





Desertcart purchases this item on your behalf and handles shipping, customs, and support to Philippines.
🖨️ Elevate your 3D printing game with the ultimate flexible build surface!
The Creality Original Ultra Flexible Removable Magnetic Build Surface is a 235x235mm heated bed cover designed for Ender 3 series and other FDM 3D printers. Featuring a magnetically secured, ultra-flexible surface, it enables effortless model removal without tools. Its customizable size and universal compatibility make it a must-have upgrade for professional and hobbyist 3D printing setups.


| Brand | Comgrow |
| Colour | Black |
| Compatible devices | Laptop, Personal Computer, Smartphone, Tablet |
| Item weight | 0.25 Kilograms |
| Material | Metal |
| Product dimensions | 23.5D x 23.5W x 0.1H centimetres |
O**D
Does the job well.
I replace these build plate mats periodically. I find they work well and the 3d printed items adhere well. They do eventually wear out but I feel they endure pretty well. I buy these as I feel I can rely on the quality. They stick magnetically to the heated bed and I have not found a need for the self adhesive magnetic sheet supplied.
M**R
Does the trick.
Dead easy to use. Prints stick to the bed but release ok when bed is flexed.
J**W
Highly Recommend
This product is fantastic. I have a Ender 3 pro that came with a glass bed, very quickly this started to not work as well as it did when it was new so I invested in this product. The adhesiveness is brilliant, prints come out clean and consistent, and the magnetic features makes removing the prints way easier. My auto leveller did lower my print head into the bed damaging and making around half of my bed unusable, after 6 months of printing in the exact same place the bed has stopped being so consistent, but I’ve had no hesitation to replace it with a new one.
S**8
Okay
It's good but after some use the pull tab starts to degrade and eventually comes off. I think the glass one would be better for more constant use.
C**E
Good flexible print bed
I have only used this a few times but so far I'm very pleased with the bed. It is much more flexible than my original bed and it is easier to remove prints from. The installation was easy enough, although it would be nice if it was directly compatible and I didn't have to install an additional layer to the bed - I have an ender 3 v2 Neo. Strong enough magnets but still very easy to remove from the bed.
A**W
Convinience vs quality
The first time I tried to scrape something off the standard print bed of my Ender 3, I stabbed the spatula in my wrist, so I was eager to get this to make it easier to remove stuff. And, it works for that - a bit over a month and a roll of filament later, it has worked well for this. But. As time went on, I did notice some oddities in my prints - I thought the bed was levelled properly, but then in printing they'd be too close to the bed in large patches, causing first layer issues. I only noticed last night that it's because the flexible bed has gotten very warped and bumpy in the middle. I know high temperatures were to be avoided with this, so I have - I'm usually on 50, once or twice 60, so I don't think that was it. It seems, and I am uneducated in this area so could be wrong, that repeated prints to this area have caused the issue over time... I wonder if printers (or splicers) should have an option to randomly offset the build position of models, rather than always using the center? In any case, I'm probably going to have to go back to the base Ender 3 plate, and risk the stabbings. Umm, anyone know how to remove the adhesive lower plate from the Ender 3 once it's on?
M**C
Wish I had one sooner
I can’t believe how well this surface works. I only decided to try it when my glass bed unexpectedly shattered half way through a print. I use a BL touch and this surface maps as even flatter than the glass. First layer adhesion is reliably good and watching the first layer is easier as the filament is a lot more visible against the mat surface. I have only tried it with PLA and PETG so far but I can’t see why any other material that I can print on my Ender 3 V2 will be a problem.
K**E
Better than the one that came with my Ender 3 S1 Pro
Works well and I like that it is flexible to ease removing 3d prints when done. Make sure you stick the under layer on your printer plate facing the right direction. I didn't spot that the magnetic hold works strongest from one direction. Read the instructions like I didn't. Anyway, now I have it facing the right way, it is excellent 👌
C**N
Perfecta con una Ender V3 Pro
El tamaño es perfecto y la adherencia correcta
A**Y
Magnetic bed
Looking forward to upgrade my stock bed with this magnetic bed!
A**.
Resistente y protectora
La funda tiene muy buenos materiales, por lo cual protege muy bien, pero no se puede utilizar la impresora mientras está puesta. Es suficientemente amplia y con la estructura adecuada para quitarla de la impresora por arriba mientras vas a trabajar, Posteriormente la vuelves a colocar. Ha sido resistente. Si te gusta tener tus equipos bien protegidos esta funda es muy recomendable. Todo llegó en tiempo y forma correcta y el armado no es complicado.
S**O
nie polecam
Magnes bardzo słaby, ledwo trzyma się stołu za to wydruki trzymają się tak mocno że trudno je oderwać. Moim zdaniem to nie jest oryginał.
R**T
La qualité et le prix
Pas encore utilisé
Trustpilot
2 weeks ago
1 day ago