PERLESMITH Swivel TV Stand Universal Table Top TV Base for 37 to 65, 70 inch LCD LED OLED 4K Flat Screen TVs - Height Adjustable TV Mount Stand with Safe TV Anti-tip Cable, VESA 600x400mm PSTVS03

Pro's -Detailed Instructions. Parts are conveniently separated and labeled which means you aren't sorting through crap you won't use yet - which saves time!Good Parts: not flimsy or of poor quality. Plenty of configurations (M6, M8, washers too) so you won't have to go to home depot to get more parts when building this - you will have leftover parts you can use for your next project.Sturdy construction: Allen wrenches provided make sure you can tighten (not strip) every widget provided.Easy to build alone. I'm methodical, so it took a lot more than 15 minutes, but wasn't a science project.Cons - illustrations could use some "zoom" - sometimes it was a challenge to know which direction to orient the pieces when putting it together, but it wasn't a huge hassle. Just a few seconds of critical thinking.THE SWIVEL: This product is a SWIVEL stand. Meaning it swings right and left. That said, it probably needs more resistance. If I had a small child or large pet. I wouldn't buy this. Even when turning the TV off manually, it moves. It's not a dealbreaker for me, but I wish there was more resistance.Weight: I don't see any specifications that show the maximum weight. I understand they probably took that into consideration with maximum size, but it would be nice. Especially since the instructions admonish against "Exceeding the weight capacity" and not "size capacity". Model number is PSTVS03 - doesn't look like the manufacturer sells it anymore, but the product is warrantied.That said, it isn't easy making an aftermarket product to fit a large range of TV's, so I'm satisfied. It comes with an anti-tipping strap, and the price was right, AND it shipped in a timely fashion, even during a pandemic.

There are a zillion superficially similar products here on Amazon. I picked this one because it was one of only a handful that swivel, and it was the only one I saw that comes with an anti-tipping safety strap. This matters more than you probably think. You've got a lot of weight at a height, which is subject to being tipped over. This could be done by a child, cats chasing each other rambunctiously through the house, or even an adult who accidentally whacks into the TV while vacuuming or something. If it falls, you've destroyed an expensive piece of electronics, and it could easily hurt or kill a child or pet. For that reason, I think the anti-tipping strap is essential.As for the basics, it was easy to assemble even for extremely un-handy me (though some points in the directions could have been made clearer). It seems as sturdy as I could expect; it doesn't seem at all burdened by the 65" TV I mounted on it. And it makes that big screen sit easily on my 35" TV cabinet. It also elevates the set above my sound bar so no part of the screen is blocked. It doesn't at all hinder access to all the ports/jacks/outlets in the back. The swiveling is easy. I have no problem with it moving too easily or dropping down when swiveled, as another reviewer mentioned.I judge this thing to be damn near the perfect solution to the TV mounting problem I was facing. Very satisfied.EDITED TO ADD: I see that another reviewer said that his TV sits crooked. I can see how this can happen. When I had attached the horizontal supports, I noticed that they weren't level. I discovered that there is a little bit of looseness or play in how they fit onto the main vertical beam. I undid the screws and adjusted them, using a ruler to be sure that the ends of the two horizontal pieces were the same distance from the floor, then tightened up the screws. That fixed the problem, and my TV sits perfectly level on the finished product. But it's something you need to watch for; if you notice it only after the TV is mounted, you'll have to undo everything back to that step of the assembly, level them out, then re-assemble.

I had a 43" TCL 4K TV mounted in my den. I needed to move to the guest room but dont want to mount it on the wall again. This stand works perfectly. Assembling the main stand was simple and went together in < 20 minutes. The brackets that mount on the TV, a bit of a jigsaw puzzle to get the correct spacers and brackets. tried 5 times to get it correct - but once I got the correct spacers and washers correct it finished off really nicely. I set the height on the very lowest level, but the TV still sits a bit high. The weight of the stand is great - it counter balances the TV just fine without the retaining strap (included).If you TV is > 43"/48" I recommend using the step it will prevent the TV from tipping and sure it up.The stand is STABLE, SOLID & HEAVY. This thing weights more then my TV.

I got this swizel stand for a new 58" tv that replaced my old Panasonic plasma with a built in swizel stand. I needed this function in the new one because 1) I watch the tv from two different rooms, and 2) these LED screens have awful off-center viewing characteristics.This stand solved the problem for a very reasonable price. Easy to put together and sturdy enough for these newer (lighter) tvs. The only complaint I have is the lack of a cable troff to had cables coming off the back.