3'' 17 Ft [Quick Installation] PVC Decorative Line Cover Kit for Ductless Mini Split Air Conditioners, Central AC and Heat Pump Systems

Easy to install and worked amazing to protect my new linset for the mini split AC. Looks clean once installed

Easy to work with. Great choice

It was ok

Plenty of pieces to make the cover work for most any situation. We had our line set already installed before the set came. Was easy to attach and put together. Had a long run 17 ft after a little modification to the flex pieces covered everything

Great product

The finished product looked fine, but they were a lot of headache. Unfortunately, they don't snap together. You put on the top piece and then you put the long piece over the mini split lines and push it up to make sure it presses on the tiny rim just right, but don't let it slip one iota and go too far up. Then, you have to place the connector piece at the bottom and mark the spots for the anchors without letting any of it move even slightly. The flex pieces are not covers but go around the lines so they have to go on before the connections are made to the system, but it is really hard to know how that is all going to come together before you finish. I needed a 2nd person which I didn't have. I will keep looking for better systems, but the price wasn't bad and the end result was fine.

Used to cover piping of a mini split ac. It worked great. Had to go down and around electrical pipes and around the corner to the compressor. Very easy to install.

I my first minisplit used the senville kit. It had much thicker plastic joints that attached with screws. Bought this kit with a Mr cool system and there were issues, the flex tubing reduces the inner radius such that the lines would not fit. The long straight pieces were identical to the senville kit. I could not get the quick connect pieces to stay together. For Mr cool probably need 4 inch kit, this one was too small. I had enough of the connectors from the other kit to make this work but if you are using a Mr cool mini split avoid this kit.