80 mil 18 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

We got this sound deadner for my boyfriend's work van and it made a huge difference. It doesn't sound like we're traveling down the road in a tin can anymore. Road sound is non-existent. It is really easy to use. I purchased 2 different sizes rollers and used a heat gun to soften the tiles prior to applying to the curved areas and it worked perfectly. Just as good as dynamat. But much less expensive. No odor. We purchased 2 boxes and that completely covered the whole interior surfaces with some left over. Very impressive. Highly recommend. You won't be disappointed.

OK, first of all I've been professionally taking cars apart and putting them back together for the last 7 years as an autobody/refinish tech. You see some cars with little to no sound deadner and some higher end cars with lots of it. Eventually you come to see/hear/feel the difference this stuff actually makes for cars that didn't have it at all or have very much of it. We've always used the 3M sound deadner pads that are shiny, black, and come 10 large (19"x19") squares in a box. Did a 2008 Crown Vic with those, they worked well. Those are much thicker than this stuff and weigh a fair amount more. (NO, I'm not complaining about weight) I just always thought that if it was heavier it HAD to be better. Well, I'm working at a different larger shop now, and it would've been harder/more expensive to get the 3M pads, so I gave these a shot. I had to do a 2011 Hyundai Santa Fe for noisy/hollow sounding doors, a couple of which pinged like a drum head when they closed, thanks to the foam/adhesive breaking down on the diagonal support inside the door that the door-skin is bonded to. So, I did a few big strips, (it does not need to be completely covered!!) inside all 4 passenger doors, and rear gate. The stuff cuts good with a sharp box-cutter (watch the foil edges) Also, it sticks very well when pressed or rolled into place. I then added some Noico red foam to help with additional road noise dampening and insulation. I know some people complain about the "smell" but I never noticed it at all in the Hyundai or my 2018 F-150. This stuff worked great! got rid of all of the pinging/hollow sounding doors and it also gives you a pleasant increase in sound quality/bass response even with stock speakers! The Hyundai doors now sound like closing the doors on a car 3x its price tag with by doing that. They sound nice and solid now when they close. I also did all the doors on my 2018 F-150 with the other half of the box of this and the Noico foam, good results there too!! I will still have a small amount leftover that will go somewhere in the F-150 cab. Good price! Definitely recommend to get rid of hollow/cheap sounding doors or added for those looking for better sound!

Worked great in my Jeep. Easy install and helps keep the noise down.

Good stuff i was able to install this just fine in my 2014 ford fusion before new sound system. It does work. My sound quality increased. Seems very durable. Coverage is great.

Good product. Easy to apply and work with. Only issue i had was tearing through foil when I tried to shape it in a tight place or corner

Works great , I bought two boxes and was perfect for a small single cab truck. It really made a difference with noise reduction. I have a subwoofer in the truck and have no rattling from the bass .

This is a way less expensive alternative to Boom Mat. A friend gave me some Boom Mat but it wasn’t enough to do my truck. I ordered this because it’s way cheaper and, logos aside, I could not tell the difference. Excellent adhesive. Fairly easy to confirm. New carpet smelled way worse than this. Could not smell it, even on a hot day.Noticeable sound and vibration reduction.Tips: cut it with a utility knife, fresh blade. The rollers you can buy separately are worth the minimal cost. Makes for better contouring and adhesion.

I'd say this product worked out great! I was considering the more expensive option then decided to go with the Kilmat and glad I did, half the cost and works just as well. Rather easy to install, my only recommendation would be to have a heat gun handy while installing. I installed in my garage at 65° temps and was boarder line to cold, a little heat to warm up the tar material and bam it stuck like glue with using a roller application tool.. I would highly recommend.....save the money.