Spigen Perfect Armor iPhone 6S Case with Extremely Durable Scratch and Drop Protection for iPhone 6S 2015 - Black

Please not that this review is for the Perfect Armor version of Spigen cases.I've been on the hunt for a protective yet functional case for my Iphone and until I got this case previous purchases have not done the job. So let's just get to the good stuff and break down this case.The good stuff-feels nice and solid in the hand-entire case (even the hard shell has a nice rubbery texture to it to prevent slips-kickstand is a nice bonus and you can flip it so the volume buttons are accessible-Power/volume buttons are nice and tactile and easily found/pushed-mute switch isn't too far recessed-built-in screen protector is nice, very responsive and not too much glare(a common problem with these is that if you take the case on and off more frequently the adhesive will fail and the protector will fall off. So this is an area where time can only tell.The meh/not so awesome-the port caps have an exposed ring around them. I can look through and see the surface of my Iphone. Dust may be able to get in to the glass screen from here. You would typically see a part of front cover have cut outs that extend down and around to cover this gap on other cases but not here. This can be seen in the stock photos if you look close enough.****Update: Yep hairs and dust find a way in and magically appear under the screen protector-It only comes in black. Black is cool but sometimes.....you want a little splash of color. The electric blue they have is pretty neat....So in short it's a good protective case with a kickstand that may or may not let dust in by the ports. If that doesn't bother you then get this case. If you are looking at other spigen cases my only advice is that I don't think the lip around the edges of them is thick enough.....that's why i tried this case as it has the front faceplate.*****Update Update!!!The bottom TPU part of the case where it snaps into the hard plastic part that goes over the phone screen is very flimsy and does not stay put. I feel like it's going to break at any minute. It just kinda hangs.lays there and doesn't snap in or fit in securely. Not so sure i'll keep using this case.

Let me start by saying that I absolutely love Spigen's "Tough" series of cases for the iPhones. I've used a Tough Armor case on an iPhone 5C and I am currently using a Slim Armor case on my iPhone 5S. Both are excellent and have protected both phones from many a fall. They are, without a doubt, and in my opinion; the best alternative to Otterbox cases out there. That being said, I was very excited to get Spigen's latest, the Perfect Armor for my incoming iPhone 6S. I recieved the case and installed it on my girlfriend's iPhone 6 to see how I liked it. Here's what I have to say about it:Pros-• Finally a built-in front screen protector. This is something I'm sure many people who've made the switch from Otterbox to Spigen have been asking for and here Spigen executes it well. Unfortunately, I cannot yet say with any certainty how well the all new 3D Touch feature will work with it, but I expect without a hitch. Please keep in mind that this screen protector is plastic, and not glass, so a dead-on drop directly on the phone's face onto any sort of jagged and raised surface will likely still damage the phone's screen. However, I suspect the protector to do its job where scratches and debris are of concern.• Outer casing is made of a new material that feels more rubbery than that of those used in previous Tough series cases and feels less slippery to boot (which was one of the only bad things I ever had to say about previous cases). Apparently this material is more scratch resistant as well, so after a month or so of real-world use, I'll be sure to update my review at that time.• Works as advertised! As I mentioned previously, Spigen's Tough series of cases are actually pretty damn tough. I'm a naturally clumsy person and my poor iPhones have survived plenty of falls, on all types of surfaces. These cases really work very well.• Otterbox protection, but MUCH slimmer!! This was probably the single biggest selling point for me. The only thing I ever did like about Otterboxes was the surefire protection the cases offered. However, I absolutely detested how thick and bulky they made the iPhones, how much hotter the phones would get while charging, and the pain in the ass they were to try and ride in jean pockets. They're terrible cases really, and it's no wonder they're no longer the leader in the phone case market. Spigen solves all these problems with the Perfect Armor, giving you the drop protection you need, but all the while making the iPhone a pleasure to hold and use. A++ here.Cons-• Lack of color choices. This should have been a no brainier for Spigen, but alas, currently black is the only color you can get the Perfect Armor in. Kinda sucks especially with Apple rolling out the new Rose Gold color hue. However, they do offer the Tough Armor in different colors but you'll have to be ok with a lack of a built-in front protector.• Port & Speaker openings: a little *too* Otterbox-y for my taste. This is probably the only thing I don't like about the Perfect Armor and is also the reasoning for my four star rating. The rubber flaps are kind of a nuisance when you want to plug your earbuds or charging cable in. On the Tough/Slim cases, there are simply cutouts in the TPU casing for the headphone jack, lightning port and speaker. If Spigen would have done the same thing with the Perfect Armor, it would have made more sense and been, well, perfect. Now, to some of you this may not be a big deal, but for me it is enough of a deal to warrant a four instead of a five star rating.Conclusion-The bottom line here is that Spigen's Tough series of cases are excellent, perform well, are priced right, and live up to their name. The Perfect Armor is no exception and brings to the table built-in front screen protection. These cases are some of the best on the market and I highly recommend them. If you want Otterbox protection but prefer a slim profile on your iPhone, look no further.**UPDATE 2/9/16**The Perfect Armor case has stood up well against many drops and proved to do exactly what it's advertised to do, which is protect the phone front and back. However, what's *not* advertised is that the Perfect Armor is not a perfect fit for the iPhone 6S, only the standard 6. For this reason, the case does not fit the phone correctly, as others have noted. The front part with the screen protector has a tough time going over the phone, and the main part of the case doesn't fit well on the bottom left corner of the phone due to the 6S's slightly larger dimensions. Aesthetics aside, the case will still work, so I'm choosing to leave my rating at four stars.💥💥💥NEW CASE REVIEW💥💥💥Spigen Tough Armor TECH 2/9/16For whatever reason, Amazon groups both the Perfect Armor and Tough Armor cases together so I cannot do a separate review for this case. Which is weird because they are two completely different products. Whatever! The Tech *DOES* fit the 6S correctly which was my only real gripe with the Perfect Armor. However, it is more in line with the other Tough Armor cases in that it is more of a glorified "bumper" case than the Perfect Armor. This of course means that there is no built-in front screen protector, so your phone will not be completely protected. There is also minimal lip, about as much as the standard Tough Armor, although it does have thicker beveling around the edges. There are also enhanced rubber corners on each corner. The thickness of the Tech seems to slot in between the standard Tough Armor and the Perfect Armor. I compared my phone with my wife's (standard Tough Armor) and my old Perfect Armor, and it pretty much splits the difference in bulk. Personally, I like it. I think it's the perfect thickness for a case. I like the color options, I chose silver, which is one option you don't have with the Perfect Armor. However, the backplate on this one is definitely cheaper and more flimsy than that of the PA, which had a sort of industrial grade rubbery quality to it. For that reason I don't expect the backing on this one to be as scratch resistant. There is also faux carbon fiber accents on the top and bottom of the back part of the case which is cool but would be way cooler if it was genuine cf as I love that stuff. I added a generic glass screen protector and am happy with the result. I don't expect this case to protect the front from shattering with the right fall, so neither should you, as this case is clearly not engineered to do that, so if you want the best all around protection but don't care about aesthetics or thickness, go with the PA, if you prefer a slimmer profile but are ok with being a little less confident dropping your phone, go with the Tech. 4/5 Stars

