6 Pack Screen Protector for Apple Watch Series 9/8/7 45mm & Series 6/5/4 SE 44mm, Bubble-Free, HD Clear, Easy Installation, Ultra-thin Flexible TPU Protective Film for iWatch 45mm/44mm

You might be wondering why bother with a pack of six? I would argue that it can take a few goes to get right. Plus, certain things aren’t well documented. The mounting stickers are indeed overly strong, and if your watchstrap isn’t a loop, you don’t really need to remove the watchstrap. My tip here is to re-used the mounting stickers, as they become less sticky and more manageable as you reuse them. What I did learn from fitting is the usual, ensure the watch is super clean, super lint free, and that you place the protector correctly. What I didn’t realise is that, removing the layers in sequence can be a bit tricky, I ruined one by not realising I hadn’t separated the pieces correctly; when I removed the last layer (4) I accidentally removed and threw the whole thing away. Doh. Equally, avoid over folding when removing layers 2 and 3 otherwise it’ll take a while for any crease to become invisible. Finally, small bubbles. If when squeezing out the air you end up with a very small bubble, ignore it (after removing layer 4) – I kid you not, in about three days it will have vanished. And this brings me to my final point, it takes about three days to fully adhere. Don’t sleep wearing your watch for a few nights, otherwise it may try to come off. Happened to me, woke up with a HUGE bubble under the protector. If you skip a couple of nights wearing your watch it will bond and then be fine. This IS a good screen protector, but you need a little care putting it on, and you may need a couple of tries before you fully understand what you’re doing. My top-top tip is leave it with any accidental bubbles you can’t remove for a few days and let the protector settle in, it will be invisible and not lift after that time too. If instead you are tempted to lift and try to reseat the protector, you’ll probably warp it, and it’ll never be right again - chuck it in the bin, and use one of the spares you still have. I also discovered that there are two main protector types, a wet-type and a dry-type. This one is dry. There aren’t any different between brands; I’m pretty sure they come out of the same factory as they look identical, including the labelling on the protectors and the sequence to apply them. So, definitely buy a six pack, periodically you’ll need to change it. Learn from my mistakes. But equally, buy the cheapest one you can find, because they’re all the same (assuming you get the right size for your watch). If you do it right, one protector will last many months if not years ... but then again, that's the catch, you need to apply it right. That took me nearly the entire pack, but its been on for months now and is just fine. Scuffing a protector just means a new protector. Scuffing the Apple Watch and you have to live with the mark. I did this a couple of times with my old one, so now I've invested a small amount in my own idiocy. I think that's worth the money.

This is the second time I have bought this product and it is great. Easy to apply to your watch (watch the video it helps) and the protective cover is invisible and works perfectly. It needs to be changed every few months but it is well worth the money and time to apply to the watch. I have bought a different brand in error and this was useless, I won’t make that mistake again!

UPDATE February 2024: I managed to find a video for a similar product and saw how to correctly install the protector on my watch. It’s since lasted for 2 weeks so far without peeling and looks perfect. The seller contacted me and offered a refund, which I really appreciate, but won’t take now. All I’ll say is please put the correct link to the installation video! It’s actually a really good product but obviously doesn’t work properly if not correctly installed. Original review: I bought this product because I wanted an Apple watch screen protector that would protect against scratches and knocks; the Apple watch is not like a normal watch because you touch it so much through the day. I didn’t want anything bulky and the good thing about this product is that it does protect the watch from scratches without being bulky. It doesn’t affect the touch screen features of the watch, and is easy to remove. However, as other reviews have said, the instructions that you scan the QR code for are completely wrong. I had to work out how to apply the screen protector, and it does bubble if you get it wrong. Good job you get 6 covers! The covers seem to react to heat, too. The first one started to peel at one corner after about 3w of use in the English winter, so I presume body heat gets to it on the end (English winter = thermal base layers). However, like I said, you do have 6 covers. The product is okay, but I’ll probably look for another brand when shopping for watch screen protectors again.

Very impressed with this product. Firstly, DO WATCH THE INSTRUCTION VIDEO at least 2-3 times BEFORE starting the process - it really does help clarify some of the later stages when you have to remove the various protective backings. (it would have been nice to have a QR code link to this on the supplied card rather than having to type out a URL). I wasted my first attempt after only watching the video through once - do pay close attention to how the film comes off in Step 10 onwards , once you understand this the install is a breeze. Another reviewer here mentioned they had 6 of the sticky foam watch holders but my box only had one and it was not the same that shown in the video. Also, it was only slightly sticky on one side, the other side had no protective film as described in the video and was not sticky at all. This did not stop me installing the protector but I did have to take extra care when initially positioning the protector to prevent the watch from moving. Also, the supplied squidger was bent out of shape so I used a credit card as an alternative (more protective packaging would be a good thing as the box was bent out of shape quite badly on delivery.) Once installed it really is invisible, you have to run your finger over the edge of the watch to feel it is there. Touch sensitivity is perfect, for me there is no difference in operating my watch with this protector in place. I will see how it performs over the coming weeks but based on how the product is working so far I would recommend this. Well worth the price - and installation effort ;)

Just received the iWatch 3 screen protector, it's easy to install and looks nice and seems sturdy, and protects the watch very well (I just got it, so will see how it is after a couple of months). I thought the watch may look bulky after putting on the protector but no, it's looking nice, I like it very much. I will have to see how it will last after a couple of months..but my first impression is this is awesome!! Thank you.

uygulaması çok basit kutu içeriği 6 adet olması güzel. uygulandıktan sonra varlığı ile yokluğu ayırt edilmiyor.

I have both the 41mm and the 45mm. The 41mm is great, I would give it 5 starts. It is invisible and you can’t notice it. The 45mm is just too small for the watch and you keep feeling the edges as you swipe with your watch, it’s super annoying. 2 Stars for this as it drives me crazy. Both were easy to place without bubbles.

it does not work for the redmi note 8T. it is small. it is narrow and short. it does not protect the entire screen.

Posé sur le cadran d’une Apple Watch en 40mm. La pose a été simple. Maintenant j’attends de voir s’il ne se décollera pas lors de mes cours d’aquagym