🌟 Light up your rig, own the vibe!
Speclux PC LED Strip Lights feature 54 vibrant RGB LEDs powered by an efficient 14.4W system, compatible with major motherboard RGB sync software. Designed for mid-tower gaming cases, this dimmable, lightweight strip offers seamless plug-and-play installation via a 12V 4-pin header and includes a remote control for effortless lighting customization.
Brand | Speclux |
Package Dimensions | 10.1 x 9.6 x 4.2 cm; 107 g |
Item model number | BS-SL014-54L-RGB-DE |
Part Number | XE-RL07-XVHD |
Number of Items | 54 |
Number of Lights | 3 |
Included Components | Remote Control |
Voltage | 12 Volts |
Special features | Dimmable |
Power and Plug Description: | Corded Electric |
Batteries included? | No |
Batteries Required? | No |
Type of Bulb | LED |
Wattage | 14.4 watts |
Item Weight | 107 g |
Guaranteed software updates until | unknown |
Z**Y
It works! Genuinely impressed.
I just transferred my PC into a new case, which has a window in the side. I don't normally spend much time looking inside my computer, but it seemed a shame not to be able to see what's in there.My ASUS motherboard has a four-pin RGB header, so I looked for suitable RGB lighting strips. This one stood out, mostly because it was very cheap.It's brilliant (pun intended).The kit includes a splitter cable which splits one RGB header into three, an extension cable, and the three strips.The strips have adhesive on, but I didn't use it because they are also magnetic. They stuck firmly to the inside of my case, and I haven't felt the need to use adhesive instead.I had a minor faff getting the plug to fit my motherboard header, but I think that was an issue with a bent pin on my mobo, and not the cable. The cables are long enough for me to put a strip on each side and one across the top, and still tuck the cables away fairly neatly.Full disclosure, I'm having an issue with ASUS Aura, and it won't detect my Mobo's RGB riser. This seems to be fairly common and is nothing to do with the LED strip. However, it does mean I can't confirm whether or not it works with Aura Sync. What I can say is it works with ASUS AI Suite 3. That only gives limited control, but I am able to change the colours, change the flash cycle and type, and turn it all off.To be honest, that's about all you CAN do with a four-pin RGB header. To get the full rainbow-vomit effect, you need ARGB (Adressable RGB), which my motherboard doesn't support, and neither does this kit. This is specifically for 4-pin RGB, NOT ARGB.I did have to turn the RGB header on in my BIOS. If your strip doesn't light up, check that the RGB LED header is enabled.I'm happy with this kit. For £12, it's doing exactly what I wanted.
S**K
Works well on supported motherboards
I am building a new computer and decided to go with RGB lighting.These strips work well on my Asus TUF Gaming x570-Plus motherboard (in my ThermalTake Tower 900 Black Edition case). I am using Ubuntu 20.04 and OpenRGB (without any additional kernel compiling/etc).Without any controlling software (or on power-up) the lights will probably cycle through the colours.Magnets seem to be good enough though I will use the built-in adhesive tape once I've finally decided on placement.
J**L
Love it
Not the best value for money, but do their job well. Easy to fix in to a large computer case, and with the extention cable and splitter, make it easy to route all three rgb strips where ever you want into your case.Just make sure you have an RGB header on your mobo as this doesn't come with a controller or sata connection. Works fine with my MSI X570 A Pro mobo, with Mystic Light installed you can change the lighting to however you want.
O**S
Great product
Bright and vibrant colours they make my case look amazing easy install as well
M**L
Great lights
So simple to install even I could do it. Took a few minutes of which most of the time was spent around figuring out where would be best to channel them. Highly recommend if you want to bling your pc tower.
B**D
Shame about curling
You can change colours and turn brightness off and low but the magnet did not stick well to my case and kept falling down and curling, i could of removed the backing and used the sticky part but then what i the point of magnet
C**Y
Waste of Money.
Simply to do not work. My motherboard has a 5 pin connector however it should still power a 4 pin connector if connected properly. Tried it in one of the 4 pin connectors and it still didn’t work. £20 down the drain. Also, magnets are terrible. Merry Christmas.
A**A
Works well !! ( .. do your homework & research what motherboard you use !! )
Did alot of research and decision-making , before purchasing these LED-RGB set !I own a Gigabyte motherboard , w/ RGB Fusion 2.0 software.ALL LED lights work well, and co-exist perfectly together.Comes with ...3x 20cm LED-magnetised or taped -strips;1x 3-way cable-split: 4-pinned adaptor;1x 1-Cable : 4-pinned cable.... and some instructions / warranty paperwork.(No 3-pin adaptor/s or -cabling)Almost brought the NZXT LED-setup ... but didn't want to succumb , to Over-Spending !Budget LED-RGB lighting ... good value , all things considered.Lets hope, LEDs last over 12 mths ... then the 5-star-rating would be justified here.
Trustpilot
2 days ago
5 days ago