Yoaoo 1x OEM Black Grille Z71 Emblem Badge 3D Compatible with Silverado 2500Hd 3500Hd Sierra Tahoe Chrome

I'm writing this review for others looking to purchase. This is a high quality metal badge for your truck. It looks great, just like OEM.The factory badge removes easily by prying it off. There are locating pins on the factory model that protrude through the grill. On some trucks (like my 2016 1500) it may be necessary to cut off or squeeze the tabs on the back so they come out of the grill. Once that is done, just pry it off. You'll see GM uses sticky tape too.On my 2018 2500HD there are locating pins on the factory Z71 badge, but they are smaller than the holes they go through, so they just come right out. Once you gently pry the old badge off, put 3M double sided tape on the back of the new one, line it up, and press it on firmly.I can absolutely guarantee it won't come off. My last one survived an impact with a concrete wall at 60 mph thanks to some non driving idiot. Despite the near death experience for me, the Z71 badge stayed affixed perfectly to the grill.The point is, these are super easy to install. The clamp is not even necessary. Just some sticky tape and you're good.

Seems to be better quality than the stock emblem. Replaced the existing grille emblem on my 2017 Z71, exact same size. Didn't use the stub/bolt it came with (and not sure how you could). OEM was mounted with tape and I just did the same with 3M auto double sided tape. Easy off (with heat gun) easy on, looks great!

Badge looks great. Needed to slightly modify the included bracket and grab some different hardware to mount it the way I wanted but for the price I’m very happy.

Great looking grille badge, good quality, only thing that could make it better is a if the single threaded bolt could thread into the back a little more or if it had 2 bolts that thread in the back. Other than that it's Great.

Good

Threaded bolt will not stay attached to back of emblem. Threads will only make one revolution. They could of made it with more threads, but what do you expect, made in China. Also could use nylock nuts as the supplied one will back out as other customers have claimed. Don't waste your money, you'll thank me!!

No directions given or anywhere here or google. After looking at it I noticed 2 holes on the back of the emblem. Fine, threaded shaft will screw in to center or offset hole on back of emblem then can be placed on grill and the backing plate,nuts, and washers can be placed on the inside of grill and screwed down with the supplied nuts--I used red locktite on the emblem end and blue on the nut end.

Ordered white and the paint is just a sticker. Tighten everything down as good as I thought needed to be done before I broke something. I should have used loctite because it fell off barely a week later. Very disappointed.

da un toque discreto pero bonito a la parrilla, super facil de poner, no necesitas quitar la parrilla para instalarlo, mete la mano por el gancho del cofre

Product exactly as described. Easy installation

Se ajusta bien se ve muy bien lo recomiendo

You get what you see

thank you