CARROFIXNon-Powered Taillight Converter with 20" Inches Leads and 60" Inches 4-Wire Flat Extension Vehicle End Connector

I would not recommend this unless you have a lot of experience dealing with automobile wiring and have access to detailed wiring diagrams for the vehicle you intend to use it on.This device did not come with all the pieces shown in the picture, the wire-tap connectors and the ties were not in the very small box. Also, there were no detailed instructions, just a diagram on the outside of the box. I had to search online for detailed wiring diagrams for my vehicle, and even when I found those, I had to read through almost a hundred pictures to find the information I needed to tap into the correct wires. Also, expect to use some extra #18 wire to make longer runs when wiring both right and left.One other thing, this is only for a car that currently has LED lighting and a trailer that has LED lighting. If your Carr has regular incandescent bulbs, or your trailer draws more than two amps, you will likely fry this device. If you are worried about the power draw, just buy a kit that has a connection to your battery.I eventually got this to work, but it took hours to find and then read through all the information on the web. My skill level is high as I am an electrical engineer, and was once a licensed electrician. If it took me hours, then I fear less skilled people might get lost trying to install this.

Didnotcomewithclips&tiestrapsasinpicture&productdiscreption!!! Thanks a lot!!!

So I have a 94 mazda b4000..this worked perfect..took those seperate brake and turn lights and made em 1 for the hookup💯👌..buy it you'll thank yourself.

Did not work. Could not handle the load of my leds. Ended up getting a used one off a junk car from scrap yard

Worked perfectly, easy install if you know your wiring.

Trailer light Nervana

It didn't come with coil of wire nor connector.Can't use it! Plus it's only 3 wire...

Working perfectly, great product