X AUTOHAUX Car Hub Centric Rings Wheel Bore Center 73.1 to 57.1mm - 4pcs Black Plastic

I bought a set of Konig Heliograms for my Polestar 2. The car has a 63.4 mm hub and the wheels have a 73.1 mm center bore. These centering rings were a bit loose inside the wheels, but fit snuggly on the hubs. The worst part of installing was jacking up the wheels.

Excelente producto lo recomiendo

Works but cracked one installing

Received the rings in a timely manner. Fit was perfect as ordered, and happily down the road.

These helped in the mounting if my aftermarket wheels. Car rides smooth!

Good product and worked perfect on my sons car.

Don’t run custom wheels that aren’t the same size as your hubs without proper spacers. These fit perfect.

All you do is have to order the right size

Bonne taille, donc convient !

Tenté de rejoindre le fournisseur 2 fois, jamais de feedback. À la poubelle !!

Sólo no comprar

Fitted some aftermarket alloys to my 2007 VW Passat with these. I was concerned about buying something cheap on Amazon, but they do the job perfect. I've learnt that they are only to locate the wheels on the hub. They are not load bearing. Its the contact between the actual hub and wheel that takes load. Once I fitted these, and before I fitted the nuts, there was no play, the wheel sat on the hub well. The car drives without any vibration (tested up to 90mph) The rings are rock hard, seem to be made well. But I’ll probably buy a second set just in case they get damaged or crack when I have the tyres changed next. Just make sure you use the correct wheel nuts. There are 2 types. 'Tapered' and 'Radius'. Tapered are often used on aftermarket alloys (if you're buying these rings, then you probably have aftermarket alloys) Radius are normally for genuine wheels that are made by the car manufacturer. If you use the wrong nuts you can crack the wheels.

Arrived as described.