CNCTOPBAOS 3 Axis 1610 PRO Mini CNC Router GRBL Engraving Milling Machine

Had a problem with the linear bearing which is resolved by myself, but seller is helpful and respond is prompt. Must have some basic mechanical intuition and be expected to pick up diagnostic skills, which is a requisite anyway no matter which machine you decide to purchase. No fundamental issue with the machine design, great value for money if you know how to work around it.

The instructions are really bad, they show assembling the unit, but don't show that you have to install the T-slot nuts until the next page. Also, the t-slot nuts were a bit tight, but scraping a few times on either side with a file was enough to make them work. All the couplings are held purely by friction, which is somewhat concerning, but not a real problem considering the size and price of this thing.

Software is not working fit and finish good

not worth wasting your time with, can hand carve anything in the amount of time you will spend troubleshooting this machine, not a good product

Its simple enough to set up. But figuring everything out on the computer is on a whole nother level, its not simplified in anyway

I just feel that for the money paid out that the work size would be more functional in its size. Can,t do to good of a build as the work surface is quite small.

Amazing

What a nice surprise! The item arrived quickly in a good package. All is well placed in styrofoam. Comes with clear english instructions. Even without a manual, it's pretty easy to figure out how to assemble. Comes with all screws and tools (Allen keys). The frame is made of think and strong Bakelite and all the extruded parts are aluminium; some natural, the rest is black. The spinder holder and assembly is molded injected plastic but very strong. Motors are nema 17 and are quiet in operation. The controller comes with the CNC and is really to install and configure. Software is on an USB key provided. Took me about one hour to assemble and setup. The only this is the power and quality of the motor. This is a very common cheap brushed motor, nothing to call your mother about. The mount however, would allow you to change for a Dremel or another more powerful motor. Than being said, you also have an option to put a laser module as the conector is already provided on the controller. Good bang for the buck !

First look was nice, but problems started with a corrupted flash drive, leaving me without instructions or software. Since there isn't a brand name, finding those online was a hustle. Once I finally assembled it and found software for it, I ran into a new problem. About two minutes into my first engraving the Y-axis started to slip and even disconnect from the step motor. It took several tried, locktide and a husband to get it working, but it squeeks a lot now. I got two or three very simple test engravings done, then the X-axis began to slip (see video) so now I have to get that one fixed. On top of that I also had to fashion my own clamps, since there weren't any with the machine. The bits coming with the machine where also a little disappointing since it's just ten bits of the same kind. All 20° v cut, limiting the kind of engraving you can do until you order additional bits. Now that I managed to have the machine working, the results are quite good, especially considering that it is my first encounter with CNC. As troublesome as the machine was in the beginning, the customer service was excellent. The company picked up the costs for making it work and is sending out the missing clamps. I do think it's a good machine to start with and figure out if cnc is for you. And just because mine was a bit trouble doesn't mean they all are.

Really nice little machine. Light and easy to tote around. Easy to assemble. It came quickly (I got mine next day as that's the delivery option I chose). Highly recommend. If you need any help I am darcy at inventorArtist.

It's neat but totally useless to me. How do I make a GCode or NC file of just simple words to print. I thought it would be easy but I don't know or understand what software I need to download to make it work??? Help!

Ok