MOOGK750304 Suspension Stabilizer Bar Link for Honda Odyssey

I always use Moog parts when available for my vehicles. They are reliable and built to last. I especially like the grease fittings which make them easier to service

Quality item great purchase A+

I really like these. They are beefier than oem and they have grease inserts. I noticed an improvement in stability, but that was from replacing worn out parts. Overtime, the grease points should keep it lasting longer. Keep in mind, everything is larger on this item. Oem nuts are 17mm, these will be 18mm. So, find your elusive 18mm wrench before starting.When installing, place a wrench or vice grips on the spacer behind to keep the bolt from turning.

Just want to share with other Honda Odyssey owners that this stabilizer bar link is a perfect fit for my 2009 EX-L model. This item comes with just 1 link so you must order 2 if you want to replace both sides. This same Moog link fits either sides so just order quantity of 2. I misdiagnosed my wheel noise and replaced these links (noise was actually from the bad strut mounts) but it turned out that both of my old links were bad (one end was loose), so replacing them wasn't a lost cause.

MOOG generally has great aftermarket parts, thus the reason I ordered these. I ordered 1 pair (2 units) to replace my worn ones on a 2010 Honda Odyssey.Pros: As expected, the MOOG part was better than OEM. The piece itself is made of thicker, heavier duty metal. It also came with a larger nut and grease fittings for maintenance. It fit exactly as the OEM part did, but should last a lto longer.Cons: I ordered 2 units from amazon. Both came with the same part number, but they were slightly different parts. I didn't realize until I already installed 1 side that the second one was different. Basically, 1 had pre-installed zerk fittings on the side of each joint. The 2nd one had holes on the back of each joint and I had to install the zerk fittings myself (they were included, just not installed). The links themselves are the same size, but I'm a little disappointed that the pair doesn't match. However, it should not affect performance so I'm ok with this and didn't want the hassle of returning...but did knock off 1 star as a result.

Great product

Easier product to install vs OEM (requires allen wrench to hold ball still while tightening/ removing. Ability to hit with grease a few times a year is a plus.

Fast shipping great product

Its well worth it to get the Moog over the cheaper version. These are heavier, and most important, they have a square on the opposite side so that you can put a wrench on it while you tighten the nut.Others and the stock, have the allen socket on the same side as the nut and it's an absolute pain. I had to zip cut the old ones off.

Very nice product /. Good quality. Having the flat edge at base to hold with a spanner was great when installing nut onto the bolt.The old one i had removed had Allen key at end and is not practical

I like that these have a spot to put a wrench in to back up when tightening the nut not like the Allen wrench spot in the front.These are great so far, my Honda Odysseys handling is nice and tight just how it was when new.

Mechanic said it was P