SAWE - 44mm COB Festoon LED Bulbs For Car Side Door Courtesy Rigid Loop 1.73" LED Light Bulbs 561 562 567 (4 pieces) (White)

I bought these for the door courtesy lights of my Chrysler 300C replacing the filament bulbs at the bottom side of my doors. The door lights in this vehicle only turn on when the vehicle is parked and the doors are open to illuminate nothing but the ground. They work! Definitely very bright so that any other installation in my opinion becomes unnecessary. Eventually you can actually see where you are stepping and it looks nice and modern. Light temperature in my opinion is pretty cold and look like in the picture. Very easy to install as well, the plus (+) side is marked properly but they didnt break when I didnt get the polarity right the first time.When you take them out of the package for the first time there is a slight film of dust on them.I recommend this one.

I tried these out thinking the outcome might be different but same results: after installing the bulb (to replace the existing incandescent bulb), the rest of my interior lights either dimmed or would not turn on. I had tried a different bulb (which looked like a circuit board on the back and LEDs on the other side, and the same thing happened.) The SAWE bulbs did not have the circuit board on the back but that didn't matter, with my vehicle. I returned the SAWE bulbs, and will have to investigate further the reason, and in the meantime will have to continue with the incandescent bulb.

Slightly longer than the OEM bulb (by maybe a mm) but works fantastically super bright you'll have no issues seeing with these... only thing I CAN NOT speak on is the dome lights that fade out after they're turned off mine just turn on and turn off so I cant say if they flicker or not but seeing the quality of these I dont see that being an issue

I have bought two lots of these in the past couple of years, and they are very bright, indeed. Unfortunately, they either die suddenly, change color temperature, or flicker before they stop shining at about the nine month mark. Fortunately, there's no big explosion before they quit.

My camper-van used these style bulbs for the center mounted brake light. Two of the three bulbs were burned out and these bulbs were MUCH brighter. That's very much a good thing when it comes to brake lights. Needless to say, I replaced all three bulbs and it look great - and I still have a spare. The only minor glitch was that one of the bulbs was mis-marked for polarity, so I thought it was not working but removing it and installing it reversed "fixed" it. So if your bulb doesn't work be sure and try reversing it before returning it.

A simple solution to an age-old problem. No glass bulb to break or later go dim.

these are 12v DC only! I purchased many as a multi solution. - primarily for interior festoon light fixtures @ 120 volt AC input.. when installed (10 @ 12v = 120 volt in series ) a big spark and failure. I was unaware these were DC only. Some festoon are both AC or DC application @ 12 volt. I have to find another solution and source. I hope they fit my vehicle lighting. will report on that if it salvages my purchase.

Cheap and bright light made it work for my trucks Hood light mines was made for the twist end ! One great feature is the labeled the polarity of the led, but I’ll see how long they will last inside the my trucks engine bay!