Stadea BFC101K Buffing Polishing Wheels for Bench Grinder 6 Inch | Pro Grade Extra Thick (90 Ply) White Super Soft Cloth - Pack of 2

Thick buffs that work well with blizzard polishing compound to put a mirror finish on mild steel. I buff broken surfaces that tear up wheels. Hour of use and little wear so far

These buffing wheels are a great value. I read some of the reviews that these could create lots of vibration but I tried both of them on my 1750 RPM buffer and they run smooth and straight with no vibration that I could detect. These wheels are sewn tightly with 6 rows of nice stitching. They have a 5/8" arbor bore, they are 1 1/8" thick and a full 6" in diameter. Overall this 2 pack is very nice and well worth ordering.

Good but firm. A few scratches when I was looking for a smooth finish but overall a good deal

I have never used buffing polishing wheels of this type before I got into shining my tobacco pipes, woods & stems. I initially bought 70-ply wheels, they were cheaper but worked out decent. However, the last time I elected to buy Stadea 90-ply instead & the difference was huge, imo. First, there is much less mess of loose fur flying around. Secondly, these are firmer and provide better contact with the work piece. I admire the results when using with Manzerna polishing compound. In retrospect, I should have bought these initially as well because results have been much better with less effort, understandably at a higher cost though, however not by much.

Wow!!! These are VERY PROFESSIONAL. I first ordered some kind of 50 ply wheels and boy did they SUCK. So I sent them back and found these. These will last a long time. Thank you for such a GREAT product and actually sending me exactly what’s in the picture. The hole is just a hair bigger than the shaft so I had some 5/8” aluminum fuel line laying around and I made a couple of bushings about 5/8” wide and they fit PERFECT in the center hole and fit TIGHT on the shaft with zero vibration. 😁👌🏼

Fibers stay and polishes well.

Both buffing wheels are out of balance. I have a sturdy wood table for my bench grinder, and when using these wheels it shakes everything off my table. I can only use for a short time, I'm afraid it will damage my grinder. Will not buy these again.

One of the wheels was great, the way the other was sewn caused the center hole to be at an angle, creating vibration when spinning.....maybe it will settle in with use. Not worth the hassle to return one wheel.