27100 High Strength Threadlocker Red, 6 ml

I needed a threadlock for a couple of small set screws going into aluminum on a mower cylinder head. This went one easily and dried well. I did not try to remove the small set screw after it dried because it is something that will never need to be removed,, so I cannot say how tightly it locked the set screw in place. A little bit goes a long way, so the small tube will last me pretty much forever.

This product states that it will require heating up the parts secured with this threadlocker to 500 degrees in order to separate the parts after the threadlocker cures, so you really need to be sure this is what you want it to do. It was exactly what I was hoping for, and it worked flawlessly by holding a barrel nut in the handle of my Colt 45 that had a screw that would not separate from the barrel nut. I put the threadlocker on the barrel nut, attached it to my Colt, and the next day - today, I was able to get the screw out of the barrel nut, but it took some force to get it to break free. The barrel nut did not budge at all, so kudos to Permatex!

Great product and this little tube does the job and keeps on going. I was in search of a high temperature thread locker for a high performance engine rebuild. Product arrived fast and was reasonably priced, actually it was a few dollars cheaper than the retail auto stores. Permatex worked great in the application I needed it for and now I have plenty of left over thread locker if needed in the future.

I bought this for the screw in handles on my leather punches. Once I made sure the oil was out of the treads I put this on, screwed them in, and put some pliers on them to tighten them down. I have used it on 3 sets and not one has broken lose and I use them every day. Great stuff and I highly recommend.

I have worked on cars and trucks for most of my adult life ; you cannot do proper repairs to engine parts or rebuilds/ repairs without using a product like threadlocker to make sure your bolts and nuts are secured and not vibrate or loosen over time. It make you feel more sure your repairs will stay secured.

normally I use the blue thread locker for everything. I used the blue to hold a compensator on gun which had to be a specific orientation. After a couple hundred rounds it started to twist. This is when I looked in to how thread lockers work and more importantly that you loosen bolts and such by applying heat. Guess what happens to a compensator when you fire it? Yup. Bought this and for whatever reason thought it's in a tube I don't need to shake it like the blue stuff. Took to range next day and started to turn almost immediately. Realizing the err or my ways I shook it and applied again. It hasn't budged since One downside to this setup is to completely remove barrel requires to unscrew compensator. So at some point I'm going to have to be able to do that. I'm using a bore snake to clean barrel without removing it but at some point I'll try and heat it up with a heatgun and see if it nudges. I'll update this if I remember.

I bought this when i got my first antenna stolen from my car, i researched online what i could do to make it stay on for good or at least make it very difficult for thieves to get it off and then i found this and my oh my did it work like a charm. I even used it on my wifes vehicle as well and lend it to my relatives and parents as well.

I work on my 2002 4Runner (rarely needs it) and when it requires a product that keeps bolts secure I use this.

まあ、商品名の通りです。 ただ、着色が赤で手につくと消えにくいです。

works well when used as intended and directed.

nice product,

Lo utilicé para fijar el tornillo de una sartén, y vaya que cumplió lo prometido, a pesar de las altas temperaturas de la estufa de gas L.P. el tornillo se mantuvo fijo un par de meses, hasta que por el uso diario, y el detergente para trastes, se comenzaba a aflojar. Terminó por romperse la pieza donde iba el tornillo, antes que este se despegara. Definitivamente lo recomiendo.

Excellent product.Thank you.