As a Dad of 5 young girls, my phone spends more time in their hands than mine. It is for that reason I spent hours looking for the perfect iPhone 6s case. I believe this case fits the bill. See my reason's below and then save yourself some time, give this case a shot--I think you will like it.Pros:Kickstand works very well, Perfect Fit, Screen Protector is built-in (so you don't have to buy any expensive screen protectors that may or may not show those frustrating air bubbles), Whole Phone Protection (my phone has survived 5 young kids), NOT Bulky, Fashionable Design. A+

So I've bought a bunch of stuff from Amazon but this is the first time I've ever reviewed anything. It is a fantastic case. It fit perfectly on the phone, everything lined up, and it feels very sturdy. I saw others had problems with the screen, but mine is just fine. There is a slight gap, and I do mean slight, like super-small, but it's really nothing that is noticeable in everyday use. The kickstand was pretty cool, and the sound is still clear coming from the phone. Overall, I love my new case.

Case itself is very good. Tough, easily absorbs shocks from accidental drops and fits perfectly on the device. Very solid cover, and the kickstand is a great convenience. Only complaint is the screen protector is made of plastic, rather than glass, so scratches rather easily. I've had it for a couple months now and there are a good deal of apparent scratches on the protector to the point they are distracting, so will likely have to order another Spigen case without the built in protector, and order a separate hardened glass screen protector to go with it. It did it's job as far as protecting the screen itself from getting scratched, but looks bad. If the screen protector was of the hardened-glass variety, I would have rated this 5 stars.

This is the Spigen case with a little stand to keep let it stand on it's own and you don't need it leaning on something.Putting the iphone 6s in it is quite easy. There is a spigen version that doesn't have this.The overall thickness still makes it quite low profile. Which I preferred. I didn't want a case to add too much bulk.I'm impressed with the feel. the Iphone 6s feels quite delicate and slippery. The case is not overly silicone feeling. It feels really good. Sort of between tough plastic and silicone. It's quite good. it's not gripping fabric when you put it in your pocket and a bunch of lint is on it, while anything else in your pocket falls out.It feels quite tough which i really like. I have had silicone cases that after a while just don't fit as snug.this case comes together quite easy and simply.the top part has a screen cover that will probably become hacked up after a while, but that's to be expected.it basically inserts into the back cover. No tabs to click or break.simple.it has openings for the ringer switch, speaker, camera lens (front and back) and the home button for the finger print sensor.there are covers for the headphone jack and lightning port. All other openings have clear plastic.The headphone jack doesn't insert into the jack that well, it seems too big, but not a deal breaker. I'd prefer if these tabs weren't therebecause inserting the usb cable into the phone is cumbersome and requires 2 hands to do. One to hold the tab open and one to insert.You used to be able to use 1 hand.overall i would get this case again.

Super solide et de bonne qualité a recommander elle est pratique protège vraiment bien mon iphone 6S depuis 2 ans maintenant

堅牢性に優れており、とても気に入りました。全面カバーと背面カバー構成、しかも全面カバーには液晶面保護シートがついており、液晶面の保護もばっちりです。カラバリがあるといいですね。

Usada en iPhone 6S. Se adapta perfectamente sin hacerlo del todo muy grueso. Es robusta y de calidad. Aguanta perfectamente pequeños impactos.

Ich habe das Case jetzt eine Woche um mein 6s und bin voll zufrieden.Es wirkt alles sehr solide, fest und nichts wackelt.Es ist bis auf kleine Fertigungskanten (die sich aber jetzt langsam durch nutzung abrunden) auch sehr gut verarbeitet.Das Smartphone ist gut geschützt, man hat ein wahres unzerstörbarkeitsgefühl da alles gut durchdacht ist.Trotz des recht dicken bildschirmschutzes funktioniert der Touchscreen wie gehabt und auch 3d touch wird nicht eingeschränkt.Klare Empfelung!