PERLESMITH Universal Floor Speaker Stands for Surround Sound up to 22LB, 27.56 Inch Bookshelf Speaker Stand for Klipsch, Polk, Yamaha & Other Large Satellite, Bookshelf Speakers, Studio Monitors,1 P

Works well with my AudioEngine 5 speakers. Requires multiple steps to assemble, but the steps are easy if you are even the least bit handy. The assembled units are sturdy. The color is discrete: black glass base and top; matte black support column. In short, does what I needed it to do.

Great speaker stands. They were decent quality, sturdy and came with everything you needed. I used mine for the rear Klipsch speakers which are heavy and they are very solid. I like the rubber pads for floor, and they include the hardware if these are to be set on carpet. 5 minutes to put each stand together and it came with the wrenches so I didn't have to dig into my tool box. You will be very satisfied with this. Stand height is perfect for Home Theater - right at ear level.

First of all, they came beautifully packaged. Everything was in perfect condition. Now, the fit and finish of these stands is outstanding. The black tempered glass is absolutely beautiful. Assembly is very easy and took 5 minutes. Once together, you have a solid stand that is simply beautiful to look at. It will add to the overall appearance of your bookshelf speaker. It will then have a very classy, elegant look. The pictures here don't do them justice. You have to see them in person. I'm using them for my front speakers, Klipsch RP-160M. They're pretty big and weigh around 20lbs. each and these stands hold them with no problem. And they look great on them! This is so much better than those cheap wooden stands (MDF) made of particle board, where the holes don't always line up and you end up splitting the wood when driving the screws. With this stand, all pieces are precision and everything fits/lines up perfectly. All in all, if you want to add beauty to your media room as well as having a nice solid stand for your bookshelf speaker, this is the one to get. You will not regret it. Worth every penny. Actually, IMO, it's worth a lot more than the selling price. Thank you Perlesmith for an outstanding product!

These stands have both strengths and limitations worth noting. Cons: The stands are not height-adjustable. Speaker wire must be threaded through the pole before attaching the base plate, which may complicate setup. The top plate only uses non-slip pads to hold speakers in place, with no additional securing mechanism. Pros: Attractive design, featuring a glass base that lends a modern, upscale appearance. Straightforward assembly, easy to put together with minimal effort. Stable on both carpet and hard flooring. Sturdy enough to support bookshelf speakers (currently holding Klipsch R-41M speakers without issue). While the lack of adjustability and limited speaker security could be drawbacks for some, these stands are stylish, easy to assemble, and reliable once in place. They are a solid option for anyone seeking a simple and visually appealing solution to display and support bookshelf speakers.

I really like the look of these stands. The tempered glass is nice & thick, and should be much easier to clean than MDF stands. I really like the larger floor base and speaker base. It should keep even the bigger bookshelf speakers very steady. My speakers are 7 1/8" wide x 11" deep and the placement looks really nice. Assembly was fairly straight forward. All the bits and parts were included, and everything fit together as expected. I love the larger floor spikes. Shaped well enough to keep it steady on the carpet without piercing too deep into it. I do have some complaints, none of which is worthy of a ratings ding. If I ever have to move the stands and/or replace the cables, I think I'll probably have to take it apart to get the speaker cable to thread through the bottom hole and come out the top hole. I have fairly thick, molded banana plug cables. On assembly, I ran the cable through the detached tubes before connecting them and attaching the ends to the plates. The center support rod came in two pieces, and there is a nut in the middle where the two pieces connect. I am certain the plugs will snag on that nut if I were to pull or push the cable through the assembled tube. I'd really rather not have to tug & pull to run a wire through. This is probably not an going to be an issue with thinner non-molded cables. It would have been better to have designed some form of cable management outside of the tubes. Also, the edges of the holes for the cable management are not smoothed out, so be careful about pulling cable through and rubbing on the edges. They're not super sharp, but they will scrape your cable if you pull hard and tight. Finally, here is no notch or guide (at least none that I found) that will allow you to make sure the top plate and bottom plate are correctly aligned. It may be an OCD thing to want to sides of the top & bottom plates be perfectly aligned, but most people will probably be ok with "close enough." Overall, I am very happy with these. They do the job and they look great!

The stands are sturdy, well built and an absolutely amazing value. They are sized very well for my Klipsch R-50Ms. Set-up is simple and it's a really nice touch to be able to hide the speaker wires inside the pole. I purchased these as a temporary solution, however, once assembling the product, this is now a permenant solution.

Easy setup with decent instructions and tools included. They look great. My only complaint is the stickers they placed on the top of the base were difficult to remove (had to use a razor blade to get the residue off).

I just needed a pair of affordable speaker stands but didn't expect the quality to be this good. What a pleasant surprise!

Not adjustable. You have to figure out how to stick your speakers on top of the stand/base. You can use vecro straps

Easy assembly, wiring hidden internally to glass base. Looks great compliments speakers.

Me fue difícil encontrar unas bases para las polk ES20 que son un poco grandes. Aún así me funcionaron perfecto. Son muy fáciles de armar, lucen muy bien y a pesar de no tener tornillería para fijar las bocinas (están solo montadas sobre la base) se sostienen muy bien con los parches antideslizantes. Totalmente recomendado

The speaker stands are very sturdy and capable of holding most bookshelf speakers but I am puzzled that only sticky pads were given to cushion the speakers. There's nothing to secure the speakers to the stands. Fortunately, most of the time the stands will be left alone but I expected more for making sure that my speakers are safe.