18 Piece Extraction Socket Set

I have now used this set twice for extremely stuck bolts. The first bolt I had soaked in penetrating oil for 24 hours and even used a torch to heat up the bolt and nothing seemed to work. I went to autozone and bought a set of socket bolt extractors and it immediately stripped the socket. I then gave up for a few days while I waited for this set to come in. Within 5 minutes of receiving this set I had that darn bolt out. A few days later I had a rusted bolt that was mounted on my turbo pedestal. It took an incredible amount of force but this extractor worked and I used the same 10mm socket, even after using it a second time I could tell it would work again. The sockets are made of a very nice hardened metal that will definitely last. The fluting is machined so that they only work for extraction, so don’t expect this to be an all around set to use. That same fluting really holds tight when extracting. These are amazing and worth every penny, they excel at relieving frustration. I am going to buy every size they offer now.

About 20 years ago I built a bridge to an island on my pond. It is now time to replace the floorboards and to do so I needed to remove the PVC railing I put up then. There are 20 posts with 8 Robertson (square socket) stainless steel screws to hold the brackets that the railings are attached to. While trying to remove the screws the soft stainless steel screws began to strip making removing them impossible without actually grinding the heads off to release the brackets. Over 25% of the screws stripped when trying to remove them. After doing an internet search as to what would be the best screw extractor for this job I came across the Rocketsocket extractors. I received them today and what a difference!!!!! The sockets covered the screw heads and zipped them out like nothing. They did such a great job I did not even bother to use the square head screwdriver to take the rest of the undamaged screws out. I used the Rocketsocket on all of the remaining screws and turned a many hour job into less than an hour. I could have not done the job without this extractor set. They are a little expensive and I would have liked them packaged in a little better case but overall I am tremendously satisfied with them.

I bought this 1/4" set to supplement my larger Rocket Socket set that I already owned. As I'm sure you're aware, many of the bolts/nuts that end up rusting out are often smaller sized nuts/bolts where a 1/4 st like this could come in extremely useful.No, there's no case, but they do come on a metal frame rail. They also just ooze quality. The fact that these are also 100% Made in USA and backed up by a Lifetime Warranty helps to easily justify their reasonable price point.Personally, I've only had to use these one time. I was helping my father install a replacement part on his Suzuki/Nissan pickup truck. There was A LOT of rust in the undercarriage and suspension area - around where I needed to install this part. In addition, access was tight, and the bolt that held the part in was totally rusted. My high quality sockets wouldn't turn the rusted/seized bolt. I remembered that I had this set, broke it out from my tool chest, and placed it on a ratchet extension and BOOM, it's as if the bolt just surrendered. It, honestly, came out with ease. So, you may not need to use these too often, but when you need them -- you NEED them. Who knows how much extra time I would have wasted removing that bolt, possibly hours, if I didn't have the Rocket Socket extractors in my tool arsenal.Finally, these were tested by YouTube's Project Farm (with 2.7M subscribers) and the Rocket Socket was rated #1 for "rounded nut and stud remover." It beat out the more expensive Gearwrench set as well as a $263 Snap-on set, as well! So, let's just say my personal experience matches Project Farm's -- and I highly recommend this set, and all the Made in USA Rocket Socket nut extractors.

Reviews are good on these. There’s a couple of YouTube tests that had these rated one of the best…..time will tell. Hopefully I never have to use them! You will need to buy a storage rack for them as they could have come with better storage for the price…… if they had better storage, I would give them five stars.

Hace bien su trabajo

Ordered these to remove several bolts that were almost completely rounded off on my cars oil pan. These sockets removed them with ease. I highly recommend these sockets.

BMW tightened this oil filter housing bolt waaaaaay too much at the factory. Got the other two out no problem, they came out with a 1/4” drive and socket. This bolt shown took a 1/4” to 3/8” adaptor and an extra long 3/8 ratchet for the Rocket Socket to apply enough torque on it to break it free. Which it did flawlessly. This set is amazing. They bite and hang on tight. Don’t waste your time or money on the imitators.The variety of sizes help to get just the right size, which wasn’t obvious at first. I was so impressed that I bought this set’s bigger counterpart too. High quality, easy to use and made in the USA, works for me. This is a company I am happy to support. Thank you for making these!

Had a stripped head on a transmission pan bolt that was above the exhaust. With a wiggle extension and impact was able to get it out fast and easy. Tried other kinds didn't work this one is amazing.

Bought an old truck for summer project not well maintained (read project) corrosion and some already rounded bolt and nut heads.Bought a cheaper set worked on some but wouldn't fit right on a few..On the advice of a friend got the Rocket Socket and even though labelled the same sizes it fit way better for some reason.Got job done and now convinced they are better than the cheap knockoffs.I have other tricks to remove rounded bolts but recessed bolt heads were preventing me from using those tricks.This tool made short work of a big problem.

These are renowned in the USA for Quality!.I purchased the full set in the different drive socket sizes including the 8 piece set and they are Awesome.They don’t rust as they are made from a stainless steel material.They grip extremely well and do the job as described.

This saved my life when i was doing a oil pan replacement on a 6.4 powerstroke. They bit so hard and isnt that what you want from these ?

Helped remove stripped Torx security screws from airbag bracket.Very happy with result!

Not the cheapest but excellent quality