Vaydeer Undetectable Mouse Jiggler M4 Driver-Free Mouse Mover with Switch | No Software Needed, Silent Motor, Physical Movement, Keep Computer Awake, Remote Work and Office Use

The Vaydeer Undetectable Mouse Mover works exactly as advertised. It was incredibly easy to set up—just plug it in and place your mouse on the device. The movement is smooth and quiet, and it does a great job keeping my computer active without any interruptions. I also appreciate its sleek, compact design, which doesn’t take up much desk space. Overall, it’s a reliable and well-made product that delivers on its promises. Highly recommended!

it works great, it's moving and you don't realize it's moving until you look at your computer screen.

This mouse mover is simple, quiet, and genuinely undetectable from a software standpoint since it physically moves the mouse instead of installing anything on your computer. The M4 design is compact and easy to set up—just plug it in, place your mouse on the pad, and it starts working with no drivers or configuration needed. The movement pattern is subtle enough that it doesn’t jump the cursor all over the screen, but it reliably keeps the system from going idle during long calls or video sessions. Build quality feels solid for the price, and the on/off control makes it easy to switch between “active” and normal use without constantly unplugging it. If you need a hassle-free way to prevent your computer from locking or showing you as away, this is a very handy, low-profile solution.

It’s quite, keeps my porch light on Teams green between calls! Love it!!

As with many buyers mine started ticking loudly about month and a half after I got it. With it sitting right in front of me all day this was a deal breaker. I decided to open it and see if there was anything obvious that could be done. The steps are very easy; no expertise needed, just a few small tools. First use a 1.5mm allen wrench to remove the small screw in the center of the black disc. Set this aside, making sure to not lose track of the small parts along the way. The rubber feet peel off easily and using an extra small #0 phillips head will get the four screws out. Separate the top slowly as the motor is connected to the base by a non-removable wire to the board. Separate the wire from the plastic guide in the top to provide some slack and lay the two next to each other. Using a #1 small phillips head remove the two screws holding the small motor in place. This can be slid out and set back in the base facing up. Then use your fingers to gently pop the black disc out. You should then have the disc, the top with the bearing exposed, and the base with the motor facing up. Plug the base back in and it should automatically turn on (the orange button just sits there and can fall out. Not a big deal, set it back in if it does). I never hear any ticking but I applied a bit of pressure with my finger to spinning part on top motor figuring, maybe that might help? I then rotated the bearing around and back and forth. I never hear any ticking specifically, but also figured it couldn't hurt. I then reversed the process, reassembling everything. When I plugged it in, no ticking! All told it was probably only 3-5 minutes of tinkering with it. It's been quite for days now. I think the only other thing I might do if it starts back up again would be to apply a very tiny amount of oil to the bearing (making sure nothing is left sufficient to drip down into the motor on onto the board). Not an expensive purchase, but the few minutes of work are totally worth it to avoid the ticking headache! Hope this helps! Edit: Taking it entirely apart might be overkill. I found loosening the 1.5mm screw on the black pad will caused it to tick, tightening it stopped it. So, instead of eight to ten steps seems like one might suffice. Edit 2: It clicked less for a while, but started back up again. Readjusting helps, but doesn't solve the problem. I still am upgrading from three to four stars though for the customer service. They reached out and were very helpful and willing to work with me to address the issue. They sent me a replacement and so far so good. Overall, for the price, this is a good solution with great customer service.

I’ve been using the Vaydeer mouse mover with a Logitech Pebble mouse, and it works exactly as intended. It keeps the cursor active consistently without any connection issues or interruptions. One thing I really appreciate is how quiet it is. The movement is smooth and practically silent, so it doesn’t become distracting even when it’s sitting on a desk all day. It just runs in the background without drawing attention. It is a bit bulky compared to smaller mouse movers, but in practical use that hasn’t really mattered. It stays stable on the desk and the larger platform actually makes it easier to position the mouse securely. Overall, it’s reliable, quiet, and does its job perfectly. If you’re using a smaller mouse like the Logitech Pebble and want a dependable mouse mover that works without noise or hassle, this is a solid option.

Works like a charm. It is exactly what I needed, and it was not as bulky as I thought it would be. I would buy this again.

I have a Mac computer I used for work that is administered by our IT department. IT controls some of the settings, one of which is the screen timeout. It times out after just a few minutes. I am often doing tasks on another computer (for work), but have my main computer active to show my emails and messaging app. It drives me crazy when I am working on the other computer and my screen on my main computer shuts off and I have to re-log in - again! This mouse mover has solved the problem. I keep it plugged in next to my main computer and place it just off to the side of my mouse pad. Whenever I have to use the other computer, I just place my mouse on the mouse mover instead of on the mouse pad and it keeps my screen active while I work on the other computer.

Using this device for more than 3 months now, If you are working from home and If your employer tracks how long you have been on, this device is mandatory, gives time for doing your own work in between.

Simple mais fonctionne. Ne fait pas de bruit en fonctionnement.

Works perfectly

Pratique et conforme à mes attentes.

Es perfecto para lo que necesito. Puedes escribir en papel sin el problema de que el salvapantallas salte cada 5 minutos, y el movimiento del puntero es suave y aleatorio, de forma que tampoco molesta a la lectura de pantalla.