DeYoungArbeit Gun Magnet 56lbs Rated Magnetic Gun Mount, Anti Scratch Premium Rubber Coated Holder for Rifle Pistol Magazines in Vehicle Truck Car Wall and Desk, Indoor Gun Racks

First off let me commend the seller. Listing said free overnight shipping. I ordered on a Sat at 10 PM and received at 11 AM the next morning. A+ for the seller. I don't usually write reviews unless a product exceeds my expectations. What I expected was something that would barely hold a pistol. I assumed the 56 lbs holding power was marketing hype. I bought this thinking it should at least hold a magazine or two. What I got was amazing. I didn"t test the 56 lbs pull power but I made the mistake of sticking two together. I almost had to throw them away because I couldn't get them apart. Finally a small screwdriver separated them. So here's the run down on what you get. I ordered the 4 pack. In the box was 4 mounts, 1 3/8" W x 3 1/2" L x 1/4" thick. Covered with a durable 1/16" thick, slip on cover. I should note that the back of the magnet is recessed about 1/16" due to the overhang of the cover. If you intend to use double sided tape it would need to have some thickness to work well and then it might pull apart when you removed the weapon. Wood screws included were : (8) 1.25" long and (8) .75" long, no expansion wall fasteners. So how well do they work? Well, amazingly! I tested several different, full size pistols and they held extremely well. Even when attached across the width of the mount. The polymer and alloy frames pistols stuck well from just the steel slide. The magnets are powerful enough that you can't just pull straight away from the mount. You have to roll them off. I did not try this but I believe one of two mounts could hold a rifle or shotgun if there is enough flat metal surface for the magnet to adhere to. I was able to suspend a 10.5 lbs AR from just it's pencil size barrel. I wouldn't recommend that since the magnet doesn't get full purchase on a small round barrel but the gives you an idea of the holding power. These things have other uses. They will hold 2 or 3 loaded magazines with ease. Use them in the garage to hold tools, mount them to the lid of your shooting or gun cleaning box to hold small metal parts or tools in use. Got a lot of metal savings on your work bench. They'll handle that but a a pain to clean afterwards. Want to separate steel shell casings from brass for reloading? Spread the casing out on a towel and pass the magnet over it. You'll the magnet filled in no time. Everyday I find a new use for them. Amazing!

I usually never write reviews, however this magnet inspired me to do so. Surprisingly strong, and it will do exactly what I need it to do. I carry a "truck gun" usually just a beater that I carry in the woods, fishing or camping. This magnet is perfect for the job. I ordered 4, one for the truck, jeep, the old lady's ride, and I'm even going to install one on the boat. Great product for "easy access" if you know what I mean. I feel more comfortable leaving a firearm in my truck without worrying about someone seeing it and trying to break in. It's very strong, I don't think I'll have to worry about my guns falling off. Works great for my M&P 22 magnum, sig p365 x macro, hell, I even hung a big ole 44 magnum from it. It does it's job, and it does it well. Great product guys!

Strong magnet. One will hold a 9MM upside down.

I got these for myself and some guys I work with as a Christmas present. They come with adhesive strips as well as screws, depending on what you want to attach it to. I screwed it under my dash and it holds my Glock sturdy but is also easy to pull off when needed. Whether you’re mounting this under a desk, over a door frame or anywhere else, know that it’s going to be secure and sturdy!

In my gun safe, there is a felt lining on the door. If I put the magnetic part to it, it sticks to it. That would be great and I wouldn't have to drill to mount them. But, in doing this, the magazines do not stick to the magnet. So, I have to turn it the way it was intended and I had to use an existing screw because the felt could not be drilled through. I was only able to screw in one side, so the other side I used velcro and gorilla glue to keep it up. It can magnetize as many magazines you can fit. I only have 2 but it looks like each one can hold about 6 or 7 magazines across it. Having 4 of these is nice as most places are charging the same price for just one of these. It would of been nice if these had magnets on both sides so it can stick to the safe AND hold the magazines at the same time. There must be too much rubber to allow it as it can only stick on one side and not the other, so you actually have to mount with screws, even on metal.

Works great on my dash for my pistol a maze. How strong this little magnet is. I was really impressed. It doesn't drop my pistol going down rough roads

...and I LOVE them. No joke, more than 800 56lb magnets from DeYoung. See photo of all the 6-pack boxes. We build high-end concealment cabinets, all solid hardwoods and premium materials. From that extensive experience, here's what I know for sure: 1. This will NOT scratch or mar your gun. As long as you don't leave a screw loose, you're good. 2. It will NOT affect your firing trajectory by magnetizing your ammo. Because physics. Trust me, or look it up. It's not an issue. 3. The 56lb version will hold ANY gun. Almost. Non-ferrous slides are fine, because the mag will hold the barrel. We've had issues with only 2 models: The S&W Compact 22 has a fairly beefy aluminum slide. Not normally an issue, but it also has a really small barrel (duh, 22LR). There just isn't enough metal in that 22 barrel to stick to the mag. However, any 22LR with a metal slide will, of course, work just fine. And any 22LR with a non-ferrous slide that isn't massively oversized also works. Second, some small revolvers tend to twist, because the round contact patch is so small. LARGE revolvers work fine, oddly. More metal = more stick when it comes to magnets. So that Judge will hold just fine. 4. DeYoung quality is consistent. The worst I've had is a previously-returned box that had some drywall dust on the mag. But that's ONE mag out of 800, so I'm not about to complain. Literally everything else I've bought from DeYoung is the same...high quality, well-built, and consistent. It took me a dozen or so purchases before I found a gun magnet that didn't suck. Most have hard plastic covers and just feel cheap. Feel free to skip all that nonsense and buy this one. I have many, many happy customers that agree.

Fantastic. Used the screws into the wall and holds up my stuff perfectly and feels like a solid hold.