Pinty Tactical 3-4 MOA Red Dot Sight Scope with 3X Magnifier Combo

The 5 stars is partially for the seller. The first one I got was not working properly. The red dot did not stay on. I originally wanted to return it but the seller very promptly got back to me and were extremely friendly and attentive. Best customer service I have seen in a very long time. They offered to send me a new one and I accepted. I received the new one very quickly. It takes a bit of adjusting and playing with but it works pretty well once lined up. For a lower dollar unit, it works pretty well. A bit of advice to those looking to buy this. This is not a high dollar unit. You can not expect it to be as such. You can not buy a Yugo and expect a Rolls Royce. For what it is, it is perfect for what I need.

RED DOT :The red dot and riser are solid. The dot is small enough for use with a rifle, although i have not tested this under recoil. For my use on an airsoft gun the dot is more than bright enough on the highest setting, and the dot is small enough for accurate shots. The lower brightness settings (1-6) are not really usable in direct sunlight, but 7-11 are decent. Some reviewers complained that the magnifier and red dot do not line up but it is important that you mount the riser so that the 2 tightening bolts and clamp are on the opposite side of the single bolt and clamp on the magnifier, then it should line up.Pros - Price - Solid mount on rail and riser - Good sized dot, minimal blur/star - Good target color, glass tint is minimalCons - Lowest brightness settings are nearly unusable - Riser must be oriented correctlyMAGNIFIER :The magnifier on the other hand is fairly wobbly out of the box, and although usable for airsoft i would not trust this on anything much larger than a 22 . I took the advice of another reviewer (Thanks!) and bought some 5mm thin wall brass tubing from a hobby shop and press fit that over the bolt on the magnifier. This removed much of the play, and the magnifier now returns to more or less the right position.Pros - Price - AdjustableCons - Eye relief is short - Mount needs DIY fix - Some blur/star your results may vary

For the price its not bad at all. The red dot is good and well made, the magnifier great as well but i only have one issue with it. I mounted it on but it has a bit of a wobble to it and wont zero in perfectly. Other than that this is a great product for the price!!! I would most definitely recommend it to anyone who is looking for a budget friendly red dot and magnifier.

Alright! I have read many reviews on this item.... like most said the flip bracket is garbage! Or is it? I will be getting back to this and a fix!The Red dot works fine. Works with 5.56 and 350 legend fine. No shifting or falling out of zero. Recoil does not really effect this design much. The riser is well made and is correct in height and is to .001mm in plain.Now for the magnifying end. The optics in this unit work great. They have a adjustable screw uder the unit to alight it up and down and a screw toward the front for left to right. You have 5mm in each direction from center to center this optic with you red dot. The front eye piece will turn so you can fine tune its image as it looks into you red dot.Now for the mount! Yes is is very all over out of the box! Here is the issue and how I fixed mine. The holes in your bracket as 5mm and the pin they used is 4.66mm. You have .44mm of play around the spring pin. How I fixed this was I went to my local hardware store. I bought a piece of 5mm hoddy metal pipe. Comes in brass and aluminium either would work. These pipes are .2mm thick. Cut a section same length as the shaft. Put it in and through the holes. Then put you bolt back in. When that play is gone you will have a nice functing unit. I knew go in into my purchase this was going to be an issue. So i kind of expected it. I knew the bolt was the issue and was prepared to make a new one before I bought it. But the small aluminum tube I slipped over the hinge bolt was a 5 minute fix.I gave this 4 stars cause it should just be made right to start with. For a lower end fun plinking setup. This would be fine to use. Yes it takes recoil. Yes it works fine if the mount is fixed like i said. In the photo of the unit flipped up you can see my aluminum pipe if you look close where the spring is!This unit can flip right or left. I had a few challenged people respond to my question that they never actually answered.

So i was excited for this product cause it is really well thought out but that's about it... The mount itself to the magnification portion is very loose and sloppy. Basically its not held down real tight so the scope has a tendency to sway back and forth so it offsets the red dot. If you plan on running with this or doing anything besides sitting still i suggest spend your money on a different one....Secondly the Red Dot itself worked for about the first 50 rounds/held a zero. After about 50 rd i went to shoot again and noticed it was off but the battery had just been put in and was brand new... I jiggled the nob that lets you set the brightness and it flashed on then off. I found that it had to be in-between the numbers not on it as it was previously. After 20 rounds more it changed back to being on the numbers then messed up again...Both the red dot and the magnification have their issues and were brand new first time shooting and have never been dropped. Very disappointed**UPDATE 3 WEEKS LATER***So the seller reached out to me to see if they could resolve the issue and they were very kind and sent me a new one to test. Unfortunately this one the red dot shut on/off with a brand new battery. So not to sure what the issue is about that one but yea. The mount to the magnification was a little tighter but i dont see it staying that way if used. Still cockeyed the red dot through the magnification so yea... Overall the Seller is very kind and quick to fix the issue but thats about all i can say... The products were not worth the money but it is what it is. I would not recommend buying this product.