JoyTube Heavy Duty Metal Nut Splitter Set Bolt Buster Cracker Breaker Tool Broken Damaged Corroded Screw Nut Removal Splitting Extractor Kits

Receive the product today I needed it to break a 5/8 grade 8 15/16 nut that I was unable to get off by any other means including heat impact gun pneumatic gun breaker bar Etc I did place a little bit of oil on the tools screw and commenced to Breaking the nut ensuring it I had it centered on the flat side of the nut use the socket wrench for five or six turns to get it started and then use my 24 inch breaker bar at half turn each intervals, I Mark the Chisel end with a pencil to make sure that there was movement going towards the nut and after a few minutes going very slowly I heard the nut crack I removed the tool and placed it on 180° opposite side of the nut and repeated the process this time it only took about a minute for it to crack. After that I used a hammer and chisel and knocked the nut off with one hit. Looking at the Chisel end of the tool I don't see any damage or any deformation so I'm guessing it'll be ready for the next go around so far impressed with the tool it did exactly what it needed to do

Again pleasantly surprised at the quality durability.StrengthThese definitely are heavy duty and for the price.You can't beat it very, very happy and we'll buy more tools in the future from this brand

Awful Experience I recently purchased a set of nut splitters, and I have to say, this is the worst product I have ever received. The container arrived in a completely dirty condition, with bits of grass and debris inside. To make matters worse, the #2 tool has visible metal cuts, and the rear piece is entirely broken off, leaving the ring just placed to the side. This is unacceptable for any product, let alone one meant for use. I would strongly advise anyone considering this product to look elsewhere. Save yourself the disappointment and frustration!

I have not put them to use yet but they came well packaged and seem solid enough to do the job

I had a rusted nut on my tie rod end I couldn’t get off for the life of me. I had spent a few hours on it using all the usual methods of penetrating oils and tried heating it with a heat gun since I didn’t have a torch. The car is about 30 years old and still had the original tie rod ends and didn’t want to let go of this nut. I decided to give the nut splitters a try before resulting to cutting it off. I went ahead and took my dremel with a cutoff wheel attached and made a cut about halfway into the nut. That way the splitter wasn’t stuck doing all the work and potentially taking the risk of damaging it. Plus I wanted to return them if they didn’t work. Sure enough it split the nut with very little effort or force and I was able to spin it off. So looks like I’ll be hanging onto this set for the future cause I’m sure this won’t be my last rusted stuck nut. I recommend using a dremel or something to cut into the nut first about halfway and using the splitter to do the rest. That way the nut splitter should last a long time.

Like many have said, the little set screw is laughably undersized for the task. I had 4 tire lug nuts to break and the set screw sheared in two on the second nut. That said, it still works. The main problem is making sure the anvil doesn't spin with the tightening of the nut breaker. If you get good purchase, the tool still works. This works best in a flat application. Working inside the steel wheel of my trailer tires was a bit of a misery. Since the lug nuts are "recessed" inside the wheel there are only a few orientations that will work at all and the nut breaker keeps wanting to lift off of the nut. With a lot of effort, it did do the job. Because my lug nuts were REALLY rusted on, I had to break the nuts in two and three places to be able to then whack it off with a hammer and chisel. Bottom line is that it was a lot of work, but in the end, it DID work. It did take a couple of hours to get all four lug nuts split and hammered off. If it was working in an open and flat environment (say, a cylinder head) then it probably would have worked in about half the time. I plan to keep this set even though the set screw snapped. Still works, but just a bit harder to make sure everything stays lined up.

Perfect for busting nuts

Good quality has made life easier with rusted bolts