over the years, but this was my first attempt at doing one above the fireplace. I wasn't sure how I was going to approach this, and I really didn't want to just slap it down on the mantelpiece and have even more cord concealment issues. Fortunately, I stumbled upon this mounting bracket, and I'm so glad I did. It takes a little bit of experimentation to get it installed correctly for your application, but it's so worth the effort, resulting in a clean, professional appearance that keeps your whole set up looking like you had the pros come in and do it (check out my photos)! Since this was a wall mount above the fireplace, I chose to have my soundbar tilted downward ever so slightly. This is an amazing piece of hardware at an amazing price.

I really didn't want to go through getting someone to help me lift the heavy 75" TV off the wall mount to do this. I measured things before ordering this product and it worked as hoped. Instead of using the VESA mounts I used the screws that would otherwise mount the TV to the stand that comes with it. The screw holes in this case measured 50 cm apart horizontally, 6 cm apart vertically and the lower screws were 5 cm from the bottom edge of the TV.The extra length of the bars from the the Soundbar Mount went under the TV mount without interference so I did not have to cut or modify anything. It was a one-person job done carefully in a less than a half hour. Assembly of the mount itself was done earlier to size things up and took maybe 15 minutes. I'm no professional and over 65 but consider myself fairly handy. I used the screws that came with the TV and found four washers to make them comfortably hold the soundbar mount to the TV.With my installation the back edge of the Sonos Beam is just barely behind the edge of the TV with most of the speaker forward of the TV. It looks good to me and seems ideal from an audio perspective. The Beam is about one inch below the TV but that is easily adjustable. (I actually tried a couple different positions before settling on this one.)This was quick and easy for one person and the result feels very solid. About the only thing I would add to the Mounting Dream Soundbar Mount would be a cosmetic panel to hide the wiring (HDMI, power cord and, optional but in use here, Ethernet).

I was looking for a soundbar mount for my Beam Gen 2 that would allow mounting above or below the TV. This is the way. Very easy to assemble and adjust, and very sturdy, this was the perfect choice. You can easily adjust the spacing between the soundbar and television by loosening a couple of screws and just sliding the mount up or down. Looks great and does the job quite well.

So, I guess I didn't realize this thing was for a specific sound bar. I got it out of the package and realized the plate where the sound bar is supposed to connect will not work for my Samsung sound bar.However, there was enough hardware that I could engineer a solution using the brackets that came with my bar. I connected them to the frame using some of the bolts and washers that came in the box and were unnecessary for my install. A quick trip to Ace for some flanged nuts and it all came together really well. It looks great and works a treat. I think though that I'll pay a little closer attention going forward.

It’s pretty good for my wall mount

Si es fácil de instalar

The screws to bolt the Sonus Beam to the bracket is also provided! Clear instructions, easy to set up.

Me llego el paquete sin los Sliding Blocks (07) y sin esos el producto no me sirve